Dahua C series Manuale utente

Dahua C Series Home Camera Quick Start Guide

V 1.0.1

Dahua Technology CO., LTD

1

1Packing List

Device ×1 USB ×1

Power Adapter ×1 QSG ×1

Quick Installation Board ×1 Screw Package ×1

2

2Product Appearance

Figure 2-1 Figure 2-2 Figure 2-3

Please refer to the following sheet for more details about each port.

Sheet 2-1

Note:

For reset, long press for 8 seconds and then the light off; For WPS, one quick press.

Please refer to the following sheet for more details about status of indicator light.

Indicator light status

Device status

Red light normally on

Booting

Green light slow flashing

Booting completed, await wifi config, enter smart

config status;

Green light quick flashing

Wifi smart config in progress, including WPS,

management frame and etc.

Green light normally on

Wifi connection succeeded, operate normally.

Red and green lights flash

alternately

Device upgrade

Red light slow flashing

Network connection failure or disconnection after

network connection success.

Red light quick flashing

Device malfunction, fail to boot up; alarm or SD card

malfunction

Sheet 2-2

SN

Name

1

Speaker

2

Lens

3

IR LED

4

Indicator light

5

Microphone

6

USB power supply

7

Reset/WPS button

8

Micro SD Card Slot

3

3Operate by Easy4ip APP

1. Power on the device with power adapter.

2. Connect your smart phone to your WiFi network. Scan the “Easy4ip APP” QR on the packing box,

download and install the Easy4ip APP.

3. Open Easy4ipAPP (take IOS as an example), tap login to login theAPP, see Figure 3-1.

Figure 3-1

4. Tap “register”for first use.

4

Figure 3-2

5. Tap “+”to add devices.

Figure 3-3

6. Choose “Wireless”.

5

Figure 3-4

7. Name the camera and scan the QR code on camera.

6

Figure 3-5

8. Input the Wi-Fi password.

Figure 3-6

7

9. Waiting for 60s to finish the Wi-Fi connection.

Figure 3-7

Note: If you want to change the Wi-Fi signal, please reset the camera to factory default and repeat

step 6-9;

Figure 3-8

8

4Operate by DMSS APP

Step 1

Power on the camera.

Step 2

Connect iphone to a WiFi signal.

Step 3

Open DMSS (downloaded from APP Store), choose Device Manager.

Figure 4-1

Step 4

Click “+”.

9

Figure 4-2

Step 5

Choose “WiFi configuration”.

Figure 4-3

Step 6

Input a device name and scan the QR code on camera, then “next”.

Altri manuali per C series

6

Indice

Altri manuali Dahua Telecamera IP

Manuali Telecamera IP popolari di altre marche

FLIR

FLIR Exx series Manuale utente

Avigilon

Avigilon H4A-BO1-IR Manuale utente

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manuale utente

ShareTech

ShareTech AV1 Manuale utente

Ezviz

Ezviz C6C Manuale utente

Melchioni

Melchioni UCAM 2015 Manuale utente

Geutebruck

Geutebruck G-Cam/ESD-4630 Manuale utente

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manuale utente

Mitel

Mitel 6800i Series Manuale di servizio

Vitek

Vitek VTC-IR403-212NP Manuale utente

THOMSON

THOMSON DSC - 323W Manuale utente

AVer

AVer FB2027 Manuale utente

ENFORCER

ENFORCER EV-T5105-N2SQ Manuale utente

Wansview

Wansview NC543 Manuale utente

Eneo

Eneo MCB-64A0003M0A Manuale utente

deView electronics

deView electronics CBDNI36F Manuale utente

Swann

Swann SwannEye Manuale utente

LevelOne

LevelOne IP CamSecure Manuale utente