Dahua PFS4307-4ET-96 Manuale utente
Hardened Managed Switch
Quick Start Guide
V1.0.1
I
Foreword
General
This manual introduces the installation, functions and operations of the hardened managed switch
(hereinafter referred to as "the Device"). Read carefully before using the device, and keep the manual
safe for future reference.
Safety Instructions
The following signal words might appear in the manual.
Signal Words Meaning
Indicates a high potential hazard which, if not avoided, will result in
death or serious injury.
Indicates a medium or low potential hazard which, if not avoided,
could result in slight or moderate injury.
Indicates a potential risk which, if not avoided, could result in
property damage, data loss, reductions in performance, or
unpredictable results.
Provides methods to help you solve a problem or save you time.
Provides additional information as a supplement to the text.
Revision History
Version Revision Content Release Time
V1.0.1 Updated the description of the
introduction and the laser product. June 2022
V1.0.0 First release. February 2022
Privacy Protection Notice
As the device user or data controller, you might collect the personal data of others such as their face,
fingerprints, and license plate number. You need to be in compliance with your local privacy
protection laws and regulations to protect the legitimate rights and interests of other people by
implementing measures which include but are not limited: Providing clear and visible identification
to inform people of the existence of the surveillance area and provide required contact information.
About the Manual
●The manual is for reference only. Slight differences might be found between the manual and the
product.
●We are not liable for losses incurred due to operating the product in ways that are not in
compliance with the manual.
●The manual will be updated according to the latest laws and regulations of related jurisdictions.
For detailed information, see the paper user’s manual, use our CD-ROM, scan the QR code or visit
our official website. The manual is for reference only. Slight differences might be found between
the electronic version and the paper version.
II
●All designs and software are subject to change without prior written notice. Product updates
might result in some differences appearing between the actual product and the manual. Please
contact customer service for the latest program and supplementary documentation.
●There might be errors in the print or deviations in the description of the functions, operations
and technical data. If there is any doubt or dispute, we reserve the right of final explanation.
●Upgrade the reader software or try other mainstream reader software if the manual (in PDF
format) cannot be opened.
●All trademarks, registered trademarks and company names in the manual are properties of their
respective owners.
●Please visit our website, contact the supplier or customer service if any problems occur while
using the device.
●If there is any uncertainty or controversy, we reserve the right of final explanation.
III
Important Safeguards and Warnings
This section introduces content covering the proper handling of the device, hazard prevention, and
prevention of property damage. Read carefully before using the device, and comply with the
guidelines when using it.
Transportation Requirements
Transport the device under allowed humidity and temperature conditions.
Storage Requirements
Store the device under allowed humidity and temperature conditions.
Installation Requirements
●Do not connect the power adapter to the device while the adapter is powered on.
●Strictly comply with the local electrical safety code and standards. Make sure that the ambient
voltage is stable and meets the power supply requirements of the device.
●Personnel working at heights must take all necessary measures to ensure personal safety
including wearing a helmet and safety belts.
●Do not place the device in a place exposed to sunlight or near heat sources.
●Keep the device away from dampness, dust, and soot.
●Put the device in a well-ventilated place, and do not block its ventilation.
●Use an adapter or cabinet power supply provided by the manufacturer.
●The power supply must conform to the requirements of ES1 in IEC 62368-1 standard and be no
higher than PS2. Please note that the power supply requirements are subject to the device label.
●Do not connect the device to two or more kinds of power supplies, to avoid damage to the
device.
●The device is a class I electrical appliance. Make sure that the power supply of the device is
connected to a power socket with protective earthing.
●The device must be grounded by a copper wire with a cross-sectional area of 2.5 mm2and a
ground resistance no more than 4 Ω.
●Voltage stabilizer and lightning surge protector are optional depending on the actual power
supply on site and the ambient environment.
●To ensure heat dissipation, the gap between the device and the surrounding area should not be
less than 10 cm on the sides and 10 cm on top of the device.
●When installing the device, make sure that the power plug and appliance coupler can be easily
reached to cut off power.
IV
Operation Requirements
●Do not disassemble the device without professional instruction.
●Operate the device within the rated range of power input and output.
●Make sure that the power supply is correct before use.
●Make sure the device is powered off before disassembling wires to avoid personal injury
●Do not unplug the power cord on the side of the device while the adapter is powered on.
●Use the device under allowed humidity and temperature conditions.
●Do not drop or splash liquid onto the device, and make sure that there is no object filled with
liquid on the device to prevent liquid from flowing into it.
●Operating temperature: –30 °C (-22 °F) to +65 °C (+149 °F).
●This is a class A product. In a domestic environment this may cause radio interference in which
case you may be required to take adequate measures.
●Do not block the ventilator of the device with objects, such as a newspaper, table cloth or curtain.
●Do not place an open flame on the device, such as a lit candle.
Maintenance Requirements
●Power off the device before maintenance.
●Mark key components on the maintenance circuit diagram with warning signs.
V
Table of Contents
Foreword ........................................................................................................................................................................................................I
Important Safeguards and Warnings............................................................................................................................................ III
1 Overview................................................................................................................................................................................................... 1
1.1 Introduction ................................................................................................................................................................................. 1
1.2 Features..........................................................................................................................................................................................1
2 Port and Indicator ................................................................................................................................................................................ 2
2.1 Front Panel.................................................................................................................................................................................... 2
2.2 Side Panel ......................................................................................................................................................................................3
3 Installation...............................................................................................................................................................................................4
4 Wiring ......................................................................................................................................................................................................... 5
4.1 Connecting GND......................................................................................................................................................................... 5
4.2 Connecting Power Cord..........................................................................................................................................................5
4.3 Connecting SFP Ethernet Port............................................................................................................................................. 6
4.4 Connecting Ethernet Port......................................................................................................................................................8
4.5 Connecting PoE Port ................................................................................................................................................................8
5 Quick Operation.................................................................................................................................................................................... 9
5.1 Login through Web................................................................................................................................................................... 9
5.2 Restoring to Factory Settings.............................................................................................................................................. 9
Appendix Cybersecurity Recommendations............................................................................................................................10
1
1 Overview
1.1 Introduction
The product is a professional device. The Device is layer-2 hardened switch. Equipped with high
performance switching engine and large buffer memory, it features low transmission delay and high
reliability. The full-metal and fanless design and efficient surface heat dissipation enable it to work in
the environment from –30 °C (–22 °F) to +65 °C (+149°F). With web management and direct
connection to iLinksView, the Device can offer multiple working modes and meet different
requirements under different scenarios.
The Device is applicable for use in different scenarios, including corridors, factories and offices.
1.2 Features
●4 × 100 Mbps Ethernet ports, and 3 × 1000 Mbps uplink optical ports.
●All ports meet the requirements of IEEE802.3af and IEEE802.3at standards. The red ports also
conform to Hi-PoE and IEEE802.3bt standards.
●4 kV/CM, 2 kV/DM, lightning and surge protection.
●IEEE802.1Q-based VLAN configuration.
●250 m long-distance PoE transmission (10 Mbps).
●PoE watchdog.
●Fanless.
●Desktop mount and DIN-rail mount.
2
2 Port and Indicator
2.1 Front Panel
The following figures are for reference only, and might differ from the actual product.
Figure 2-1 Front panel
The following are all the ports and indicators on the front panel of the Device.
Table 2-1 Description of front panel
No. Description
1
Reset button.
Press and hold it for more than 5 s, and release after the panel status
indicators are all on to restore the Device to default settings.
2
Power Indicator.
●On: Power on.
●Off: Power off.
3
No. Description
3
Optical-port connection or data transmission status indicator (Link/Act).
●On: Connected to device.
●Off: Not connected to device.
●Flashes: Transmitting 1000 Mbps data.
4
Optical-port connection status indicator (Link).
●On: Connected to device.
●Off: Not connected to device.
5
Optical-port connection or data transmission status indicator (Link/Act).
●On: Connected to device.
●Off: Not connected to device.
●Flashes: Transmitting 1000 Mbps data.
6 10/100 Mbps adaptive PoE port.
7
Single-port connection or data transmission status indicator (Link/Act).
●On: Connected to device.
●Off: Not connected to device.
●Flashes: Transmitting data.
8
Single-port PoE status indicator.
●On: Powered by PoE.
●Off: Not powered by PoE.
2.2 Side Panel
The following figure is for reference only, and might differ from the actual product.
Figure 2-2 Side panel
Table 2-2 Port description
No. Description
1 Power port (dual power backup). Supports 48–57 VDC.
2 GND screw.
4
3 Installation
The Device supports DIN-rail mount. Hang the hook on the rail, press the Device to make the buckle
stuck into the rail.
The width of the guide rail supported by the Device is 50 mm.
Figure 3-1 DIN rail
Table 3-1 Component description
No. Description
1 Hook
2 Rail
3 Buckle
Altri manuali per PFS4307-4ET-96
1
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Dahua Interruttore
Dahua
Dahua D-PFS3110-8ET1GT1GF-96 Manuale utente
Dahua
Dahua PFS3006-4ET-36 Manuale utente
Dahua
Dahua DH-PFL2106-4ET-96 Manuale utente
Dahua
Dahua D-PFS4226-24ET-240 Manuale utente
Dahua
Dahua SG4028 Manuale utente
Dahua
Dahua C5-MDS Manuale utente
Dahua
Dahua PFS4307-4ET-96 Manuale utente
Dahua
Dahua DH-PFS3009-8ET-65 Manuale utente
Dahua
Dahua DH-PFS3010-8ET-96 Manuale utente
Dahua
Dahua D-PFS4226-24ET-240 Manuale utente
Dahua
Dahua VTNS1006A-2 Manuale utente
Dahua
Dahua D-PFS4226-24GT-230 Manuale utente
Dahua
Dahua PFS4226-24ET-240 Manuale utente
Dahua
Dahua DH-PFS4420-16GT-240 Manuale utente
Dahua
Dahua DH-PFM889 Series Guida all'installazione
Dahua
Dahua SERIES Manuale operativo e di manutenzione
Dahua
Dahua DH-PFS3008-8GT-96 Manuale utente
Dahua
Dahua 28DH-PFS4218-16ET-190-V3 Manuale utente
Dahua
Dahua DH-PFS4218-16GT-190 Manuale utente
Dahua
Dahua DH-PFS3125-24ET-190 Manuale utente
