D-Link NetDefend DFL-860 Manuale utente

Network

Security UTM Firewall

This Quick Guide will guide you through the installation Process. You are

only moments away from using your new D-Link Network Security Product

Building Networks for People

DFL-860

1.Before You Begin

1.1 Check Your Package Contents....................................................................1

2.Indentifying Components

2.1 FrontView.................................................................................................2

2.2 LED Indicators...........................................................................................3

2.3 Default Interface Attribute Definition.........................................................3

3.Connecting the DFL-860

3.1 Setting up Firewall to your Network........................................................4

4.Configure DFL-860

4.1 Configure your Computer’s IP..................................................................5

4.2 Using the Setup Wizard.............................................................................6

5.Appendix

5.1 How to Configure Static IP Manually on Microsoft Windows XP..............14

5.2 How to Configure Static IP Manually on Apple MAC OS X...........................15

6.Statement

DFL-860 Quick Installation Guide

1.1 Check Your Package Contents

Your NetDefend Network Security UTM Firewall package should

contain all the items listed below. If any of these items is found

damaged or missing in your package, report it to your reseller

immediately for replacement.

DFL-860 NetDefend™ Network Security UTM Firewall

Power Cord

5V DC Power Adapter

Console Cable (RS-232 cable)

Ethernet (CAT5 UTP/Straight Through) Cable

Ethernet (CAT5 UTP/Cross-over) Cable

CD-ROM (containing QIG/Manual )

Rack Mount Brackets

2 x NetDefend UTM Subscription (IPS & Anti-Virus)

DFL-860

Before You Begin 1

DFL-860 Power Cord Power Adapter

Ethernet Cable

(Straight-Through)

Console Cable CD-ROM

Ethernet Cable

(Cross-over)

Rack Mount Brackets

NetDefend UTM

Subscription

Identifying Components 2

The following illustrates the front panel of the DFL-860 and

explains the front panel’s key components:

2.1 Front View

1 2 3 4 5 6

1. Power LED

2. System LED

3. WAN Ports

4. DMZ Port

5. LAN Ports

6. Console Port

Power indication of the DFL-860.

System status indication of the DFL-860.

These are for the connection of an Ethernet cable to a Cable

or DSL modem.

This is for the connection of an Ethernet cable to an DMZ

network.

These are for the connection of Ethernet cables to the internal

network.

Connects to RS-232 console cable that connects to PC.

The console port is hidden behind a protection coverlid that

can be opened by pulling down the lid.

Note:

None of the WAN1 and WAN2 interfaces support Auto MDI/MDI-X

(Automatic cable detection for Straight-through and Crossover

function.

2.3 Default Interface Attribute Definition

Note:

NetDefendOS only allows Web GUI access from LAN port by default

for security consideration. Please refer to user manual for more

detail about how to change this conguration.

DFL-860 Quick Installation Guide

Wording on

Front plate

Default name

in rewall

Default interface

type denition

Default interface

IP Address

Default

DHCP Status

WAN1 WAN1 DHCP client N/A Enabled

WAN2 WAN2 Static IP 192.168.120.254/24 Disable

DMZ DMZ Static IP 172.17.100.254/24 Disable

Ports: 1~7 LAN Static IP 192.168.1.1/24 Disable

2.2 LED Indicators

Status

Solid green

Light off

Solid green

Light off

Blinking green

Light off

Solid Green

Blinking Green

Light off

Solid green

Description

The device is powered on.

The device is powered off.

System is operating properly.

The device is not working.

System is defective, such rmware

upgrade fail.

No link

Link present

Port is sending or receiving data.

Port is operating at 10Mbps.

Port is operating at 100Mbps.

Color

Green

LED

Power

System

Phone Jack LED

light (right)

Phone Jack LED

light (left)

3.1 Connecting Firewall to Your Network

A. First, connect the power cord to the receptor at the back panel of

the DFL-860 and then plug the other end of the power cord to a

wall outlet or power strip. Then powered on the DFL-860 using

the on/off switch. Now the Power LED will turn ON to indicate

proper operation. After the power LED turns on, you need to wait

1-2 minutes for the DFL-860 to boot up completely.

B. Connect an Ethernet cable from the DFL-860 to your Cable/

DSL modem. If the Cable/DSL modem is powered on, wait for

the WAN1 LED on the DFL-860 to light up to show a proper

connection. Otherwise, turn off your Cable/DSL modem, connect

the Ethernet cable from the DFL-860 to your Cable/DSL modem,

and turn on the Cable/DSL modem. Some Cable/DSL modems

may not have an on/off switch and will require you to unplug the

power adapter.

Note:

The default management IP address of the DFL-860 is

192.168.1.1. If you have are using a router that uses DHCP,

there may be a conict if the router uses the same IP address as

the DFL-860. If this is the case, either disconnect the DFL-860

from the router and change the management IP address of the

DFL-860, or change the DHCP settings on your router.

C. Insert an Ethernet cable to the LAN1 port on the front panel of

the DFL-860 and connect it to a port on your network hub or

switch. The LED light above the Ethernet port on the DFL-860

will illuminate to indicate proper connection

D. Connecting the computer that you will use to congure the

DFL-860 to the network hub or switch.

Connecting the DFL-860 3

4.1 Configure Your Computer’s IP Address

Make sure that the network adapter in your computer is congured

to use a static IP address with 192.168.1.1 as default gateway and

255.255.255.0 as netmask. Instructions on how to congure the

network adapter can be found in the appendix.

When you have completed the steps in this Quick Installation

Guide, your connected network should look similar to this:

Configure DFL-860 4

Cable/DSL Modem

DFL-860

Switch

Internal

Network

DMZ

Network

(optional)

Computer1 Computer2

4.2 Using the Setup Wizard

The DFL-860 provides Web based conguration. You can congure

your DFL-860 through Internet Explorer 6 and later or Firefox 1.0 and

later browser in MS Windows, Macintosh or UNIX based platforms.

Activate your browser, and ensure your built-in Pop-Up Blocker has

been disabled, so that the Pop-Up Blocker will not block the Startup

Wizard while you initiate the NetDefend Firewall for the rst time.

Additionally, in order to reduce the impact of Pop-Up Blocker, a user-

friendly mechanism has beem implemented in NetDefend Firewalls. A

"Startup Wizard" button is shown on the toolbar since rmware v2.20.

This button is available on the WebGUI while the appliance is initiated

with Conguration Version 1. Once you complete conguration and

save/activate the setting, the Startup Wizard button will be removed

automatically from the toolbar while you login WebGUI next time.

Now, let's start on WebGUI login, type the IP address of the DFL-860,

e.g. https://192.168.1.1, in the Location (for Netscape) or Address (for

IE) eld and press "Enter".

Log on to the DFL-860 web interface.

To start using the DFL-860 web interface you need to log on

using the default username and password.

DFL-860 Quick Installation Guide

Open your Web browser and

type https://192.168.1.1 /

into the URL address box.

Then press the Enter or

Return key.

Type the default

Username/Password

Username: admin

Pasword: admin

and click Login

Note:

DFL-860 allows either HTTP or a secure HTTPS connection

from any management host. However, for security reason, by

default only a secure HTTPS connection is allowed.

Step1 - Welcome to the DFL-860 setup wizard!

Step2 - Set up rewall administrator password

First Enter the

username that you want

to use for the admin

account.

Enter the password

that you want to use

for the admin account.

DFL-860 Quick Installation Guide

This wizard will guide

you through the setup of

your DFL-860

Click Next

Step 3 - Set up time and date

Click Set time and date

button for setting device

Click Next

Select the appropriate date

Enter the appropriate time

Click OK

DFL-860 Quick Installation Guide

Indice

Altri manuali D-Link Firewall

D-Link

D-Link DFL-210-IPS-12 Manuale utente

D-Link

D-Link NetDefend DFL-260E Manuale utente

D-Link

D-Link DFL-500 Manuale utente

D-Link

D-Link DFL-1000 Manuale utente

D-Link

D-Link DFL-200 - Security Appliance Manuale utente

D-Link

D-Link NetDefend Firewall Series Manuale utente

D-Link

D-Link DFL-200 - Security Appliance Manuale utente

D-Link

D-Link DFL-1100 - Security Appliance Manuale utente

D-Link

D-Link NetDefend DFL-CP310 Manuale utente

D-Link

D-Link NetDefend DFL-260E Manuale utente

D-Link

D-Link DFL-1600 - Security Appliance Manuale utente

D-Link

D-Link DFL-200 - Security Appliance Manuale utente

D-Link

D-Link DFL-600 Manuale utente

D-Link

D-Link NetDefend DFL-260E Manuale utente

D-Link

D-Link DFL-1100 - Security Appliance Manuale utente

D-Link

D-Link NetDefendOS Manuale utente

D-Link

D-Link NetDefend DFL-260E Manuale utente

D-Link

D-Link NetDefend DFL-800 Manuale utente

D-Link

D-Link DFL-1000 Manuale utente

D-Link

D-Link NetDefend DFL-260E Manuale utente

D-Link

D-Link DFL-300 - Security Appliance Manuale utente

D-Link

D-Link NetDefend DFL-1660 Manuale utente

D-Link

D-Link DFL-210 - NetDefend - Security Appliance Manuale utente

D-Link

D-Link DFL-210 - NetDefend - Security Appliance Manuale utente

Manuali Firewall popolari di altre marche

Cisco

Cisco S190 Manuale utente

Fortinet

Fortinet FortiGate Voice Series Manuale utente

ADTRAN

ADTRAN NetVanta 2300 Manuale utente

SecureLogix

SecureLogix ETM System Manuale utente

NETGEAR

NETGEAR ProSafe FVX538 Manuale utente

Lanner

Lanner FW-8877 Manuale utente

Huawei

Huawei USG6000 Series Manuale di installazione e funzionamento

H3C

H3C SecPath F5000-AI-15 Manuale utente

Nexcom

Nexcom DNA 1150 Manuale utente

Fortinet

Fortinet FortiGate-60 series Manuale utente

Cisco

Cisco 3110 Manuale

Draytek

Draytek Vigor2860 Series Manuale utente

Lanner electronics

Lanner electronics FW-7650 Series Manuale utente

Swisscom

Swisscom Internet Backup Manuale utente

SonicWALL

SonicWALL NSa 5700 Manuale utente

DPtech

DPtech FW1000 SERIES Manuale utente

FEITIAN

FEITIAN MultiPass FIDO Manuale utente

EBLOCKER

EBLOCKER PRO Manuale utente