D-Link DPH-C160S Manuale utente

Handset & Base Station

User Guide

DPH-C160S

v1.01

2 www.dlink.com.au

1 6

3 8

3 www.dlink.com.au

1 Ring Indicator

2 LCD Display

3 VoIP call

4 Menu/OK

5 PSTN call

6 Ear speaker

7 Up scroll

8 Disconnect/on hook

9 Clear entry/Power on/off

10 Down scroll

11 Microphone

4 www.dlink.com.au

Index

INSTALLATION 5 PHONE BOOK 17

Unpacking 5 Using the Phone Book 17

Connection 5 Keypad Characters 17

Belt Clip 6 Dialling from the Phone Book 17

Battery 6 Storing Names/Numbers 18

Battery Charge Indicator 7 Changing Names/Numbers 18

Turning The Handset On and Off 7 Deleting Entries 18

Range 7 Erasing all Entries 19

(Out of Range Warning) 8

Headset 8 CALLER LIST 20

Handset Indicator 8 PSTN Calls 20

Base Unit Indicators 8 Erase All 20

The LCD Display 9

HS SETTING 21

OPERATION 10 PSTN Ring 21

Making a VoIP Call 10 VoIP Ring 21

Making a PSTN Call 10 Set Keytone 22

Receiving a VoIP or PSTN Call 10 User name 22

Volume Control 11 Set PIN 23

Hands free Speakerphone 11 Auto Answer 23

Handset Locator 12 Anykey Talk 24

Language 24

MENU 13

Set Default 24

Description of the menu system 13

BS SETTING 25

SYSTEM INFO 14 Dial Mode 25

My IP 14 Flash Time 25

My Phone No. 14 Pause Time 26

New HS 26

CALL LOG 15 Remove HS 26

Missed 15 Call Barring 27

Received 15 Change PIN 28

Dialled 15 BS Default 28

CONTACT LIST 16 SELECT BASE 29

HS REGISTER 30

TROUBLESHOOTING 31

5 www.dlink.com.au

Installation

UNPACKING

The package contains:

- Handset

- Base Station

- 3 AAA batteries

(Ni-MH 1.2V 600mAh)

- Mains Adapter (9VAC 1000mA)

- Ethernet Cable

- Phone Cable

- Belt Clip

- CDROM (Quick Setup Utility)

IMPORTANT!

Only use with the supplied power adapter.

CONNECTION

1. Connect the mains to adapter to the POWER socket on the base

station and an electrical wall socket.

2. Carefully remove the handset battery cover. Insert the batteries

into the handset ensuring correct battery polarity is observed,

replace the battery cover.

3. Place the handset in the base station, with the keypad facing

outwards. Once the handset is correctly positioned in the base

station, a beep will be heard.

4. Leave the handset to charge initially for 12 hours before use.

5. Connect the phone cable to the RJ-11 port on the back of the

base station.

6. Plug the other end of phone cable into the telephone network

wall socket.

7. Connect the Ethernet cable to the LAN port on the back of the

base station.

8. Plug the other end of Ethernet cable into a spare port in your

Router/Gateway.

IMPORTANT!

Under power failure conditions the DPH-C160S will not operate. Please ensure that a

separate telephone not dependant on local power is available for emergency use. The

earpiece of the handset may attract small objects such as staples and pins, care should

be taken when placing the handset near these items. Do not place the base station close

to other electrical equipment such as TVs, microwaves, computer screens, fans, etc. This

will minimise the risk of interference. Do not place the base station in areas where it will

be exposed to direct sunlight or other major heat sources.

6 www.dlink.com.au

Installation

BELT CLIP

A belt clip is included, which can be fitted on the back of the handset.

The belt clip enables the handset to be attached to a belt, waistband or

similar. To attach the clip, align it with the indents on the sides of the

handset and press it into place over the back of the handset. You

should hear it click into place.

BATTERY

The DPH-C160S is supplied with environmentally-friendly nickel metal

hydride (NiMH) batteries – 3 x AAA 1.2V. As with all batteries,

performance may degrade over time; should you notice that the

standby time has reduced considerably or there are signs of leakage,

the batteries should be replaced. Fully-charged batteries will last for

approx 120 hours in standby and 10 hours call time. These operation

times apply at normal room temperate. Full battery capacity will be

achieved once the batteries have been charged 4-5 times, completely

discharged batteries will take 10 hours to fully recharge. To maintain

optimum charge capacity it is better for handsets to be charged every

other night, rather than after every call.

The base station has an automatic charging mechanism that prevents

the batteries from being overcharged or damaged by prolonged

charging.

PLEASE NOTE!

To ensure and maintain good charging of the handset batteries we recommend that the

base station and handset charging contacts are cleaned regularly. i.e. monthly, with a

pencil eraser and/or soft dry cloth. The recharging system used in this model may result

in the handset and the batteries becoming warm. This is normal and will not damage the

equipment.

When the telephone is installed for the first time, the batteries must be charged for 12

hours before using the telephone. Use original batteries only. The warranty does not

cover any damage caused by incorrect use of batteries. Please dispose of any batteries in

a responsible and environmentally friendly manner.

7 www.dlink.com.au

Installation

BATTERY CHARGE INDICATOR

The symbol on the LCD display of the handset indicates when it is

time to recharge the batteries. When the battery is running low the

LCD display will show an empty battery symbol and a warning tone will

be heard. If the handset is not recharged at this time, the phone will

power off and cease to function until it is recharged.

The symbol will be displayed when the battery is fully charged.

PLEASE NOTE!

When the handset has been switched off and then on again it may take up to five

minutes for the correct charge to be shown on the LCD display.

TURNING THE HANDSET ON/OFF

Press and hold the for a few seconds to turn the handset on or off.

When the handset is turned off, no calls can be made or received. The

handset is designed to be always turned on, i.e. it is not necessary to

turn it off overnight. However, we recommend turning the handset off

if it is not to be used for a prolonged period of time, e.g. during a

holiday. If the batteries run low, the handset will turn itself off. If the

handset is power off and placed back into the cradle on the base

station it will power itself back on and start to recharge within 1-2

minutes.

RANGE

The range of the DPH-C160S varies depending on different factors in

the surrounding environment. Radio waves transmitting the call may be

hindered by obstructions or signal reflections that can reduce the

range.

Specified ranges require unobstructed transmission between the

handset and the base station. In such ideal conditions the DPH-C160Ss

range can be up to 300 metres. In densely populated areas, houses,

apartments, etc. the range will be reduced. Try to get the best range

by relocating the base station, the ideal location is a high and

unobstructed place.

8 www.dlink.com.au

Installation

Out of Range Warning

If the handset is carried to far from the base station during a call, the

sound quality will deteriorate and a warning tone will be heard. Unless

the handset is moved closer to the base station within a few seconds

the call will be disconnected.

HEADSET

The handset can be used with an optional headset and is equipped with

a socket for this. Headsets are available as an extra accessory and can

be purchased from your local retailer.

Then using the optional headset there is not change in the way a call is

received or made. When a headset is connected the handset

microphone and earpiece will be automatically disabled.

PLEASE NOTE!

The volume may be high on the headset earpiece. Adjust the setting immediately when

you connect a headset.

HANDSET INDICATOR

The indicator light above the LCD display will flash during the ringing

for an incoming call.

BASE UNIT INDICATORS

There are several indicator lights located on the base station and will

function differently depending on the function that is occurring. The

Power/Status light will be solid when the unit is in an operational state

and flashing while the unit is booting up and obtaining its settings from

the VoIP provider. The VoIP light will be solid while making a call

through the VoIP service and will be flashing while making a PSTN call

and finally the WAN light will be solid when you have a connection to

your Router/Gateway and then flash when transmitting data.

9 www.dlink.com.au

Installation

THE LCD DISPLAY

Icon Description

Signal Strength

Indicates the current signal strength between the handset and the base

station more bars indicate higher signal strength. This icon is always

displayed when the telephone is on.

In Use

Displayed when the telephone is in use (i.e., a telephone call is in

progress).

Speakerphone

Indicates the handset is in speakerphone mode.

Line

Indicates the line is engaged.

Operation Mode

Displayed when the handset is in operation mode.

Caller ID

Indicates a new call. To view the caller, access the Caller ID menu.

Battery Status

Indicates the relative charge state of the handset’s batteries more bars

indicates a higher level of battery charge. During the charging cycle,

this icon will flash. This icon is always displayed when the telephone is

on.

10 www.dlink.com.au

Operation

MAKING A VOIP CALL

1. Enter the required telephone. Mistakes can be erased by

pressing the Clear button.

2. Press and the telephone number will now be dialled via the

VoIP service.

3. Press to terminate the call.

MAKING A PSTN CALL

1. Enter the required telephone. Mistakes can be erased by

pressing the Clear button.

2. Press and the telephone number will now be dialled via the

PSTN.

3. Press to terminate the call.

RECEIVING A VOIP OR PSTN CALL

1. Wait for the handset to ring. The indicator light on the handset

will flash.

2. Press or to answer the incoming VoIP or PSTN call.

3. Press to terminate the call.

PLEASE NOTE!

During a call you change the volume as shown in the Volume Control section.

If the telephone cannot connect to a line, you may not hear any dial tone on the handset

at all. The problem may be due to the batteries running low, the handset being too far

away from the base station, loss of Internet connection or all of the transmission

channels are being engaged.

Altri manuali per DPH-C160S

Indice

Altri manuali D-Link Telefono

D-Link

D-Link DWR-720PW T2 Manuale per l'uso e la cura

D-Link

D-Link DWR-720 Manuale utente

D-Link

D-Link i2eye DVC-1100 Manuale utente

D-Link

D-Link i2eye DVC-1000 Manuale utente

D-Link

D-Link DVC-2000 Manuale utente

D-Link

D-Link i2eye DVC-1000 Manuale utente

D-Link

D-Link DPH-70s Manuale utente

D-Link

D-Link DPH-540 Manuale utente

D-Link

D-Link DVC-1000 Manuale utente

D-Link

D-Link DVX-2002F Manuale utente

D-Link

D-Link GVC-3000 Manuale utente

D-Link

D-Link DVC 2000 - i2eye Broadband VideoPhone Video Conferencing... Manuale utente

D-Link

D-Link DVC-1000 Manuale utente

D-Link

D-Link DVC-2000 Manuale utente

D-Link

D-Link DPH-128MS - VoiceCenter VoIP Phone Manuale utente

D-Link

D-Link DVC-1100 Manuale utente

D-Link

D-Link DVX-2000MS-10P - VoiceCenter IP Phone Sys... Manuale utente

D-Link

D-Link DPH-540 Manuale utente

D-Link

D-Link DVX-2000MS-10P - VoiceCenter IP Phone Sys... Manuale utente

D-Link

D-Link DVC-1000 Manuale utente

D-Link

D-Link DPH-541 Manuale utente

D-Link

D-Link DVX-2000MS-10 - VoiceCenter IP Phone System Manuale utente

D-Link

D-Link DVC-1100 Manuale utente

D-Link

D-Link DWR-720/PW Manuale utente

Manuali Telefono popolari di altre marche

GE 2-9480 Manuale utente

Geemarc

Geemarc PHOTOPHONE 155 Manuale utente

Interquartz

Interquartz Gemini IQ333 Manuale utente

SSS Siedle

SSS Siedle HT 840-0 Manuale utente

Motorola

Motorola TITANIUM Manuale utente

Panasonic

Panasonic ICX Manuale utente

LG H870DS Manuale utente

Samsung

Samsung GT-I9500 Manuale utente

AT&T

AT&T Trimline 205 Manuale utente

Selta

Selta zenyth 600 Manuale utente

Doro

Doro AFTI 20 Manuale utente

UNIQCELL

UNIQCELL A1 Manuale utente

Panasonic

Panasonic KX Series Manuale utente

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Manuale utente

BT Decor 425 Manuale utente

NEC

NEC SV8500 Manuale utente

Teledex

Teledex PEARL Manuale utente

Ericsson

Ericsson Dialog 3213 Manuale utente