D-Link DSA-3600 Manuale utente

DSA-3600

Quick Install Guide

Version 3.00 December, 2007

DSA-3600 Quick Install Guide 1

1.Introduction

1.1 Preface

DSA-3600 is a Multi-Service Business Gateway, specially designed for small and medium business, and

branch office operational environments. The major functional areas include user management, access

control, AP management, security management, and VLAN. This Quick Installation Guide provides

instructions and reference material for getting started with DSA-3600. The Guide will illustrate how to

install the DSA-3600 and configure its basic setting.

1.2 Package Contents

DSA-3600 x 1

Quick Install Guide x 1

CD-ROM x 1

Console Cable x 1

Straight-through Ethernet Cable x 1

Power Cord x 1

Power Adapter x 1

Note: It is recommended the original packing materials be kept in case of product service requirements.

Any returned product should be packed according to its original package content, together with its

relevant packing materials used for protecting the equipment from damage during delivery.

DSA-3600 Quick Install Guide 2

1.3 Hardware Introduction

The DSA-3600 is implemented on an embedded platform with mini-desktop form factor. On the front panel of

the product, there are eight LEDs that are used to indicate the system power, system status, and the link

status of the six Fast Ethernet ports. The interface ports are installed on the rear panel. Six Fast Ethernet

(100Mbps) ports are provided by DSA-3600. Two are configured as WAN Ports, and the other four are

configured as LAN Ports. Located on the rear panel are a serial console port, a reset button, and the power

socket.

Front Panel

1. Power 3. WAN1~WAN2 LEDs 5. Sign: Link

2. Status 4. LAN1~LAN4 LEDs 6. Sign: Act

1. Power

ON indicates the power is on, and OFF indicates the power is off.

2. Status

While system power is on, status OFF indicates BIOS is running, BLINKING indicates the OS is

running, and ON indicates system is ready.

3. WAN1~WAN2 LEDs

OFF indicates no connection, ON indicates connection, and BLINKING indicates transmitting

data.

4. LAN1~LAN4 LEDs

OFF indicates no connection, ON indicates connection, and BLINKING indicates transmitting

data.

5. Link: Indicates status of WAN1~WAN2 and LAN1~LAN4 connection.

6. Act: Indicates status of WAN1~WAN2 and LAN1~LAN4 data transmission.

1 2 3 4 5 6

DSA-3600 Quick Install Guide 3

Rear Panel

1. Power Socket: The power adapter attaches here.

2. Reset Button

Press and hold the Reset button for about 5 seconds and status of LED on front panel will start to

blink before restarting the DSA-3600.

Press and hold the Reset button for more than 10 seconds and status of LED on the front panel

will start to speed up blinking before resetting the DSA-3600 to default configuration.

3. WAN1~WAN2

The two WAN ports are for connection to external network not managed by the DSA-3600. These

ports may be used to connect to theATU-Router of an ADSL, or the port of a Cable Modem, or a

Switch or Hub on the LAN of an organization.

4. LAN1~LAN4

The four LAN ports are for connection to networks managed by DSA-3600, such as to clients’

networking devices or APs. There are two modes of service zone supported by DSA-3600:

Port-Based and Tag-Based. By default, all LAN ports are in Tag-based service zone. Under

Tag-Based mode, service zones are distinguished by VLAN tagging instead of physical LAN

ports.

5. Console: The serial RS-232 DB9 cable attaches here.

DSA-3600 Quick Install Guide 4

1.4 Hardware Installation

Please follow the steps mentioned below to setup the hardware of DSA-3600.

1. Connect the power adapter to the power socket on the rear panel. The Power LED on the front panel

should be ON to indicate a proper connection.

Warning: Using a non-certified power adapter may damage this product.

2. Connect an Ethernet cable to the WAN1 Port on the rear panel. Connect the other end of the Ethernet

cable to a networking device such as an ADSL modem, a cable modem, a switch, or a hub. The LED of

WAN1 port should light up to indicate a proper connection.

3. Connect an Ethernet cable to any LAN Port on the rear panel. Connect the other end of the cable to a

networking device such as the administrator’s PC. The LED of the LAN port should be ON to indicate a

proper connection.

DSA-3600 Quick Install Guide 5

1.5 Web Management Interface

The DSA-3600 provides a web management interface for configuration. After completing the hardware

installation, the administrator can configure the DSA-3600 via web browsers with JavaScript enabled, such

as Internet Explorer version 6.0 or above.

First, set a PC as DHCP in the network TCP/IP setting to get an IP address from DHCP server automatically.

Next, connect the PC to the DSA-3600 via any LAN port. An IP address will be assigned to the PC

automatically via DSA-3600 built-in DHCP server. Launch a web browser to access the web management

interface of DSA-3600 by entering “https://192.168.1.1” in the URL. (Note: https is used for secured

connection.)

Once the DSA-3600 has been connected, the Administrator Login Page will appear. Enter “admin” for both

the default username and password in the Username and Password fields, and then select the Enter button

to log in.

Note: When the DSA-3600 is new or has just been reset back to the factory default settings (with firmware

version 3.00.00 or later), the Setup Wizard (see next page) will automatically show up after reboot. You can

choose to follow the Wizard instructions or ignore this step.

After successfully logging into the DSA-3600 at the first time, the Setup Wizard will appear automatically.

After the second time logging in, the System Overview page of the web management interface will appear.

To logout, simply click the Logout icon on the upper right corner of the interface to return to the

Administrator Login Page.

DSA-3600 Quick Install Guide 6

2.QuickSetup

This chapter will provide a step-by-step guide to administrators on how to configure DSA-3600 via Setup

Wizard.

2.1 Quick Setup by Wizard

The administrator can configure the DSA-3600 via its web management interface as specified in section 1.5

of this document. In order to connect to the Internet, TCP/IP related information such as IP address, subnet

mask, and gateway address must first be obtained from the ISP.

The Setup Wizard page will appear after the fist logging into the system.After the second time logging,

select ToolsÆSetup Wizard in the left-top menu, and the Setup Wizard page will appear. Recommendation

for each step is provided at the left of the Setup Wizard page.

Step 1: General

Enter the administrator’s new password in the New Password field and retype it again in the Verify

Password field. To secure the system, administration account password change is recommended. Select

the proper time zone from the Time Zone drop-down menu to set the system time. Click Next to continue.

Note: The maximum length of the password is twenty-character and no space is allowed.

DSA-3600 Quick Install Guide

Step 2: WAN1 Interface

There are three connection types provided by DSA-3600, Static, Dynamic, and PPPoE. Contact your

ISP or the network administrator if you are not sure what the connection type for WAN1 is, then select

the Internet connection type for WAN1 interface. The following is an example of a PPPoE connection

type. To configure other connection types, please refer to the User Manual for more information. Enter

the Username and Password provided by the ISP. Click Next to continue or click Back to change

configurations in previous step.

Step 3: Local User Account (Optional)

In this step, new local accounts can be added into the local user database. Enter the Username (e.g.

testuser) and Password (e.g. testuser) of the desired new account to add a new local account into the

system. Click Skip to exit step 3 or click Next to validate added local accounts and continue.

DSA-3600 Quick Install Guide 8

Step 4: Confirm and Restart

Click Finish to save the current settings and restart the DSA-3600. A confirmation message will appear

after clicking Finish. Click OK to continue. The Setup Wizard is now completed.

During the DSA-3600 restarting, a “Confirm and Restart.” page will appear on the screen. Please do

not interrupt the DSA-3600 until the DSA-3600 Administrator Login Page reappears. This indicates that

the restart process has been completed.

DSA-3600 Quick Install Guide 9

Note: During every step of the wizard, if you wish to go back to modify the settings, please click the Back

button to go back to the previous step. Click Exit to leave the Wizard.

The DSA-3600 uses virtual LAN (VLAN) along with a SSID to separate service zones. At this stage, the

system is ready for use with minimum configuration. The factory default configuration uses tag-based

VLAN. The ‘Default’ service zone (with SSID=’dlink’) is enabled and requires no user authentication at

this initial stage.

Section 2.3 below show an example on how to configure two service zones that require user

authentication, one zone for internal staff, while the other zone for guests. At the end of section 2.3, the

Service Zones will have been configured to use tag-based VLAN in the deployment shown in Figure-2.

Section 2.4 demonstrates how to map two service zones using port-based VLAN.

Figure-1: An example using Tag-Based service zones

Altri manuali per DSA-3600

Indice

Altri manuali D-Link Portale

D-Link

D-Link Airspot DSA-3100 Manuale utente

D-Link

D-Link DVG-6004S Manuale utente

D-Link

D-Link DVG-2032S Manuale utente

D-Link

D-Link DPN-1021G Manuale utente

D-Link

D-Link Verizon DSL-2750B Manuale utente

D-Link

D-Link DVG-5008S Manuale utente

D-Link

D-Link DHM-401T Manuale utente

D-Link

D-Link DVG-5112S Manuale utente

D-Link

D-Link DVG-2024S Manuale utente

D-Link

D-Link DRO-210i Manuale utente

D-Link

D-Link Airspot DSA-3100 Manuale utente

D-Link

D-Link DPN-124G Manuale utente

D-Link

D-Link Airspot DSA-3100 Manuale utente

D-Link

D-Link DG-102SP Manuale utente

D-Link

D-Link DSA 5100 - Airspot - Gateway Manuale utente

D-Link

D-Link DSL-604+ Manuale utente

D-Link

D-Link DCH-G020 Manuale utente

D-Link

D-Link DSA-3600 Manuale utente

D-Link

D-Link DVG-6004S Manuale utente

D-Link

D-Link VoIP Wireless Router DVG-G5402SP Manuale utente

D-Link

D-Link DSH-G300 Manuale utente

D-Link

D-Link Airspot DSA-3100 Manuale utente

D-Link

D-Link DG-102S Manuale utente

D-Link

D-Link DVG-5004S Manuale utente

Manuali Portale popolari di altre marche

LST

LST M500RFE-AS Manuale utente

Kinnex

Kinnex Media Gateway Manuale utente

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuale utente

Telsey

Telsey CPVA 500 - SIP Manuale utente

RTA

RTA 460A-NNA4 Scheda tecnica

Shaw

Shaw Gateway HDPVR Manuale utente

ABB

ABB VSN900 Guida rapida

Commander

Commander Pulse Manuale utente

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuale utente

NETGEAR

NETGEAR C6300BD Manuale utente

Amit

Amit CDW531AM Manuale utente

HMS

HMS Netbiter EasyConnect EC150 Manuale utente

Huawei

Huawei EchoLife HG620 Manuale utente

AT&T

AT&T U-verse 3801 Manuale per l'uso e la cura

Logic IO

Logic IO RTCU MX2 turbo Manuale utente

Suttle

Suttle MediaMAX MXM-521 Manuale utente