Dürkopp Adler 867 Manuale operativo

867

Additional Instructions

Puller Feed Drive

Property of Dürkopp Adler AG and protected by copyright. Any reuse of these contents, includ-

ing extracts, is prohibited without the prior written approval of Dürkopp Adler AG.

IMPORTANT

READ CAREFULLY BEFORE USE

KEEP FOR FUTURE REFERENCE

Table of Contents

Additional Instructions 867 - 02.0 - 12/2016 1

1 About this additional manual ....................................................3

2 Machine overview.......................................................................4

3 Operation.....................................................................................5

3.1 Activating the puller feed drive .....................................................5

3.2 Setting the top puller pressure......................................................6

4 Settings .......................................................................................7

4.1 Setting the feed distance..............................................................7

4.2 Setting the puller feed type...........................................................7

4.3 Setting the puller feed operating mode.........................................8

4.4 Setting the puller delay.................................................................8

4.5 Setting the angle of feed...............................................................8

4.6 Setting the material compensation values....................................8

5 Service.........................................................................................9

5.1 Initializing the puller feed drive.....................................................9

5.2 Setting other parameters..............................................................9

5.2.1 Setting the transmission ratios .....................................................9

5.2.2 Setting the puller feed pressure....................................................9

5.2.3 Setting puller feed operation.......................................................10

5.3 Malfunctions ...............................................................................10

6 Appendix ...................................................................................11

Table of Contents

2Additional Instructions 867 - 02.0 - 12/2016

About this additional manual

Additional Instructions 867 - 02.0 - 12/2016 3

1 About this additional manual

This additional manual describes the puller feed drive with DAC control.

For the standard functions, see the DAC Control Operating Manual.

Kits:

0867 591134

0867 591144

Machine overview

4Additional Instructions 867 - 02.0 - 12/2016

2 Machine overview

Fig. 1: Machine overview

(1) - Control panel

(2) - Top puller pressure regulator (3) - Puller feed drive button

(4) - Top puller

①

②

③

④

Operation

Additional Instructions 867 - 02.0 - 12/2016 5

3 Operation

3.1 Activating the puller feed drive

Fig. 2: Activating the puller feed drive

1. Activate the puller feed drive (1) switch on the control unit.

Leave the switch activated permanently.

2. Switch on the machine at the main switch (2).

3. Press the puller feed drive (3) button on the machine's arm.

The button lights up, the puller feed drive is activated.

(1) - Puller feed drive switch

(2) - Main switch (3) - Puller feed drive button

①② ③

Operation

6Additional Instructions 867 - 02.0 - 12/2016

3.2 Setting the top puller pressure

The pressure of the top puller can be set when the puller feed drive is ac-

tivated.

Fig. 3: Setting the top puller pressure

1. Activate the puller feed drive.

2. Pull the adjustment knob (1) up.

3. Turn the adjustment knob and set the pressure (0 - 6 bar):

•clockwise: to increase pressure

•counterclockwise: to reduce pressure

4. Push the adjustment knob (1) down.

(1) - Adjustment knob (2) - Pressure gauge

①

②

Settings

Additional Instructions 867 - 02.0 - 12/2016 7

4 Settings

Fig. 4: Settingsn

4.1 Setting the feed distance

The feed distance can be set between a length of 1 – 15 mm per stitch in

increments of 1/10.

1. Tochangethefeeddistanceofthetoppuller,pressthePlus/Minus (D)

buttons.

2. To change the feed distance of the bottom puller, press the Plus/

Minus (B) buttons.

4.2 Setting the puller feed type

Two types of feed are available: Constant or intermittent feed. With inter-

mittent feed, the speed is restricted and depends on the feed distance set.

1. Open the parameter t 14 11.

2. Set the feed height:

• 0: constant

• 1: intermittent

Information

To change quickly between the feed types, the puller feed type can be pro-

grammed to the freely programmable F-key on the control panel (parame-

ter t 52 20 = 23).

See also DAC Control operating manual.

(1) - Gauge A (Stitch length)

(2) - ESC key

(3) - F-key

(4) - Plus-/minus buttons forbottom

puller (B)

(5) - Plus-/minus buttons for top puller (D)

(6) - OK button

ESC

ABCD

++++

––––

PRESET

⑥

①

②

③

④⑤

Settings

8Additional Instructions 867 - 02.0 - 12/2016

4.3 Setting the puller feed operating mode

You can set when the puller should lift up automatically.

1. Open the parameter t 14 00.

2. Set the operating mode:

• 0: Puller is not lifted up

• 1: Puller is lifted up with sewing foot aeration

• 2: Puller is lifted with bar

• 3: Puller is lifted with sewing foot aeration and bar

4.4 Setting the puller delay

You can set the number of stitches until the puller is lowered.

1. Open the parameter t 14 03.

2. Set the number of stitches (0-255).

The puller feed button lights up, the puller feed drive is activated.

4.5 Setting the angle of feed

You can set the angle at which the puller is to feed.

0° is the reference position here.

The default settings are:

• 10° for the initial feed angle

• 170° for the final feed angle

1. Open the parameter t 14 12.

2. Set the initial feed angle (0-359°).

3. Open the parameter t 14 13.

4. Set the final feed angle (0-359°).

4.6 Setting the material compensation values

Slip properties of various materials can be compensated for.

1. Set a stitch length of 5 mm.

2. Open the parameter t 14 21.

3. Set the material compensation value for the top feed puller (0-255).

4. Open the parameter t 14 31.

5. Setthematerialcompensationvalueforthebottomfeedpuller(0-255).

Altri manuali per 867

Indice

Altri manuali Dürkopp Adler Macchina da cucire

Dürkopp Adler

Dürkopp Adler 559 - Manuale utente

Dürkopp Adler

Dürkopp Adler M-TYPE 667 Manuale utente

Dürkopp Adler

Dürkopp Adler 52 i Series Istruzioni operative

Dürkopp Adler

Dürkopp Adler 884 Istruzioni operative

Dürkopp Adler

Dürkopp Adler 767 - Manuale utente

Dürkopp Adler

Dürkopp Adler 838-xxxxxx-M series Istruzioni operative

Dürkopp Adler

Dürkopp Adler 867 Manuale utente

Dürkopp Adler

Dürkopp Adler 52 i Series Manuale utente

Dürkopp Adler

Dürkopp Adler 269 Manuale utente

Dürkopp Adler

Dürkopp Adler 650-16 Manuale utente

Dürkopp Adler

Dürkopp Adler 567 CLASSIC Manuale utente

Dürkopp Adler

Dürkopp Adler 967 Istruzioni operative

Dürkopp Adler

Dürkopp Adler 1767 Manuale utente

Dürkopp Adler

Dürkopp Adler 550-867 Manuale utente

Dürkopp Adler

Dürkopp Adler 767 - Manuale utente

Dürkopp Adler

Dürkopp Adler M-Type 869 Manuale utente

Dürkopp Adler

Dürkopp Adler DAC classic 271 Manuale utente

Dürkopp Adler

Dürkopp Adler 1767 Istruzioni operative

Dürkopp Adler

Dürkopp Adler 650-10 Istruzioni operative

Dürkopp Adler

Dürkopp Adler 550-D800 Manuale utente

Dürkopp Adler

Dürkopp Adler 827 Manuale utente

Dürkopp Adler

Dürkopp Adler D869 e-con Istruzioni operative

Dürkopp Adler

Dürkopp Adler D869 e-con Manuale utente

Dürkopp Adler

Dürkopp Adler 667 PREMIUM Manuale utente

Manuali Macchina da cucire popolari di altre marche

Riccar

Riccar RL634DE Manuale utente

Singer

Singer 2517 Manuale utente

Pfaff

Pfaff 3307-1 SERIES Manuale utente

Janome

Janome Quilt Maker Pro 18 VERSA Manuale utente

Siruba

Siruba C007JP Manuale utente

Husqvarna Viking

Husqvarna Viking Designer SE Manuale utente

Singer

Singer 148-5 Manuale utente

IKEA

IKEA SY Manuale utente

Pfaff

Pfaff 571 Manuale utente

Singer

Singer 15-91 Manuale utente

Brother

Brother BB370 Manuale utente

Pegasus

Pegasus WT100 Series Manuale utente

Reliable

Reliable 7100DB Manuale utente

Pfaff

Pfaff 937 Manuale utente

Singer

Singer 6038 Manuale utente

Singer

Singer 413K Manuale utente

Pfaff

Pfaff 1471 E1 Manuale utente

Kenmore

Kenmore 16677 - Serger Sewing Machine Manuale utente