D-Link DSL-G604T Manuale utente
Before You Begin
Make sure you have all the necessary information and equipment on hand before beginning
the installation.
DSL-G604T
WirelessADSLRouter
This product can be set up using
any current web browser, i.e.,
Internet Explorer 6, Netscape
Navigator 6.2.3, Mozilla or Firefox.
Check Your Package Contents
©2005 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders.
Software and specifications subject to change without notice.
DSL-G604T ADSL Router
CD-ROM (containing User Manual)
Ethernet (CAT5 UTP) Cable
Telephone Cable
Power Adapter
Using a power supply
with a different voltage
rating will damage and void
the warranty for this product.
If any of the above items is missing,
please contact your reseller.
1
Connecting the Router to Your Computer
A. First, connect the power adapter to the power input at the back panel of the DSL-
G604T and then plug the other end of the power adapter to a wall outlet or power strip.
On the front of the device, the Power LED will turn ON to indicate proper operation.
B. Insert one end of the Ethernet cable into an Ethernet (LAN) port on the back panel of
the DSL-G604T and the other end of the cable to an Ethernet Adapter or available
Ethernet port on your computer.
C. Insert the telephone cable included with the Router into the ADSL port, then connect
the cable to your telephone line.
D. Check the LED display on the front of the Router to confirm that the connections have
been made.
Rear Panel Connections
All cable connections to the Router are made at the rear panel. Connect the power adapter
here to power on the Router. Use the Reset button to restore the settings to the factory
default values in the next chapter for instructions on using the reset button).
Antenna
For wireless operation,
mount the antenna on the
threaded antenna post.
Ethernet ports
2
Use the Ethernet ports to
connect the Router to
your Ethernet LAN or
Ethernet devices.
Power Insert
Use the adapter shipped
with the Router to connect
to power source.
ADSL Port
Use the ADSL cable to
connect to the your
port).
telephone line (RJ-11
Reset button
To manually reset,
depress button with the
power on for a few
d
Connecting the Router to Your Computer
(continued)
Front Panel LEDs
The LED indicators on the front panel include the Power, Status, ADSL, WLAN, and
Ethernet indicators. The ADSL and Ethernet indicators monitor link status and activity
(Link/Act).
3
Power
Steady green light indicates
the unit is powered on. When
the device is powered off this
remains dark.
Status
Lights steady green during
power on self-test (POST).
Once the connection status
has been settled, the light will
blink green. If the indicator
lights steady green after the
POST, the system has failed
and the device should be
rebooted.
ADSL (Link/Act)
Steady green light indicates a
valid ADSL connection. This
will light after the ADSL
negotiation process has been
settled. A blinking green light
indicates activity on the WAN
(ADSL) interface.
WLAN (Link/Act)
Steady green light indicates a
wireless connection. A
blinking green light indicates
activity on the WLAN
interface.
Ethernet (Link/Act)
1 - 4
A solid green light indicates a
valid link on startup. This light
will blink when there is
activity currently passing
through the Ethernet ports.
Connecting the Router to Your Computer
(continued)
Your setup should resemble the one shown below.
The illustration below shows the DSL-G604T connected to Ethernet LAN devices, Wireless
LAN devices and the Internet.
4
Configuring the Router
To use your Web browser to access the web pages used to setup the Router, your computer
must be configured to “Obtain an IP address automatically”, that is, you must change the
IP network settings of your computer so that it is a DHCP Client. If you are using Windows
XP and do not know how to change your network settings, skip ahead to Appendix and read
the instructions provided. You may also read the User Manual for instructions on changing IP
settings for computers running Windows operating systems.
5
Open your Web browser and type
Then press the Enter or Return key.
The Login page appears.
“http://10.1.1.1” into the URL address box.
“admin” for
“admin”
Type the
User Name and
in the Password field.
OKClick
6
Configuring the Router (continued)
Once you have logged in, the Home directory tab is prominent with the Setup Wizard menu
displayed. Most users will be able to use the Setup Wizard to establish the ADSL connection
to your ISP. To begin using the Setup Wizard, click on the Run Wizard button in the middle
of the web page. A pop-up menu will appear. This pop-up menu is the Setup Wizard. The
Setup Wizard procedure consists of four general steps:
1. Set the system password
2. Set the time zone
3. Set the Internet connection
4. Restart the Router
When you setup the Internet connection, you will need to enter information provided by your
ISP. The type of information you need depends on the type of connection you are setting up.
Click on the Run Wizard button.
Configuring the Router (continued)
The first window of the Setup Wizard menu lists a summary of the steps required to complete
the setup. Click the Next button to begin setup and go on to step 1.
Click the Next button.
7
Configuring the Router (continued)
Choosing the Time Zone
Now configure the Time Zone used for the Router’s system clock. Select the appropriate
time zone and Daylight Saving Time setting for your location.
Select the Time Zone you are located
in by using the pull-down menu.
Click the Next button.
8
Configuring the Router (continued)
Selecting the Connection Type
Next, you will Set the Internet Connection Type for the WAN interface. Your ISP has given
this information to you. If you do not know what type of connection to use, exit the Setup
Wizard and contact your ISP for the information. The Setup wizard menu that appears when
you click the Next button depends on what connection type you select.
Select the Connection Type
used for your ADSL service.
Click the Next button.
9
Configuring the Router (continued)
PPPoE/PPPoA Connections
If you selected the PPPoE/PPPoA connection type in the previous menu, you will see the
Setup Wizard menu pictured here. Type in the Username and Password used to identify
and verify your account to the ISP. The VPI number and VCI number should not be changed
unless you have been instructed to change them. Select the Connection Type used for
encapsulation specific to your service. Click Next when you are ready to continue to the
Setup Completed menu.
If you are not sure what Connection Type,VPI and VCI to use, please check with your ISP.
Type the If you have been
told by your ISP to
change the Type
the new values.
Username
Password
and
for your ISP
account.
10
VPI or
VCI number,
Click the ad to
the Setup Completed menu below.
Next button. Skip ahe
Use the pull-down menu to choose
the correct The
user may choose between
or
as instructed by your ISP.
Connection Type.
PPPoA
VC-Mux, PPPoE LLC PPPoA
LLC,
Altri manuali per DSL-G604T
17
Indice
Altri manuali D-Link Router di rete
D-Link
D-Link DIR-890L Manuale utente
D-Link
D-Link DFL-300 - Security Appliance Manuale utente
D-Link
D-Link DSL-2600U Manuale utente
D-Link
D-Link GO-SW-5E Manuale utente
D-Link
D-Link DSL-2751 Manuale utente
D-Link
D-Link DES-5024 - Switch Manuale utente
D-Link
D-Link DIR-826L Manuale utente
D-Link
D-Link DSL-2741B Manuale utente
D-Link
D-Link xStack Manuale utente
D-Link
D-Link DES-3550 Manuale utente
D-Link
D-Link DES-1005D Manuale utente
D-Link
D-Link AirPremier DWL-1800 Manuale utente
D-Link
D-Link DSL-504 Manuale utente
D-Link
D-Link DIR-825/GF Manuale utente
D-Link
D-Link DWR-953 Manuale utente
D-Link
D-Link AC1200 Manuale utente
D-Link
D-Link DI-804 Manuale utente
D-Link
D-Link DES-1008FX Manuale utente
D-Link
D-Link DSL-2540B - ADSL2/2+ Modem With EN Router Manuale utente
D-Link
D-Link DSR-500 Manuale utente
Manuali Router di rete popolari di altre marche
NETGEAR
NETGEAR FS526T - Switch Manuale utente
Korenix
Korenix JetNet 5710G Series Manuale utente
Automated Logic
Automated Logic ZN551 Manuale del proprietario
Cisco
Cisco ASR 1000 Series Manuale dell'operatore
EnGenius
EnGenius ESR-9710 Manuale utente
Cisco
Cisco 805 Series Istruzioni operative e di sicurezza