D-Link DSL-200 Manuale utente

Altri manuali per DSL-200

5

Indice

Altri manuali D-Link Router di rete

D-Link

D-Link COVR-2203 Manuale utente

D-Link

D-Link DIR-875 Manuale utente

D-Link

D-Link DSR-500 Manuale utente

D-Link

D-Link DSL-2542B Manuale utente

D-Link

D-Link AC750 Manuale utente

D-Link

D-Link DXN-W224 Manuale utente

D-Link

D-Link DIR-842 Manuale utente

D-Link

D-Link DMS-1100-10TS Manuale utente

D-Link

D-Link DIR-865L Manuale utente

D-Link

D-Link DSL-564T Manuale utente

D-Link

D-Link DES-3204 Manuale utente

D-Link

D-Link GO-RT-AC750 Manuale utente

D-Link

D-Link TM DES-6500 Manuale utente

D-Link

D-Link DIS-2650AP Manuale utente

D-Link

D-Link DWR-910 Manuale utente

D-Link

D-Link DSL-4320L Manuale utente

D-Link

D-Link DIR-457U Manuale utente

D-Link

D-Link DWR-961 Manuale utente

D-Link

D-Link DSL-2650U Manuale utente

D-Link

D-Link DES-1008D Manuale utente

D-Link

D-Link DIR-882 Manuale utente

D-Link

D-Link DWR-710 Manuale

D-Link

D-Link DSL-3782 Manuale utente

D-Link

D-Link DIR- 878 Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza

1

Contents

1. Uninstall previous driver

2. Install new driver

3. Authentication/log in procedure

1. Uninstall Previous Driver

Note: Do not unplug the DSL 200 until prompted

a. Click on the Start button located in the bottom left corner. Select All

Programs then Dlink DSL200 ADSL Modem. Now click on Uninstall

Dlink DSL 200 RevA

Configuring in Layer2 PPPoE

for Windows XP and 2000

Please ensure you have the installation CD that came with your modem. You

will need this when reinstalling the drivers.

If you have misplaced this CD please download the driver from

http://www.dlink.com.au/tech/ before you begin

2

b. Click Yes to “Are you sure you want to remove the software?”

c. Click OK to “Please don’t unplug the USB cable until after the setup wizard

has finished”

d. Now unplug the DSL200 from your computer. Click OK to “Please unplug

the modem from the computer now”.

e. Click Yes, reboot the computer now then click Finish to restart your computer.

2. Install New Driver

3

a. Insert the DSL-200 CD into your PC’s CD-ROM drive.

b. Click on Install Driver to begin the driver installation. If the below screen

doesn’t automatically appear, then from your desktop click on the Start

button located in the bottom left corner, select Run, then type

d:\driver\setup.exe – where d: is the letter of your CD-ROM drive. Then click

on Install Driver.

c. Click Next on the Welcome to D-LINK DSL-200 Modem Setup window.

d. Select Other Service Provider form the list the click on Next

4

e. Select WAN driver then click on Next

5

f. Leave VPI: 8and VCI: 35

Select Encapsulation: RFC 2516 PPPoE LLC Encapsulation

Modulation: Multimode (for ADSL2+ customers) or G.dmt (for ADSL

customers)

Click on Next

g. You will see a confirmation screen with your settings. Click Next

6

h. Depending on you computers settings you may encounter the Software

Installation window. If you do click Continue Anyway, otherwise go to the

next step

i. Click the Finish button on the Setup Complete window.

j. You will see the following DSL Installer window. Plug your modem into a

free USB Port now.

k. Please wait while the software loads

7

l. Click Yes to restart your computer

3. Authentication/log in Procedure

Please ensure that you have restarted your PC before proceeding with the

login procedures.

a. On your desktop, a new icon will appear called D-link PPPoE Au

Connection. Double click this icon to open the Connect DLink PPPoE AU

Connection window.

b. Fill in the User name and Password fields

•User name:

-<TPGusername>@L2TP.tpg.com.au for Fixed IP plans

OR

-<TPGusername>@PPP.tpg.com.au for Dynamic IP plans

(e.g. [email protected])

•Your Password by default is the same as your <TPGusername>

however if you have changed your password since registration

time, please use your current TPG password

•Tick Save this user name and password for the following

users: Me only

c. Click on Dial to connect your ADSL connection

8

d. Your network configuration has now been completed and you can start to

use TPG’s service. After the login procedure, you will be assigned an IP

address and DNS settings from TPG

e. To browse web sites, please now launch your browser

Please note: Before you can use the Internet, you must ensure you

authenticate every time your computer is switched on

Support Information

For further assistance regarding configuration,

please call TPG Technical Support on 1300 360 855

Technical Support Opening Hours

Monday to Friday 8am – midnight

Saturday and Sunday 9am – 9pm

Public Holidays 9am – 6pm