D-Link DSL-G225 Manuale utente

Altri manuali per DSL-G225

3

Indice

Altri manuali D-Link Router di rete

D-Link

D-Link DGS-1016D - Switch Manuale utente

D-Link

D-Link DSL-500 Manuale utente

D-Link

D-Link DWM-312 Manuale utente

D-Link

D-Link DWL-3150 Manuale utente

D-Link

D-Link DSL-1500G v.A1 Manuale utente

D-Link

D-Link DFL-600 Manuale utente

D-Link

D-Link DSL-G604T Manuale utente

D-Link

D-Link DI-304 Manuale di servizio

D-Link

D-Link DGS-3224SR Manuale utente

D-Link

D-Link DIR-868L Manuale utente

D-Link

D-Link DSL-504G Manuale utente

D-Link

D-Link DSL-2890L Manuale utente

D-Link

D-Link DSL-502T Manuale utente

D-Link

D-Link GO-SW-5E Manuale utente

D-Link

D-Link DES-3010F Manuale utente

D-Link

D-Link DWR-980 Manuale utente

D-Link

D-Link DVG-5402G Manuale utente

D-Link

D-Link DIR-868L Manuale utente

D-Link

D-Link DSR-500 Manuale utente

D-Link

D-Link DSL-2640B Manuale utente

D-Link

D-Link DSL-2540B - ADSL2/2+ Modem With EN Router Manuale utente

D-Link

D-Link DIR-826L Manuale utente

D-Link

D-Link DSL-3900 Manuale utente

D-Link

D-Link DWM-312 Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza

How to setup the DSL-G225

in Bridge Mode

D-Link Technical Support –How to setup DSL-G225 in Bridge Mode Page 2of 11

This guide is for DSL-G225 with firmware ver. 1.04.

Before proceeding with this setup please set your computer temporarily with a static IP address from

192.168.1.x range (e.g. 192.168.1.99):

Open your Internet browser e.g. Internet Explorer, Firefox, Chrome, Safari, etc. and enter the IP address of your D-

Link modem in the address bar: http://192.168.1.1.

When prompted, type in the Password. If you have not changed the password for the modem administration, the

factory password is “admin”.

D-Link Technical Support –How to setup DSL-G225 in Bridge Mode Page 3of 11

There are two ways to setup your modem in Bridge Mode: using the Setup Wizard and using Manual

Configuration.

Setup using the Setup Wizard

Step 1. After logging into the modem’s configuration pages, go to SETUP > Local Network.

Un-check the “Enable DHCP Server”option.

Click on Save/Apply.

D-Link Technical Support –How to setup DSL-G225 in Bridge Mode Page 4of 11

Step 2. Go to SETUP > Wizard > click on the “Setup Wizard” button.

Follow the steps in the Setup Wizard.

D-Link Technical Support –How to setup DSL-G225 in Bridge Mode Page 5of 11

Choose ADSL or VDSL, depending on the type of technology used for your Internet connection.

Set Protocol to “Bridge”.

It is recommended to disable the modem’s Wi-Fi:

D-Link Technical Support –How to setup DSL-G225 in Bridge Mode Page 6of 11

Click on “Save/Apply” to finish the Setup Wizard. The setup is complete.

D-Link Technical Support –How to setup DSL-G225 in Bridge Mode Page 7of 11

Manual Setup

Step 1. After logging into the modem’s configuration pages, go to SETUP > Local Network.

Un-check the “Enable DHCP Server”option.

Click on Save/Apply.

D-Link Technical Support –How to setup DSL-G225 in Bridge Mode Page 8of 11

Step 2. Go to SETUP > Internet Setup.

If there are any existing profiles listed in the WAN Setup table, delete them.

Choose ADSL or VDSL, depending on the type of technology used for your Internet connection.

Click on “Add”.

Set Protocol to “Bridging” and click on Next.

D-Link Technical Support –How to setup DSL-G225 in Bridge Mode Page 9of 11

Click on “Apply” to finish the setup. The modem setup is complete.

D-Link Technical Support –How to setup DSL-G225 in Bridge Mode Page 10 of 11

Please note that in Bridge Mode the DSL-G225 modem acts as a transparent device. If your Internet

provider requires PPPoE authentication or VLAN tagging, you need to enable these options on the device

connected to the LAN port of the DSL-G225 modem.

After successful VDSL sync