D-Link DVG-2004S Manuale utente

Altri manuali per DVG-2004S

1

Altri manuali D-Link Portale

D-Link

D-Link DVG?6008G Manuale utente

D-Link

D-Link DG-104SH Manuale utente

D-Link

D-Link DVG-5112S Manuale utente

D-Link

D-Link DVG-2024S Manuale utente

D-Link

D-Link DVG-5008SG Manuale utente

D-Link

D-Link DIV-140 Manuale utente

D-Link

D-Link DSH-G300 Manuale utente

D-Link

D-Link DHM-401T Manuale utente

D-Link

D-Link DPN-144DG Manuale utente

D-Link

D-Link DG-102S Manuale utente

D-Link

D-Link DVG-3032S Manuale utente

D-Link

D-Link DSA-3600 Manuale utente

D-Link

D-Link DIV-140 Manuale utente

D-Link

D-Link DVG-6004S Manuale utente

D-Link

D-Link DVG-6004S Manuale utente

D-Link

D-Link DVG-3104MS - VoiceCenter PSTN Gateway Manuale utente

D-Link

D-Link DSA 5100 - Airspot - Gateway Manuale utente

D-Link

D-Link DSA-3110 Manuale utente

D-Link

D-Link DI-704 Manuale utente

D-Link

D-Link DVG-2032S Manuale utente

D-Link

D-Link DPG-2000W - AirPlus G Wireless Presentation... Manuale utente

D-Link

D-Link DG-102S Manuale utente

D-Link

D-Link DVG-4088S Manuale utente

D-Link

D-Link DG-104S Manuale utente

Manuali Portale popolari di altre marche

LST

LST M500RFE-AS Manuale utente

Kinnex

Kinnex Media Gateway Manuale utente

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuale utente

Telsey

Telsey CPVA 500 - SIP Manuale utente

RTA

RTA 460A-NNA4 Scheda tecnica

Shaw

Shaw Gateway HDPVR Manuale utente

ABB

ABB VSN900 Guida rapida

Commander

Commander Pulse Manuale utente

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuale utente

NETGEAR

NETGEAR C6300BD Manuale utente

Amit

Amit CDW531AM Manuale utente

HMS

HMS Netbiter EasyConnect EC150 Manuale utente

Huawei

Huawei EchoLife HG620 Manuale utente

AT&T

AT&T U-verse 3801 Manuale per l'uso e la cura

Logic IO

Logic IO RTCU MX2 turbo Manuale utente

Suttle

Suttle MediaMAX MXM-521 Manuale utente

C

Ch

he

ec

ck

k

Y

Yo

ou

ur

r

P

Pa

ac

ck

ka

ag

ge

e

C

Co

on

nt

te

en

nt

ts

s

These are the items included with your DVG-2004S VoIP Gateway purchase：

If any of the above items are missing, please contact your reseller.

©2005 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective

holders. Software and specifications subject to change without notice. DVG-2004S

This product can be set up using Remote

IP configuration tool and Web browser,

such as IE (Internet Explorer).

D

D

V

V

G

G-

-2

20

00

04

4S

S

G

Ga

at

te

ew

wa

ay

y

• DVG-2004S VoIP Gateway

• CD-ROM (containing Manual and

Installation program)

• Ethernet cable

• Phone cable

• Power cord Using a powe

r

supply with a

different voltage rating

will damage and void the

warranty for this product.

Connecting DVG-2004S to Your

Network

A. First, connect the power adapter to the receptor at the front panel of the DVG-2004S

and then plug the other end of the power adapter to a wall outlet or power strip. The

“ready” LED will turn ON to indicate proper operation.

B. 1. Connect an Ethernet cable to the Ethernet jack located on the Cable / DSL

modem.

2. Insert the other end of the Ethernet cable to the LAN PORT on the front panel of

DVG-2004S. The LAN LED light will illuminate to indicate proper connection. If the

LAN LED is not illuminated, please go back and step B and repeat its instructions.

C. Insert a phone cord to FXS port on the back panel of the DVG-2004S.

LED Light Display

The LED lights show the status of the DVG-2004S where list on the front panel.

No. Label Color Display Status

(1) FXS 1-4 Green On The phone line is active

On Power on

Flash System is rebooting

(2) Ready Green

Off Power off

On Network connected

(3) LAN- Left (100M) Amber Flash Packet is through this port

On Network connected

(4) LAN- Right (10M) Green Flash Packet is through this port

(1) (2) (3) (4)

WhenyouhaveconnectedallthelinetotheDVG-2004S,itwilllooksimilartothis:

VoIP Remote Configuration

DVG-2004S you purchased comes with an installation Insert the CD into your PC or

laptop and double click the file name “Setup VoIP-Remote-Config ”. VoIP-Remote

config software will be installed on your computer.

Setup with VoIP-Remoteconfig.exe

Once you finish installing, a new icon is created on your desktop.

Double click this icon.

Click on the empty field and enter the MAC address (printed on the back of

DVG-2004S). If you cannot find the MAC address, click “Search” to view all the

available MAC addresses in the LAN. You will see the following window.

Device list: List all the devices installed in the LAN.

This window contains 3 buttons -

 Refresh: Refresh the information on the Device List.

 Config: Configure the device.

 Exit: Exit VoIP Device Remote Config.

After you click the Config button, you will see the following window.

There are 3 ways to setup the IP address: DHCP, PPPoE, and Static IP. Select your

Network settings. These are the most common setup:

 For LAN, please choose Static IP

 For xDSL, please chose PPPoE

 For cable internet, please choose DHCP

 For other Network setup, please consult your Network Administrator.

Before you can save these settings, please enter the password on the Remote

Password field.

 Remote Password: Default password is “1234”. After you enter the correct

password, you may select “Default Setting”, “Reboot” or “Save”.

 Web Setting: Link user directly to the web setting interface.

 Default setting: Restore to factory default settings.

 Reboot: Restart the system.

 Save: Save any changes and restart the system.

 Status: Displays the device’s current status (Idle, Rebooting etc).

 Return: Return to the “Device List” window.

Login to the Browser

After choosing your Network environment, click “Web Setting”.

Click Web Setting

Type “admin” for

the username and

password.

Click OK

You will see the following screen.

Select General Setting from the Dialing Plan menu.

Click Submit

Select Dialing through SIP Server