D-Link DSR-500 Manuale utente

This document will guide you through the

basic installation process for your new

D-Link Services Router.

Building Networks for People

DSR-500 / DSR-1000

Documentation also available

on CD and via the D-Link

Website

Quick Installation Guide

Unied Services Router

Quick Installation Guide

Installationsanleitung

Guide d’installation

Guía de instalación

Guida di Installazione

Руководство по быстрой установке

Guía de Instalación Rápida

Guia de Instalação Rápida

快速安裝指南

Petunjuk Pemasangan Cepat

クイックインストールガイド

D-Link Services Router 1

ENGLISH

About This Guide

This guide gives step by step instructions for

setting up D-Link DSR-500/1000 Services Router.

Please note that the model you have purchased

may appear slightly different from those shown in

the illustrations.

Unpacking the Product

Open the shipping carton and carefully unpack its

contents. Please consult the packing list located

in following information to make sure all items are

present and undamaged. If any item is missing

or damaged, please contact your local D-Link

reseller for replacement.

- One (1) DSR-500/1000 Services Router

Appliance.

- One (1) Power adapter

- One (1) Console Cable (RJ45-to-DB9 Cable)

- One (1) Ethernet (CAT5 UTP/Straight Through)

Cable

- One (1) Reference CD (CD-ROM containing

product documentation in PDF format)

- Two (2) Rack Mounting Brackets

Item Feature Description

A LED Power LED: Indicates the Services

Router is powered on.

B USB Port It can support various USB 1.1 or

2.0 devices below:

1. Flash Disk or Hard Disk for

network sharing.

2. 3G Adaptor for WAN redundant

3. Printer

C Gigabit LAN port

(1-4) Connect Ethernet devices, such as

computers, switches and hubs.

D Gigabit WAN port

(1-2) Two auto MDI/MDIX WAN ports

are the connection for the Ethernet

cable to the cable or DSL modem.

The WAN2 port is a congurable

port which can support WAN2 or

DMZ port for dual WAN connec-

tions or internal Server Farm

purpose.

E Console Port Used to access Command Line

Interface (CLI) via RJ45-to-DB9

console Cable.

Table 1. DSR-500/1000 Front Panel Descriptions

Device Status LEDs and Ethernet Port LEDs

The device LEDs show information about current

device status. When the device power up, the

POWER/STATUS LED will show solid orange

during power on process. Startup takes one minute

approximately to complete, the LED will change

to solid green. If you want to turn the device off

and on again, we recommend you wait a few

seconds between shutting it down and powering it

back. The Ethernet LEDs show the status of each

Ethernet port. Table 2 lists the name, color, status

and description of each device LED.

Figure 2. Ethernet RJ-45 Port LEDs

TX/RX

Status

Link

Speed

Front Panel - DSR-500/1000

Product Overview

Note: DSR-500 supports one USB port only.

Figure 1. DSR-500/1000 Front Panel

EA C DB

2 D-Link Services Router

ENGLISH

LED

Indicators

Color Status Description

Power /

Status

Orange/

Green

Solid

Orange

Device during power-on

process

Solid Green Completion of power on

Blinking

Orange

Device is crashed and

under recovery mode

Blinking

Green

The system is defective,

such rmware upgrades

fail.

Light Off The device is power-off

USB Green Solid Green The link is good

Blinking

Green

There is activity on

this port

Light Off No link

TX/RX

Status

Green Light Off No Link.

Solid Green Link present.

Blinking

Green

Port is sending or

receiving data.

LINK

Speed

Green/

Orange

Light Off Port is operating at

10Mbps.

Solid Green Port is operating at

100Mbps

Solid

Orange

Port is operating at

1000Mbps

Installing Equipment

Table 2. Device Status LED Descriptions

Installing and Connection

This chapter describes how to install a

DSR-500/1000 device in a standard 19-inch

equipment rack and how to connect cables and

power to the device.

Before You Begin

Observe the following precautions to help prevent

shutdowns, equipment failures and injuries:

- Before installation, always check that the power

supply is disconnected.

- Ensure that the room in which you operate the

device has adequate air circulation and that

the room temperature does Not exceed 40oC

(104oC)

- Allow 1 meter (3 feet) of clear space to the front

and back of the device.

- Do not place the device in an equipment rack

frame that blocks the air vents on the sides of

the chassis. Ensure that enclosed racks have

fans and louvered sides

- Correct these hazardous conditions before

any installation: moist or wet oors, leaks,

ungrounded or frayed power cables, or missing

safety grounds.

You can mount the DSR-500/1000 device into a

standard 19-inch equipment rack. To install an

appliance into a rack:

1. Attach the mounting brackets to each side of

the chassis as shown in gure 3 and secure

them with the screws provided.

DSR-500/1000 Default Interface Settings

Ethernet

Interface Interface Type IP Address

Web-Based

Management

LAN(1-4) /

WLAN

Static IP 192.168.10.1/24 Enabled

WAN1 DHCP Client 0.0.0.0/0 Disabled

WAN2

(Congurable

port)

DHCP Client

(default)

0.0.0.0/0 Disabled

Static IP (When

it’s congured

as DMZ)

172.17.100.254/24 Disabled

Table 3. Default Interface Settings

Note: D-Link Services Router only allow Web GUI

access from LAN and WLAN interfaces by default

for security reason.

The WAN2 is a congurable port which support

various and advanced scenario applications.

When WAN2 port is congured as DMZ port, the

IP address will be changed to 172.17.100.254.

Figure 3. Attaching Rack Mount Brackets

D-Link Services Router 3

ENGLISH

LAN Console

Internet

Switch

User

Connecting the Device to a Network

Figure 5. Basic Cabling Example

Initial Conguration

The Services Router software is preinstalled on

the DSR-500/1000 device. When the device is

powered on, it is ready to be congured. While

the device has a default factory conguration

that allow you to initially connect to the device,

you must perform further conguration for your

specic network requirements.

Using the WebUI

To use the WebUI, the workstation from which you

are managing the device must initially be on the

same subnetwork as the device.

Connecting Power and Turning On/Off

The AC Power adapter shipped with the device

connects the device to earth ground when plugged

an AC grounding-type power outlet. The device

must be connected to earth ground during normal

operation.

To connect power to the device, plug one end of

the AC power core into the AC power appliance

inlet on the back panel of the device. Plug the other

end into an AC power source.

Note: We recommend using a surge protector for

the power connection.

To power on the DSR-500/1000 device, press

the AC power switch on the rear panel to the on

position. To power off the device, press the power

switch to the off position.

2. Then, use the screws provided with the

equipment rack to mount the device in the rack.

Figure 4. Installing the Services Router

in a standard-sized equipment rack

This section provides basic information about

physically connecting the DSR-500 /1000 to a

network. To connect the necessary cables as

shown in Figure 5.

1. Connect an RJ-45 cable from the port labeled

WAN1 to the external router. The port WAN1 is

pre-allocated to the WAN1 network segment.

2. Connect an RJ-45 cable from the port labeled

LAN (1-4) to a switch in the LAN network

segment.

3. Connect an RJ45-to-DB9 cable from the

console port for CLI (Command Line Interface)

management access.

4 D-Link Services Router

ENGLISH

To access the device with the WebUI:

1. Connect your workstation on the port labeled

LAN (1-4), which is pre-allocated to the LAN.

2. Ensure your workstation is congured with a

static IP address in the 192.168.10.0/24

subnet.

Note: Disable pop-up blocking software or

add the management IP address

Https://192.168.10.1 to your pop-up blocker’s

allow list.

3. Launch your browser; enter the IP address for

the LAN interface. (The factory default IP

address is Https://192.168.10.1), then press

Enter.

4. Log on the Services Router Web Interface The

default log on information is:

Username: admin

Password: admin

The Services Router provides an serial port that

enables a connection to a computer or terminal

for monitoring and conguring the device. This

port is a RJ-45 connector, implemented as a

data communication terminal equipment (DCE)

connection.

To use the console port connection, you need the

following equipment:

1. A terminal or a computer with both a serial port

and the ability to emulate a terminal.

2. A RJ45-to-DB9 RS-232 with female connector.

(Already included in packing list)

3. If your Laptop or PC doesn’t have RS-232

connector, a converter is required.

Note: DSR-500/1000 does not come with

RS-232 converter and these must be purchased

separately.

To establish a console connection:

1. Plug the RJ-45 connector of the supplied

RJ45-to-DB9 cable directly to the console port

on the Services Router.

2. Connect the other end of the cable to a

terminal or to the serial connector of a

computer running terminal emulation software.

Set the terminal emulation software as

following:

Baud rate: 115200

Data bits: 8

Parity: None

Stop bits: 1

Flow control: None

3. When you have correctly set up the terminal,

having previously followed the instructions in

section 2.3, “Connecting Power and Turn the

Device On/Off” then switch on your device.

The boot sequence appears in the terminal.

4. Once the boot sequence completes, the

command prompt is displayed, the device is

ready to be congured.

Figure 7. Authentication Message

Figure 6. Browser Address

Table 4. Browser Compatibility

Using a Console Connection

(RJ45-to-DB9 DCE)

Browser Version

Microsoft Internet

Explorer

6.0 or higher

Mozilla Firefox 3.5 or higher

Netscape Navigator 9.0 or higher

Apple Safari 4.0 and later

Google Chrome 3.0 and later

D-Link Services Router 5

ENGLISH

Additional help is available through D-Link

worldwide ofces listed at the appendix of the User

Manual or online. To know more about D-Link

security product products or marketing information,

please visit the website http://mydsr.dlink.com.

tw; for any support issue, please visit the website

http://support.dlink.com.tw, which will redirect

you to appropriate local D-Link website.

Additional Information

Technical Support

After initial setup, you should refer to the

companion publications found in PDF format

on the accompanying master CD for more

information on how to begin to congure the

DSR-500/1000 device.

DSR Series Router User Manual

This document describes the general operation

and control of the Services Router rmware which

drives and controls the Services Router series

hardware. It includes examples of how to carry

out typical administrative tasks such as setting up

a VPN and how to use Services Router series in

various scenarios.

D-Link Services Router CLI Reference Guide

This document describes all available text-based

commands that can be used on RJ45-to-DB9

Console or SSH interface to congure Services

Router during system operation.

Finalizing the Conguration

dlink.com/support

Diese Anleitung führt Sie durch den

allgemeinen Installationsprozess für Ihren

neuen D-Link Services Router.

DSR-500 / DSR-1000

Die Dokumentation ist auch auf

CD und über die D-Link-Website

verfügbar

Installationsanleitung

Unied Services Router

Building Networks for People

D-Link Services Router 7

DEUTSCH

Informationen zum Handbuch

Diese Anleitung weist Sie Schritt für Schritt an,

wie Sie D-Link DSR-500/1000 Services Router

einrichten können. Beachten Sie, dass Ihr Modell

sich möglicherweise geringfügig von den Abbil-

dungen unterscheidet.

Lieferumfang und Auspacken

des Produkts

Öffnen Sie den Versandkarton, entnehmen Sie den

Inhalt und packen Sie ihn vorsichtig aus. Stellen

Sie bitte sicher, dass alle auf der Packliste aufge-

führten Artikel auch tatsächlich geliefert wurden

und unbeschädigt sind. Sollte ein Artikel fehlen

oder beschädigt sein, wenden Sie sich zum Zwecke

einer Ersatzlieferung umgehend an Ihren D-Link-

Fachhändler.

- Ein (1) DSR-500/1000 Services Router.

- Ein (1) Netzteil

- Ein (1) Konsolenkabel (RJ45-to-DB9-Kabel)

- Ein (1) Ethernet-Kabel (CAT5 UTP/Straight-

Through)

- Eine (1) Referenz-CD (CD-ROM mit der

Produktdokumentation im PDF-Format)

- Zwei (2) Rackbefestigungsklammern

Element Merkmal Beschreibung

A LED LED-Betriebsanzeige: Zeigt an, dass

der Services Router eingeschaltet ist.

B USB-Port Kann verschiedene USB 1.1 oder 2.0

Geräte (unten) unterstützen:

1. Flash-Speicher oder Festplatte für

gemeinsamen Netzwerkzugang.

2. 3G-Adaptor für redundantes WAN

3. Drucker

D Gigabit-LAN-Port

(1-4) Zum Anschluss von Ethernet-Geräten

wie Computer, Switches und Hubs.

E Gigabit-WAN-Port

(1-2) Zwei Auto-MDI/MDIX-WAN-Ports sind

die Anschlüsse für das Ethernet-Kabel

an das Kabel- bzw. DSL-Modem.

Der WAN2-Port ist kongurierbar und

kann einen WAN2- oder DMZ-Port

für duale WAN-Verbindungen

unterstützen oder zu systeminternen

Serverfarm-Zwecken dienen.

F Konsolenport Zum Zugriff auf CLI (Command Line

Interface/Befehlszeilenschnittstelle)

über ein RJ45-to-DB9 Konso-

lenkabel.

Tabelle 1. Beschreibung der Vorderseite des

DSR-500/1000

Gerätestatus-LEDs und Ethernet-Port-LEDs

Die Geräte-LEDs zeigen Informationen über den

aktuellen Gerätestatus an. Die BETRIEBSANZEIGE/

STATUS-LED leuchtet während des Einschalt- und

Hochfahrvorgangs durchgehend orangefarben.

Der Vorgang dauert etwa eine Minute. Danach

leuchtet die LED durchgehend grün. Wenn Sie das

Gerät ausschalten und dann wieder einschalten

möchten, ist es ratsam, zwischen dem Ausschalten

und dem erneuten Einschalten ein paar Sekunden

zu warten. Die Ethernet-LEDs zeigen den Status

für jeden Ethernet-Port an. In Tabelle 2 sind Name,

Farbe, Status und Beschreibung für jede Geräte-

LED aufgeführt.

Abbildung 2. Ethernet RJ-45 Port LEDs

TX/RX-

Status

Verbindungs-

geschwindigkeit

Vorderseite - DSR-500/1000

Produktübersicht

Hinweis: DSR-500 unterstützt nur einen

USB-Port.

Abbildung 1. Die Vorderseite des DSR-500/1000

EA C DB

8 D-Link Services Router

DEUTSCH

LED

Anzeigen

Farbe Status Beschreibung

Strom /

Status Orange-

farben/

Grün

Durchgehend

orangefarben Gerät während Einschalt-

und Hochfahrvorgang

Durchgehend

grün Ende Hochfahrvorgang

Blinkt orange-

farben Gerät abgestürzt und in

Wiederherstellmodus

Grün blinkend System defekt. Firmware-

Upgrades fehlge-

schlagen.

LED leuchtet

nicht Gerät ist ausgeschaltet.

USB Grün Durchgehend

grün Gute Verbindung

Grün blinkend Dieser Port ist aktiv

LED leuchtet

nicht Keine Verbindung

TX/RX-

Status Grün LED leuchtet

nicht Keine Verbindung

Durchgehend

grün Verbindung hergestellt

Grün blinkend Port sendet oder

empfängt Daten

Verbindungs-

geschwin-

digkeit

Grün/

Orange-

farben

LED leuchtet

nicht Port-Betrieb mit 10 Mbit/s

Durchgehend

grün Port-Betrieb mit

100 Mbit/s

Durchgehend

orangefarben Port-Betrieb mit

1000 Mbit/s

Installation des Geräts

Standardeinstellungen für die DSR-500/1000-Schnittstellen

Tabelle 2. Beschreibungen der Status-LEDs des Geräts

Installation und Verbindung

In diesem Abschnitt wird beschrieben, wie Sie ein

DSR-500/1000-Gerät in einem 19-Zoll-

Standardrack installieren und Kabel am Gerät

anschließen.

Erste Schritte

Beachten Sie die folgenden Vorsichtsmaßnahmen,

um Fehler, Geräteausfälle und Verletzungen zu

vermeiden:

- Vor der Installation muss die Stromversorgung

getrennt werden.

- Das Gerät muss in einem Raum mit ausreichender

Belüftung betrieben werden. Die Raumtemperatur

darf 40oC

- Vor und hinter dem Gerät muss sich 1 Meter

freier Platz benden.

- Achten Sie beim Installieren des Geräts in einem

Rackrahmen darauf, dass die Lüftungsöffnungen

an den Seiten des Gehäuses nicht blockiert

sind. Stellen Sie sicher, dass geschlossene

Racks über Lüfter und seitliche Lüftungsschlitze

verfügen.

- Beseitigen Sie vor der Installation die folgenden

Gefahrenquellen: feuchte oder nasse Böden,

Lecks, beschädigte oder nicht geerdete Strom-

kabel und fehlende Sicherheitserdungen.

Das DSR-500/1000-Gerät kann in ein Geräterack

mit einer Standardgröße von 19 Zoll eingebaut

werden. So installieren Sie ein Gerät in einem Rack:

1. Bringen Sie die Befestigungsklammern an den

beiden Seiten des Gehäuses an, wie in

Abbildung 3 gezeigt, und xieren Sie sie mit

den mitgelieferten Schrauben.

Ethernet-

Schnittstelle

Schnittstel-

lentyp IP-Adresse

Webbasiertes

Management

LAN (1-4) /

WLAN

Statische IP 192.168.10.1/24 Aktiviert

WAN1 DHCP-Client 0.0.0.0/0 Deaktiviert

WAN2

(Kongurier-

barer Port)

DHCP-Client

(Standard)

0.0.0.0/0 Deaktiviert

Statische IP

(wenn als DMZ

konguriert)

172.17.100.254/24 Deaktiviert

Tabelle 3. Standardschnittstellen-Einstellungen

Hinweis: Standardmäßig ermöglichen D-Link

Services Router aus Sicherheitsgründen nur den

webbasierten Zugriff über LAN- und WLAN-Schnitt-

stellen.

WAN2 ist ein kongurierbarer Port. Er unterstützt

verschiedene und spezielle Anwendungsmöglich-

keiten. Wird der WAN2-Port als DMZ-Port konguriert,

wird die IP-Adresse auf 172.17.100.254 geändert.

Abbildung 3. Anbringen der Rackbefestigungsklammern

Altri manuali per DSR-500

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali D-Link Router di rete

D-Link

D-Link DIR-615/X Manuale utente

D-Link

D-Link DIR-130 - Broadband VPN Router Manuale utente

D-Link

D-Link DSS-24+ Manuale utente

D-Link

D-Link DIR-825/GF Manuale utente

D-Link

D-Link DFL-210 - NetDefend - Security Appliance Manuale utente

D-Link

D-Link VoIP Wireless Router DVG-G5402SP Manuale utente

D-Link

D-Link DIR-516 Manuale utente

D-Link

D-Link DES-3624 - Switch - Stackable Manuale utente

D-Link

D-Link DSL-G624M Manuale utente

D-Link

D-Link DSR-250 Manuale utente

D-Link

D-Link Air Xpert DI-774 Manuale utente

D-Link

D-Link DXS-3400 SERIES Manuale

D-Link

D-Link DI-808HV Manuale utente

D-Link

D-Link DSL-522T Manuale utente

D-Link

D-Link DSL-500 Manuale di installazione

D-Link

D-Link DES-1316K Manuale utente

D-Link

D-Link DWC-2000 Manuale utente

D-Link

D-Link DSL-3788 Manuale utente

D-Link

D-Link EAGLE PRO AI N300 Smart Manuale utente

D-Link

D-Link COVR-C1203 Manuale utente

D-Link

D-Link DWR-953 Manuale utente

D-Link

D-Link DIR-850L Manuale utente

D-Link

D-Link DSL-124 Manuale utente

D-Link

D-Link DIR-822 Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza