D-Link Nuclias DNH-100 Manuale utente
www.dlink.com
Fragen? Unser lokales Support-Team unterstützt Sie gern. © 2023 D-Link (Deutschland) GmbH
Manual how to bind the
Switches into the Nuclias Connect
For Nuclias Connect Hardware DNH-100 Rev.A and Nuclias Connect Software DNC-100
For SWITCH Rev.F and Rev.G
To bind the switch into the Nuclias Connect please follow these steps.
1. Requirements
- DGS-1210 in Rev.F with firmware version 6.30.xx or higher
- DGS-1210 in Rev.G with firmware version 7.30.xx or higher
- DGS-1100V2 in Rev.A with 10 Ports and more with the
Firmware version 4.00b019 or higher
- DXS-1210 in Rev.B with Firmware version 2.01b10 or higher
- DNH-100 Nuclias Conenct Hub with the actual Firmware 1.2.1.7 or higher.
Or DNC-100 Nuclias Connect Software in the actual Version 1.2.1.3 or higher.
The firmware files and software you can download from our D-A-CH-BE-NE-LUX
web sites https://www.dlink.com or https://ftp.dlink.de
2. Preparations
Different to the DAP Access Points the switch must be pre-configured so far
that it got an IP-address from the DHCP-Server in the network or has a static
IP-address compatible to the network.
By default the switch has the static IP-address 10.90.90.90
with subnet mask 255.0.0.0
Change the TCP/IP of the network connection temporarily to configure the
switch.
Alternative or if you don’t know the IP-address of your switch you can use our
Software D-Link Network Assistant (DNA) to find it out or to change it.
See following screenshot.
www.dlink.com
Fragen? Unser lokales Support-Team unterstützt Sie gern. © 2023 D-Link (Deutschland) GmbH
You can download the DNA from
https://ftp.dlink.de/software/DNA/D-Link_Network_Assistant_DNA_40021_all_en.zip
With the PC mouse go over the switch entry and then click on IP on the right side.
Then you can change the IP-address of the switch.
Note:
In the following steps granting that you already made a setup in
your DNH-100 / DNC-100 (following named as NC) and have it in use
with DAP-models, so the NC has a basic setup already.
3. Call the setup of your NC and log-in.
We recommend to use the English setup because the translation in other
languages isn’t fine sometimes.
- Chose English.
- Enter the username admin and your configured Admin-password.
- If necessary enter the displayed CAPTCHA.
- Click onto Login.
www.dlink.com
Fragen? Unser lokales Support-Team unterstützt Sie gern. © 2023 D-Link (Deutschland) GmbH
4. On the left go to the menu Configuration and then Create Profile.
Upper-right click onto Add Network to create a new Switch-Profile.
Note:
Switches can’t be bound into AP-Profiles, also AP not into Switch-Profiles.
5. Create a newSite or chose an already existing Site, in this you added an Access
point profile and then add a new Network.
For this give (the site and) the Network a name and then click on Next.
www.dlink.com
Fragen? Unser lokales Support-Team unterstützt Sie gern. © 2023 D-Link (Deutschland) GmbH
6. - Chose the Country where the switch has to work.
- If necessary modify the Time Zone.
- Set a hook at Switch.
- At Series Supported you must mark the Switch-Type this you want to add.
- At Password you must enter the Admin-password this the switch has to get
from the NC-Profile as soon as it will be bound-in.
Click on Next.
7. Normally it is fine to use Layer 2.
Click on Next.
www.dlink.com
Fragen? Unser lokales Support-Team unterstützt Sie gern. © 2023 D-Link (Deutschland) GmbH
8. Upper-left click onto Discovery to let search for switches.
9. The available and compatible switches in the network will be found.
Mark the switch this you want to bind into the NC-Profile.
Enter the Admin-password this the switch actually has.
- The default Admin-password is admin.
- If you already have changed the Admin-password then enter this.
Click on Import to take over the marked swich into the NC-Profile.
www.dlink.com
Fragen? Unser lokales Support-Team unterstützt Sie gern. © 2023 D-Link (Deutschland) GmbH
Recommendation!!
For each switch create an own NC-Profile: An own Site or an already exiting site with an
own Network each.
Else it can become difficult because the NC displays all LAN ports of all switches in the
NC-profile like they are one switch.
Example: The LAN ports of three DGS-1210-10P will be listed as 30 ports –a
differentiation which port if from which switch won’t be so easy.
10. Click on Yes.
11. The displayed NC flickers a few times now.
Please what until this ends.
Click on Apply & Exit.
www.dlink.com
Fragen? Unser lokales Support-Team unterstützt Sie gern. © 2023 D-Link (Deutschland) GmbH
12. After 3-5 minutes the switch will be displayed in the Dashboard.
Click onto this…
… then the Status of the switch will be displayed.
Normally at this moment it is boarding.
Status is orange = Boarding
After additionally 3-5 minutes the Status is green = Connected
The switch can be managed and configured via the NC now.
www.dlink.com
Fragen? Unser lokales Support-Team unterstützt Sie gern. © 2023 D-Link (Deutschland) GmbH
13. To access the possible settings of the switch in the NC, on the left go to the
menu Configuration and then Profile Settings.
There inside the created profile of the switch you can make several settings.
With it the binding of the switch into the Nuclias Connect is finished.
Example:
Each a DGS-1210 Rev.F and G is bound into the Nuclias Connect:
www.dlink.com
Fragen? Unser lokales Support-Team unterstützt Sie gern. © 2023 D-Link (Deutschland) GmbH
Please see also the following manuals
Basic Setup of the DNH:
https://ftp.dlink.de/dnh/dnh-100/documentation/DNH-
100_howto_reva_Grundrichtung_de.pdf
The Nuclias Connect app:
https://ftp.dlink.de/dnh/dnh-100/documentation/DNH-
100_howto_reva_NucliasConnectApp_de.pdf
Tips:
https://ftp.dlink.de/dnh/dnh-100/documentation/DNH-100_howto_reva_Tipps_de.pdf
For further manuals please visit our FTP server
https://ftp.dlink.de/dnh/dnh-100/documentation/
and our websites
https://www.dlink.com/de/de
https://www.dlink.com/be/fr
https://www.dlink.com/be/nl
https://www.dlink.com/nl/nl
Altri manuali per Nuclias DNH-100
4
Altri manuali D-Link Interruttore
D-Link
D-Link DGS-3620-28PC-SI Manuale utente
D-Link
D-Link DKVM-222 Manuale utente
D-Link
D-Link des-1010g Manuale utente
D-Link
D-Link KVM-222 Manuale utente
D-Link
D-Link Web Smart Switch DGS-1210-16 Manuale utente
D-Link
D-Link DES-5200 Manuale utente
D-Link
D-Link DKVM-4U Manuale utente
D-Link
D-Link DGS-1005A Manuale utente
D-Link
D-Link xStack Manuale utente
D-Link
D-Link DGS-3620-28SC-EI Manuale
D-Link
D-Link DFE-550TX Manuale utente
D-Link
D-Link DGS-1100-05PD Manuale utente
D-Link
D-Link DES-1005P Manuale utente
D-Link
D-Link DES-1024D Manuale utente
D-Link
D-Link DGS-1016S Manuale utente
D-Link
D-Link DIS-RK200G Manuale utente
D-Link
D-Link DES-1228 - Web Smart Switch Manuale utente
D-Link
D-Link KVM-121 Manuale utente
D-Link
D-Link DGS-1008MP Manuale utente
D-Link
D-Link DMS-107/E Manuale utente
