D-Link DIR-2680 Manuale utente
DIR-2680 (D-Fend AC2600 Wi-Fi Router)
Ethernet Cable
Power Adapter
This is what has been included in your modem pack:
Please follow these instrucons to set up your
New Broadband connecon!
NZ Quick
Start Guide
Documentaon
Connect the black ethernet cable from
the Internet Port of your router to either
the LAN1 or GE1 Port of your ONT,
depending on the model.
Your ONT will be located on your wall.
(See below for details)
1. Connecng your Router to the Internet
Connect this port to your
router’s Internet Port
Connect this port to your
router’s Internet Port
Your Opcal Network Terminal (ONT)
The bre network connecon will be installed to an ONT which will be aached to
an inside wall of your house, normally in the main living area. These are the under
side views of the two most common types of ONT.
NOTE: Make sure the ONT is plugged into the power supply and is turned on.
2. Connect your Router to the Power
Connect the supplied power adapter to the router and a power outlet and press the
power buon. (Top, centre)
A solid blue light indicates a proper connecon to the power supply. The light will
be solid yellow during the power on process, undergoing factory reset process, or
under rmware upgrade process.
It may take a few minutes
before it will turn blue.
3. Connecng to the Internet and seng up Wi-Fi
Please ensure your power light is blue.
Using your smartphone and the D-Link App to setup your Router:
1. Watch the video showing all the steps at: www.bryte.nz/dlink
2. Search and install the free D-Link Wi-Fi app available on the App Store
or on Google Play.
3. Launch the D-Link Wi-Fi app from the home screen of your device.
4. Tap Install New Device in the middle of the screen.
5. Tap Yes to scan the setup QR code located on the Quick Install Card and proceed to
step 7. Alternavely, you can tap No to proceed to step 6.
6. Select Router and select DIR-2680 from the list of available devices. Tap Next to con-
nue.
You will now be presented an on-screen guide. PLEASE IGNORE the following screens tap-
ping Next on each screen unl you see the circular progress counter. NOTHING needs to
be unplugged or restarted. Watch our example video.
Here is a summary of the remaining steps:
a) Check the Wi-Fi LED light is solid blue and tap Next.
b) Connect to the Wi-Fi with the Username and Password shown in the App.
c) When prompted to select Internet Service Provider, select Other and tap Next.
d) Tap Yes to enter an Internet Username and Password. Use Educaon as both
the username and the password. Tap Next.
e) Set you own Wi-Fi network name and password or keep the one shown. Write it
down somewhere. Tap Next.
f) Set an Admin password for your device. You will need this if you want to change
device sengs through the web conguraon ulity. Tap Next.
g) Choose to keep your device up to date automacally. Tap Next.
h) Tap Save.
1. Congratulaons! You can now connect to your Wi-Fi network using the Wi-Fi name
and password. Tap Finish to end setup.
Using the Setup Wizard through the web conguraon ulity.
1. Connect your device to the router’s LAN port via your own network cable, or by
connecng your device to the router’s Wi-Fi.
When the network has connected, open your web
browser and enter hp://192.168.0.1 in the URL
eld as shown.
4. Know Your Router — Back Panel
Having problems with your set up?
Please see the broadband FAQ Help secon of our website - www.bryte.nz/support
2. If this is your rst me logging in, the setup wizard will automacally appear.
3. Agree to the Terms of Use and Privacy Policy then click Next and follow the on-screen
instrucons to congure your new D-Link router and connect to the Internet.
4. From the Internet Service Provider list, choose Others. Click Next. (If you are
presented with ‘Congure Your Internet Connecon’ please check your cabling and
that your Fibre ONT is powered on. Once corrected, click Back unl you are at the
start of the Wizard and try again).
5. Enter an Internet Username and Password. Use Educaon as both the username and
the password. Click Next.
6. Type in a Wi-Fi Network Name and Wi-Fi Password to setup your Wi-Fi network. Your
wireless clients will need to have this password to be able to connect to your Wi-Fi
network. Click Next to connue.
7. In order to secure the router’s conguraon access, please enter a new Admin
Password. You will be prompted for this password every me you want to use the
router’s web conguraon ulity. Click Next to connue.
8. Conrm your me zone is Pacic/Auckland. Click Next to connue.
9. Choose to ‘Keep my device up to date automacally’. Click Next and Next again to
nalize the sengs or Back to make any changes.
10. Please wait while the device sengs are saved. Do not turn o or unplug your router
during this me.
Your setup is complete. You can now connect to your Wi-Fi using the password.
Altri manuali per DIR-2680
1
Indice
Altri manuali D-Link Router di rete
D-Link
D-Link DIR-615 - Wireless N Router Manuale utente
D-Link
D-Link DES-1005D Manuale utente
D-Link
D-Link DES-1008P Manuale utente
D-Link
D-Link DSL-245GE Manuale utente
D-Link
D-Link DSL-3785 Manuale utente
D-Link
D-Link DIR-300 - Wireless G Router Manuale utente
D-Link
D-Link DIR-868L Manuale utente
D-Link
D-Link SharePort DIR-825 Manuale utente
D-Link
D-Link DWR-555 Manuale utente
D-Link
D-Link DSR-250V2 Manuale utente
D-Link
D-Link DSL-2750E Manuale
D-Link
D-Link DES-1316 - Switch Manuale utente
D-Link
D-Link DSL-G604T Manuale utente
D-Link
D-Link DIR-X1530 Manuale utente
D-Link
D-Link DES-6300 Manuale utente
D-Link
D-Link DSS-24+ Manuale utente
D-Link
D-Link DSL-500T Manuale utente
D-Link
D-Link AirPlus DWL-810+ Manuale utente
D-Link
D-Link DES-3026 Manuale utente
D-Link
D-Link DI-2000 Series Manuale utente
Manuali Router di rete popolari di altre marche
NETGEAR
NETGEAR FS526T - Switch Manuale utente
Korenix
Korenix JetNet 5710G Series Manuale utente
Automated Logic
Automated Logic ZN551 Manuale del proprietario
Cisco
Cisco ASR 1000 Series Manuale dell'operatore
EnGenius
EnGenius ESR-9710 Manuale utente
Cisco
Cisco 805 Series Istruzioni operative e di sicurezza