Dagro Electronic X8100-MJ36 Manuale utente
HD IP camera
operating instructions
Dear customer, welcome to use this product, before using this product, please read the
operation instructions in detail, and keep this manual for future reference.
I
、
Realize your HD PTZ IP Camera.
II
、
Interface definition and connection diagram
①Network interface：using the network cable to access the Internet .
②WIFIantenna：receive WIFI signal；
③Memory card socket：insert memory card,support 32G:device can stock
video/picture;
④Power supply interface；connect power adapter
III、Mobile phone software operation
For better experience the convenience of this product , please
download mobile phone software before using this product:
1 Mobile phone software download:
1)IOS user can download and install 163eye in APP Store.
2)Android user can enter website :http://163eye.cc ,download and install
163eye
3)You can also input http://163eye.cc in the explorer to download it in PC，
Android version and IOS version can scan the QR code to download the
software directly，PC click to download directly.
2 Mobile phone ID register
Note：first time open the “163eye” software ，user need register
one ID as following:
①choose below “register”to enter
②choose“mobile phone register”or“email register”，click “next”
③input email box and password,click “next”(when use email register,
doesn’t need verification code ,register it directly; if mobile phone
register,the verification code will be sent to the phone by message.)
④if register successfully,it will show “congratulations,register
successfully”,and the system will automatically distribute one ID to you
at the same time.please remember this ID,it can be used as the user
name ,click “confirm”, input the password again,then you can login
normally.
3 Mobile phone network connection
There are two ways for connecting device to network：
1)Wired connection：after the camera power on,connect one end of
the cable to the camera ,the other end to the router LAN
network light will be normally on after connection
successfully.
2)WIFI connection：the users can follow the below ways if they wants to
start using WIFI to get connection with the camera when the camera is wired
connection：
A、please add the device to the 163eye device list： “Add device”,please
view the fourth part for the detail steps.
B、open 163eye software，１、choose“device”，click device name,choose
“settings”；２、choose “network settings”３、（please don’t choose
“WIFI” directly at the moment ）the following will search all of the
WIFI signal near it automatically,choose your WIFI ID ４、input WIFI
password Factory password is123,then open wifi successfully.
C、set WIFI by “intelligent online”：【details refer to 4、add device on mobile
phone》2）】
4 Add device on mobile phone
How to add the device to device list:
1）In the device list interface of the“163eye”software，when the camera is
in network and the phone is in the same WIFI,both of them are in one
LAN,the software will find all the devices
automatically,and only need choose ,add and set the access password
（Factory password is123）
2）open the 163eye software,click“Device”,choose the“+”button ,choose
“intelligent online”,click next and then choose the WIFI and WIFI
password you need,click the “next”again ,connect the device.
3）Add device manually：in the device interface of the 163eye software,click
the “+”,input ID and password.（Factory password is123）
5 The device monitor of mobile phone
1）、contact person：click the device icon that has been added in device list
to entry the monitor mode .
6 The video settings of mobile phone.
1）、Video：this device supports 32GB TF card in max ,if need record
video,please insert the memory card at first,and then open the 163eye :click
Device ->Device name ->settings->video settings,user can choose record
video manually ,alarm video, timing video.
2）、playback：this device support playback in mobile phone,open the 163eye
software:click Device->Device name->playback，user can find the playback
files according to the date, then play it directly .
7、Mobile phone zone settings
1）、Alarm learning code.
Note：this function is optional,please be sure your device has this
function.
This device with 8pcs remote control ,8*8=64pcs wireless
alarm(433frequency),support 8 groups.The following is the learning code
ways:
A、Please add device to device list in 163eye software.
B、Click Device->device name->settings->zone settings
C、Eg:you want to learn one door sensor that installed in the hall,the serial
number is 1.Click “Hall”-click number 1,pop-up:
Click “confirm”，and trigger the alarm you will learn at the same time(take
the door sensor as example,separate the door sensor will trigger the alarm).if
match code successfully,the words will be turn blue from gray,and will
pop-up :learn successfully”.
D、Back to device list interface ,click the right lock key of the device，
“ ”means Arming，“ ” means disarming，the alarm will be effective
if mach code successfully after arming 15secs.
E、“remote control”is special designed for alarm remote control ,the way of
matching code is the same as “A、B、C”，the function is equal to the right key
of the device list in the 163eye software，it can be used as
“arming,disarming”，but it need match with the device learning, here does
not explain in detail.
2）delete match code ：click the access number that had learned, then
confirm delete.
3）Alarm Setting：
Arming：there are two ways : one press the infrared remote control arming
key(lock key) that has learned successfully ;another is the arming keys
(lock key) in the back of the APP contact list, after arming ,when there is a
case, the device will send the alert to the APP actively , and send the scene
captured images to the alarm mail at the same time.
Push account,alarm mail:Click on the device name - > settings - > alarm
settings: add receiving alert APP ID in binding account (open 163eye
software,can be found after clicking on the first"settings" button from right
below, can add five account in max), alarm position write the receiving
alarm email address.
Motion detection: alarm as soon as the scene change.
Buzzer:open the buzzer, when have alert the device will sirens screaming
until "disarming".
8 Device Upgrading
Click device name - > Settings - > check device update: click on the new
version number,it will remind the new version number if have the new
version ,and the user can choose whether need upgrade
IV、software operation in PC
1 Download software in PC
1)Input http:http://163eye.cc in the PC explorer ,click the icon
Indice
