D-Link DAP-2620 Manuale utente

This document will guide you through the basic

installation process for your new access point.

Building Networks for People

DAP-2620

Documentation also available

via the D-Link Website

Quick Installation Guide

Wireless AC1200 Wave 2 Dual-Band

Wall-Plate PoE Access Point

Before You Begin

This installation guide provides instructions

for installing the DAP-2620 on your network.

Additional documentation is also available on

the D-Link support website.

• D-Link Nuclias Connect User Manual: For

additional information and instructions

on how to configure the device using

D-Link Nuclias Connect.

• DAP-2620 User Manual: For additional

information and instructions on how to

congure the device using the web user

interface.

Package Contents

This DAP-2620 package should include the

following items:

• 1 x DAP-2620

• 1 x Quick Install Card

• 1 x Mounting bracket

• 1 x Allen key and screw

If any of the above items are damaged or missing,

please contact your local D-Link reseller.

System Requirements

• A PC or laptop with a working Ethernet

adapter or wireless interface.

• Mozilla Firefox 52.0 or higher, Internet

Explorer 11 or higher, Safari 10.1 or higher,

Google Chrome 59 or higher.

• OS X 10.8.5, Windows 7, Linux (Ubuntu 12)

and higher.

Hardware Overview

LED Indicators

Figure 1: Front Panel LED

# LED Status Description

Power/

Status

LED

Solid

green

Indicates that

the access point

is working

correctly

Solid

red

Indicates that the

access point has

malfunctioned.

Table 1: LED Description

Interface Connectors

Figure 2: Bottom Connectors

# Connector Description

1 LAN Port Gigabit RJ-45

port for data.

2Telephone

Port

RJ-11 port for

connection

to phones.

3 Reset Button

Used for resetting

the device back

to factory default

settings.

Table 2: Interface Description

Figure 3: Back Connectors

1 2

# Connector Description

1Telephone

Port

RJ-11 port for a

telephone cable.

2LAN Port

(PoE)

Gigabit RJ-45 port for

data and Power over

Ethernet (PoE) power.

Table 3: Interface Description

Powering the Access Point

Use a standard Ethernet cable to connect the

LAN port on the DAP-2620 to a PoE power source

device such as a PoE switch or PoE injector.

Conguring the Access Point

Note: D-Link recommends conguring the

device before mounting it.

Using D-Link Nuclias Connect

The DAP-2620 is designed to be managed

through D-Link Nuclias Connect. Refer to the

D-Link Nuclias Connect Manual for detailed

conguration instructions.

Figure 4: Connecting through Nuclias Connect

1. Download the free Nuclias Connect

app from the App Store or Google Play

by searching for Nuclias Connect or by

scanning the QR code below.

2. Open the Nuclias Connect app and follow

the onscreen instructions to discover and

set up your device.

Manual Conguration

If you are not using Nuclias Connect, you may

manually congure the DAP-2620 using its web

user interface (UI). Refer to the DAP-2620 User

Manual for detailed conguration instructions.

Use the following methods to access the web

user interface:

Note: The management computer must be in

the same subnet as the DAP-2620.

1. Use an Ethernet cable to connect the

management computer to the PoE switch

or to the PoE Injector the DAP-2620 is

connected to.

2. Open a web browser on the management

computer and type in dap2620.local in the

address eld and press Enter.

3. When prompted, enter the default login

credentials:

User name: admin

Password: admin

Mounting the Access Point

For optimal coverage, mount the DAP-2620 on

the wall. An Ethernet cable running through

an electrical wall box should be pre-installed

before mounting.

1. Remove the mounting plate from the

device.

2. The Ethernet cable and the telephone

cable (optional) should pass through the

mounting plate. Attach the mounting plate

to the electrical wall box.

Figure 5: Attaching the Mounting Plate

Nuclias Connect

Software

DAP-2620 POE Switch or Router

3. Connect the Ethernet cable and telephone

cable (optional) to the device.

Figure 6: Connecting the Cables

4. Attach the DAP-2620 to the mounting

plate by snapping the device into place

onto the plate and use the Allen key and

screw to lock it in at the top.

Figure 7: Locking the Lock Plate

Reboot/Reset the Access Point

If necessary, the DAP-2620 can be manually

rebooted or reset to factory default settings.

Rebooting the device

Unplug the Ethernet cable to power o the

device and replug it to power it on again.

Resetting the device

Press and hold down the recessed reset

button at the bottom of the device between

6 to 15 seconds then release to reset the device

to its factory default settings.

Additional Information

For additional support, please refer to the

user manual, or visit your local D-Link support

website.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

o and on, the user is encouraged to try to correct the interference by one of the following

measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit dierent from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Non-modications Statement:

Any changes or modications not expressly approved by the party responsible for compliance

could void the user’s authority to operate this equipment.

Caution:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

This device and its antenna(s) must not be co-located or operating in conjunction with any other

antenna or transmitter except in accordance with FCC multi-transmitter product procedures. For

product available in the USA/Canada market, only channel 1~11 can be operated. Selection of

other channels is not possible.

Note

The country code selection is for non-USA models only and is not available to all USA models. Per

FCC regulations, all WiFi product marketed in the USA must be xed to USA operational channels

only.

RF Frequency Requirements

This device is for indoor use only when using all channels in the 5.15 to 5.25 GHz frequency range.

High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz

bands. These radar stations can cause interference with and/or damage this device. This device

will not operate on channels which overlap the 5600-5650 MHz band.

It is restricted to indoor environments only.

IMPORTANT NOTICE:

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance 24 cm

between the radiator and your body.

Product and Warranty Information

To nd out more about D-Link products or marketing information, please visit the website http://

www.dlink.com.

The D-Link Limited Lifetime Warranty information is available at

http://warranty.dlink.com/

位置: 中文使用說明書

電池使用安全說明

低功率警語:

• 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更

頻率、加大功率或變更原設計之特性及功能。

• 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應

立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之

無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機

設備之干擾。

• 使用此產品時應避免影響附近雷達系統之操作。

Ver. 2.00(WW)_130x183

2019/10/07

5300-00007534-01W

Altri manuali per DAP-2620

Indice

Altri manuali D-Link Punto di accesso wireless

D-Link

D-Link DAP-2553 - Wireless N Dual Band Gigabit Access... Manuale utente

D-Link

D-Link DWL-2130AP - xStack - Wireless Access Point Manuale utente

D-Link

D-Link DBA-3620P Manuale utente

D-Link

D-Link AirPlus Xtreme G DWL-2000AP Manuale utente

D-Link

D-Link DWL-6600AP Manuale utente

D-Link

D-Link DWL-8620APE Manuale utente

D-Link

D-Link Rangebooster N 650 Access Point DAP-1353 Manuale utente

D-Link

D-Link DWL-8710AP Manuale utente

D-Link

D-Link DAP-3315 Manuale utente

D-Link

D-Link DWL-8720AP Manuale utente

D-Link

D-Link UNIFIED WIRED & WIRELESS ACCESS SYSTEM... Guida di riferimento rapido

D-Link

D-Link DAP-2553 - Wireless N Dual Band Gigabit Access... Manuale utente

D-Link

D-Link DWL-7130AP - xStack - Wireless Access Point Guida all'installazione

D-Link

D-Link DWL-8220AP - AirPremier Wireless Switch Dualband Access... Manuale utente

D-Link

D-Link DWL-2700AP - AirPremier Outdoor Wireless Access... Manuale utente

D-Link

D-Link AirPremier N DAP-2690 Manuale utente

D-Link

D-Link DAP-1365 Manuale

D-Link

D-Link DAP-3666 Manuale utente

D-Link

D-Link DAP-2610 Manuale utente

D-Link

D-Link DWL-3600AP Manuale di servizio

D-Link

D-Link DAP-1360 Manuale utente

D-Link

D-Link AirPremier DAP-2553 Manuale utente

D-Link

D-Link DWL-6610AP Manuale utente

D-Link

D-Link DWR-966 Manuale utente

Manuali Punto di accesso wireless popolari di altre marche

Ubiquiti

Ubiquiti NanoStation NSM2 Manuale utente

Cisco

Cisco Aironet 1550 Series Manuale utente

Aruba

Aruba IAP-335 Manuale utente

Advantek Networks

Advantek Networks AWN-AP-54MR Manuale utente

IP-COM

IP-COM AP355 Manuale utente

Buffalo

Buffalo AirStation WLA-L11G Manuale utente

EnGenius

EnGenius EnStationACv2 Manuale utente

xG Technology

xG Technology xMax CN1300 Manuale utente

Widelink

Widelink ezWave WAP-1100 Series Manuale utente

Edimax

Edimax CAP1200 Manuale utente

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuale utente

Aruba

Aruba AP-203R Manuale utente

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuale utente

CreatComm

CreatComm TB5F Manuale utente

SineDigital

SineDigital MW-1500AP(H) Manuale utente

TP-Link

TP-Link AP9650 V1 Manuale utente

Draytek

Draytek VIGORAP 902 Manuale utente

EnGenius

EnGenius EAP350 Manuale utente