D-Link DCS-6513/E Manuale utente
This document will guide you through the
basic installation process for your new D-Link
Network Camera.
DCS-6513
Documentation also available on
CD and via the D-Link Website
Quick Installation Guide
Full HD WDR Day & Night Outdoor Dome Network Camera
Quick Installation Guide
Installationsanleitung
Guide d’installation
Guía de instalación
Guida di Installazione
D-Link DCS-6513 Quick Install Guide 1
ENGLISH
DCS-6513 Quick Install Guide
This installation guide provides basic instructions for installing the DCS-6513 Network
Camera on your network. For additional information about how to use the camera,
please see the User’s Manual which is available on the CD included in this package or
from the D-Link support website.
Installation Steps
1. Verify the package contents against the list below.
2. Hardware Overview
3. SD Card Installation
4. Hardware Installation
5. Conguration with Wizard
6. Adjusting the lens 3-axis angel
1. Package Contents
DCS-6513 Network Camera
Manual and Software on CD-ROM
Quick Install Guide
Power Adapter
Security Wrench
Extension Adapter
Cable Cover
Screws
Rubber Plug
Weather Shield
If any of the above items are missing, please contact your reseller.
Safety Notice:
Installation and servicing should be done by certied technicians so as to conform to all
local codes and prevent voiding your warranty.
D-Link DCS-6513 Quick Install Guide
2
ENGLISH
2. Hardware Overview
Install the Micro SD Card
Push the Micro SD Card into the camera
with the gold contacts oriented towards the
base of the camera. To eject the Micro SD
Card, push the Micro SD Card into the slot.
3. Micro SD Card Installation
Disassemble the Camera
Open the camera enclosure by loosen the
4 screws. Lift the dome off the base of the
camera.
Power Connector
Connects to 12 V DC power
24 V Power Connector
Connects to 24 V AC power
BNC
Analog video output
Ethernet Jack
RJ-45 connector for Ethernet whichcan also be used to
power the camera using Power over Ethernet (PoE)
Reset Button
Resets camera to factory
default settings
Audio In
Connects to a microphone
DI/DO Wiring, 12V DC output
I/O connectors for external
devices
Audio Out
Connects to speakers
D-Link DCS-6513 Quick Install Guide 3
ENGLISH
4. Standard Mounting Instructions
Mounting Installation
Please see the User Manual for detailed instructions regarding installation and mounting
of the camera using a mounting bracket.
Style 1 - Concealed Cable Installation
Height: 23 mm (0.9 inches)
Diameter: 183 mm (7.2 inches)
Weight: 400 g (0.9 lbs)
Figure 2.2
Figure 2.1
Weather Shield
Weather shield
37mm screw
D-Link DCS-6513 Quick Install Guide
4
ENGLISH
Style 2 - Exposed Cable Installation
Height: 23 mm (0.9 inches)
Diameter: 183 mm (7.2 inches)
Weight: 400 g (0.9 lbs)
Figure 2.3 Figure 2.4
Figure 2.6
Figure 2.5
D-Link DCS-6513 Quick Install Guide 5
ENGLISH
Pendant Mount (DCS-34-2)
Height: 201 mm (7.9 inches)
Diameter: 150 mm (5.9 inches)
Weight: 665 g (1.45 lbs)
Figure 3.4
Pendant
Bracket
Bracket
Cap
Rubber
Seal
Figure 3.2
Figure 3.3
Figure 3.1
Bracket
Cap
Mounting
Plate
D-Link DCS-6513 Quick Install Guide
6
ENGLISH
Bent Mount (DCS-34-3)
Height: 253 mm (9.96 inches)
Diameter: 150 mm (5.9 inches)
Weight: 770 g (1.7 lbs)
Bracket Cap
Bent
Bracket
Figure 4.2
Figure 4.4
Figure 4.3
Figure 4.1
Bracket
Cap
Mounting
Plate
Dome
Camera
Bent
Bracket
D-Link DCS-6513 Quick Install Guide 7
ENGLISH
Connection with a PoE Hub
If you are using a PoE hub, connect the IP camera to the hub via an Ethernet cable,
which will provide transmission of both power and data over a single cable.
General Connection Using 24 V AC Power Wiring
1. Connect the network camera to a hub via an Ethernet cable.
2. Connect the supplied power cable from the camera to a power source such as your
building's emergency power.
General Connection Using 12 V DC Power Adapter
1. Connect the network camera to a hub via an Ethernet cable.
2. Connect the supplied power cable from the camera to a power outlet.
D-Link DCS-6513 Quick Install Guide
8
ENGLISH
5. Conguration with Wizard
Click Setup Wizard to begin the installation.
Insert the DCS-6513 CD into your computer's CD-ROM drive to begin the installation. If
the Autorun function on your computer is disabled, or if the D-Link Launcher fails to start
automatically, click Start > Run. Type D:\autorun.exe, where D: represents the drive
letter of your CD-ROM drive.
After clicking Setup Wizard, the following window will open.
Click Next to continue.
Click Yes to accept the License Agreement.
Click Finish to complete the installation.
To start the installation process, click Next.
Note: The installation may take several minutes to
nish.
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali D-Link Telecamera di sicurezza
D-Link
D-Link DCS-5009L Manuale utente
D-Link
D-Link DCS-936L Manuale utente
D-Link
D-Link DCS-936L Manuale
D-Link
D-Link DCS-6112 Manuale utente
D-Link
D-Link DCS-7413 Manuale utente
D-Link
D-Link DCS-6100LH Manuale utente
D-Link
D-Link DCS-5615 Manuale utente
D-Link
D-Link DCS-960L Manuale utente
D-Link
D-Link DCS-931L Cloud Camera 1050 Manuale utente
D-Link
D-Link DCS-3716 Manuale utente
D-Link
D-Link DCS-3511 Manuale utente
D-Link
D-Link DCS-1100 Manuale utente
D-Link
D-Link DCS-4712E Manuale utente
D-Link
D-Link DCS-6111 Manuale utente
D-Link
D-Link DCS-2530L Manuale
D-Link
D-Link DCS-5010L Manuale utente
D-Link
D-Link DCS-3410 Manuale utente
D-Link
D-Link DCS-3010 Manuale utente
D-Link
D-Link DCS-3710 Manuale utente
D-Link
D-Link SECURICAM DCS-910 Manuale utente
