D-Link DVG-5008SG Manuale utente
©2010 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of
their respective holders. Software and specifications subject to change without notice.
Quick Installation Guide
DVG-5008SG
DVG-5008SG
VoIP Gateway
CD-ROM
which includes
the User Manual
Phone Cord X8 Ethernet
(CAT5 UTP)
Cable
Power
Adaptor
Using a power
supply with a
different
voltage rating
will damage
this product
and void the
warranty
DVG-5008SG FXS VoIP Gateway
2
Power Power LED. A steady light indicates a proper connection
to a power source.
VoIP
The VoIP LED will turn on when the VoIP Gateway is
connected to a VoIP service provider. The LED will blink if
not connected to a service provider.
Alarm
A blinking light indicates the VoIP Gateway is attempting
to connect with the Provisioning server or DVG can’t get
IP from DHCP or PPPoE Server. Once the service
connects, the LED will turn off. The LED will light solid red
if the self-test or boot-up fails.
WAN
When a connection is established the LED will light up
solid. The LED will blink to indicate activity. If the LED
does not light up when a cable is connected, verify the
cable connections and make sure your devices are
powered on.
LAN
When a connection is established the LAN LED will light
up solid on the appropriate port. The LEDs will blink to
indicate activity. If the LED does not light up when a cable
is connected, verify the cable connections and make sure
your devices are powered on.
Phone
Green Blinking – FXS is alerting (ringing) for an inbound
call.
Green Solid – The line is in use.
Red Solid – As users execute “Status-> FXS Line
Diagnostic” and there is some error on the FXS port.
Hardware Overview
DVG-5008SG FXS VoIP Gateway
3
Rear Panel
1. WAN: Connect to your broadband modem using an Ethernet
cable.
2. LAN: Connect to your Ethernet enabled computers using
Ethernet cabling.
3. Phone Port (1-8): Connect to your phones using standard
phone cabling (RJ-11).
4. Ground: A conducting connection with the earth. Connect with
the ground so as to make the earth a part of an electrical
circuit using metal wire.
5. Power Receptor: Receptor for the provided power adapter.
6. Power Switch: Press it down to turn on DVG.
DVG-5008SG FXS VoIP Gateway
4
A. Insert one end of the Ethernet cable into the Ethernet (LAN) port on
the back panel of the DVG-5008SG and the other end of the cable to
an Ethernet Adapter or available Ethernet port on your computer.
B. Insert one end of the Ethernet cable into the WAN port on the back of
the DVG-5008SG and the other into your cable/DSL modem or the
LAN port of your router.
C. Insert a telephone cable into the Phone port, and then connect the
cable to your telephone.
Installing the Hardware
DVG-5008SG FXS VoIP Gateway
5
D. Connect the power adapter to the power input at the back panel of
the DVG-5008SG and then plug the other end of the power adapter
to a wall outlet or power strip. Then press down Power Switch. On
the front of the device, the Power LED will turn on to indicate proper
operation.
E. Check the LED display on the front of the VoIP Gateway to confirm
that the connections have been made.
Installing the Hardware (continued)
DVG-5008SG FXS VoIP Gateway
6
After the installations are completed, your network should look similar to
the diagram below.
Hardware configuration is complete! If your VoIP service is already activated, you
can make phone calls now.
DVG-5008SG FXS VoIP Gateway
7
Configuration
To access the web-based configuration utility, open a web browser such
as Internet Explorer and enter the IP address of the DVG-5008SG.
Click Next.
Open your Web browser and type
http://192.168.8.254 into the URL
address box. Press the Enter or
Return Key.
Click Lo
g
in to enter Web Site.
Click Setu
p
Wizard.
DVG-5008SG FXS VoIP Gateway
8
Configuration (continued)
It is highly recommended to create
a login ID and password to keep
your gateway secure.
Enter a NTP server or use the
default server.
Click Next.
Click Next.
DVG-5008SG FXS VoIP Gateway
9
Configuration (continued)
Select your Internet connection
type:
DHCP – Most Cable ISPs or if
you are connecting the DVG-
5008SG behind a router.
Static IP – Select if your ISP
supplied you with your IP
settings.
PPPoE – Most DSL ISPs.
PPTP – Select if required by
your ISP.
Select Manual to manually enter
IP address of DNS or select
Auto if DNS is assigned by ISP.
Click Next.
DVG-5008SG FXS VoIP Gateway
10
Configuration (continued)
Register to the SIP Proxy Server
by clicking Enable support of
SIP Proxy Server. Enter Proxy
Server IP/Domain and Port.
The Outbound Proxy Support
is optional. To register, please
click on the Outbound Proxy
Support check box and enter
Outbound Proxy IP/Domain
and Port in it.
Registration by phone line: enter
Number, User ID/Account and
Password supplied by your
ITSP. Click on the Register
check box to register to Proxy
Server.
Setup is finished. Check the
summary of your settings. To make
new settings effective, you must
click on the Restart button to reboot
the DVG-5008SG.
Click Restart.
Click Next.
Indice
Lingue:
Altri manuali D-Link Portale
D-Link
D-Link DBG-2000 Manuale utente
D-Link
D-Link DG-104S Manuale utente
D-Link
D-Link DG-102SH Manuale utente
D-Link
D-Link DVG-2032 Manuale utente
D-Link
D-Link DI-707 Manuale utente
D-Link
D-Link DPN-1021G Manuale utente
D-Link
D-Link Airspot DSA-3100 Manuale utente
D-Link
D-Link DPN-1021G Manuale utente
D-Link
D-Link DVG-2032S Manuale utente
D-Link
D-Link DG-104SH Manuale utente
D-Link
D-Link DCH-G020 Manuale utente
D-Link
D-Link DG-104S Manuale utente
D-Link
D-Link DVG-2016 Manuale utente
D-Link
D-Link DVA-G3810BN Manuale utente
D-Link
D-Link DVG-2032S Manuale utente
D-Link
D-Link DG-104SH Manuale utente
D-Link
D-Link DVG-7044S Manuale utente
D-Link
D-Link DVG-5112S Manuale utente
D-Link
D-Link DPG-2000W - AirPlus G Wireless Presentation... Manuale utente
D-Link
D-Link DVG-2032S Manuale utente
Manuali Portale popolari di altre marche
LST
LST M500RFE-AS Manuale utente
Kinnex
Kinnex Media Gateway Manuale utente
2N Telekomunikace
2N Telekomunikace 2N StarGate Manuale utente
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Manuale utente
Telsey
Telsey CPVA 500 - SIP Manuale utente
