D-Link DGS-1016D - Switch Manuale utente

16 / 24-PORT GIGABIT DESKTOP SWITCH

DGS-1016D/DGS-1024D

Quick Installation Guide+

Installations-Anleitung+

Guide d’installation+

Guía de instalación+

Guida di Installazione+

Installatiehandleiding+

Instrukcja instalacji+

Instalační příručka+

Telepítési Segédlet+

Installasjonsveiledning+

Installationsvejledning+

Asennusopas+

Installationsguide+

Guia de Instalação+

Οδηγός Γρήγορης Εγκατάστασης το+

Vodič za brzu instalaciju+

Kratka navodila za namestitev+

Ghid de instalare rapidă+

Quick Installation Guide

DGS-1016D / DGS-1024D

16 / 24-Port Gigabit Desktop Switch

Check Your Package Contents

These are the items included with your DGS-1016D / DGS-1024D purchase:

Notice Before Setup the DGS-1016D / DGS-1024D

The setup of the Switch can be performed using the following steps:

A. Install the DGS-1016D / DGS-1024D in a fairly cool and dry place. See Technical

Specifications for the acceptable operation temperature and humidity ranges.

B. Install the Switch in a site free from strong electromagnetic source, vibration, dust, and direct

sunlight.

C. Leave at least 10cm of space at the left and right hand side of the Switch for ventilation.

D. Visually inspect the power cable and ensure that it is firmly inserted into a suitable power outlet.

Installation

Desktop or Shelf Installation Rack Installation

When installing the Switch on a

desktop or shelf, the rubber feet

included with the device must be first

attached. Attach these cushioning feet

on the bottom at each corner of the

device. Allow enough ventilation space

between the device and the objects

around it.

The Switch can be mounted in an EIA standard size, 19-inch

rack, which can be placed in a wiring closet with other

equipment. To install, attach the mounting brackets on the

switch’s front panel (one on each side) and secure them with

the screws provided.

Then, use the screws provided with the equipment rack to

mount the Switch in the rack.

DGS-1016D /

DGS-1024D

Quick Installation

Guide

CD-ROM

with Product document

Power Cord Rack-mount

bracket

Connecting the DGS-1016D / DGS-1024D Gigabit Ethernet

Switch to Your Network

DGS-1016D DGS-1024D

A. Power

The Switch can be used with AC power sources 100 - 240 VAC, 50 - 60 Hz. The Switch’s

power supply will adjust to the local power source automatically and may be turned on

without having any or all LAN segment cables connected.

B. Gigabit Ethernet Ports

These ports support network speeds of 10Mbps, 100Mbps or 1000Mbps, and can operate in

half- and full- duplex transfer modes. These ports also support automatic MDI/MDIX

crossover detection, which gives the Switch true, “plug and play” capabilities. Just connect

any network cable between the Switch and the device, and The Switch will automatically

detect the settings of the device and adjust itself accordingly.

LED Indicators

DGS-1016D DGS-1024D

The LED Indicators will allow you to monitor, diagnose and troubleshoot any potential problem

with the switch, connection or attached devices.

A. Power

This lights green while the Switch is receiving power.

B. Link/Act/Speed

When connected to a 1000Mbps device, this LED indicator light is green when the port is

connected to a device and will blink as data is transmitted or received.

When connected to a 10/100Mbps device, this LED indicator light is amber when the port is

connected to a device and will blink as data is transmitted or received.

C. Cable Diagnostics (during boot up only)

Open or short circuit Link/Act/Speed LED light amber.

Technical Support

United Kingdom (Mon-Fri)

Home Wireless/Broadband 0871 873 3000 (9.00am–06.00pm, Sat 10.00am-02.00pm)

Managed, Smart, & Wireless Switches, or Firewalls 0871 873 0909 (09.00am –05.30pm)

(BT 10ppm, other carriers may vary.)

Ireland (Mon-Fri)

All Products 1890 886 899 (09.00am-06.00pm, Sat 10.00am-02.00pm)

€0.05ppm peak, €0.045ppm off peak Times

Internet

http://www.dlink.co.uk

ftp://ftp.dlink.co.uk

Altri manuali per DGS-1016D - Switch

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali D-Link Interruttore

D-Link

D-Link DES-7200 Manuale

D-Link

D-Link DIS-100G-10S Manuale utente

D-Link

D-Link GO-SW-8G Manuale utente

D-Link

D-Link DXS-1210-10TS Manuale utente

D-Link

D-Link DWS-1008 Manuale utente

D-Link

D-Link DES-3010FA Manuale utente

D-Link

D-Link DES-3252P - Web Smart Switch Manuale utente

D-Link

D-Link D DGS-3048 DGS-3048 Manuale utente

D-Link

D-Link DXS-3250 - xStack Switch - Stackable Manuale utente

D-Link

D-Link DES-1026G/E1A Manuale utente

D-Link

D-Link DGS-105 - Switch Manuale utente

D-Link

D-Link DKVM-2K Manuale utente

D-Link

D-Link DXS-3600-32S Manuale utente

D-Link

D-Link TM DES-6500 Manuale utente

D-Link

D-Link DKVM-2U Manuale utente

D-Link

D-Link DUB-2340 Manuale utente

D-Link

D-Link DGS-3700 Series Manuale utente

D-Link

D-Link DGS-3212SR Manuale utente

D-Link

D-Link DGS-3100 SERIES Manuale utente

D-Link

D-Link DWS-3227P - xStack Switch - Stackable Manuale utente

D-Link

D-Link DKVM-4U Manuale utente

D-Link

D-Link DGS-1210-28P/FL Manuale utente

D-Link

D-Link DKVM-IP16LCD Manuale utente

D-Link

D-Link mydlink DCH-G022 Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manuale utente