Daikin TSTATD2152-2 Manuale utente

Owner's

Manual

TSTATD2152-2

RESIDENTIAL

for

Residential Use

Digital Thermostat

Heat Pump • 5+2 Day Programmable

Table of Contents

Safety Warnings ...................................................................3

Location of Controls.............................................................4

Dispay.....................................................................................5

Normal Operation

Manual Operation ..................................................................6

Programmed Operation...........................................................7

Aux Heat.................................................................................8

Clock Set................................................................................9

Time Period Programming

Overview ................................................................................................ 10

Weekday Programming........................................................................ 11

Weekend Programming........................................................................ 14

Advanced Setup...................................................................18

Advanced Features..............................................................19

Factory Defaults...................................................................20

Calibration ............................................................................21

Battery Replacement ..........................................................22

Warranty................................................................................23

The two Alkaline “AA” batteries must be replaced at

least once every 12 months to ensure proper operation.

The Low Battery icon (ﬁg. 1) will appear on the display

when it is time to replace the batteries. If the thermostat

is connected to 24v power, the batteries should still be

installed, but are not required.

When is displayed the batteries must be replaced

immediately. The manufacturer cannot be liable for

improper operation of the thermostat if the batteries are not

immediately replaced.

Annual battery replacement is especially critical in locations

subject to freezing temperatures. The thermostat will be

unable to turn on the heating system if the batteries are

exhausted.

This device complies with Part 15 of the FCC rules. Operation

is subject to the following two conditions: (1)This device may

not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause

undesired operation.

Follow Installation Instructions carefully.

DISCONNECT POWERTOTHE

HEATER - AIR CONDITIONER

BEFORE REMOVINGTHE OLD

THERMOSTAT AND INSTALLING

THE NEWTHERMOSTAT.

ﬁg. 1

Safety Warnings

Location of Controls

NEXT BUTTON

RESET FILTER

How to Use: Press and

hold the RESET FILTER

button to clear the

AUX HEAT

SWITCH

Emergency

Normal

Lockout

icon from the

display (pg 5). To adjust

when the icon

appears, see Advanced

Setup screens (pg 19).

FILTER

COOLER

RMER

BUT

TONS

PROGRAM SWITCH

RUN program

Program OFF

SET program

SET

HEAT

BATTERIES

COOL

OFF

PROGRAM

RUN OFF SET

RESET

FILTER

FAN

HEAT

AUX HEAT

NORM

EMRGC’Y LOCKOUT

AUTO

ON On or Auto

FAN SWITCH

For programming

How to use:The NEXT

button is used to advance

from one step to the next

in the programming and

advanced setup screens

(pgs 9 - 18).

BI-COLOR LED

Heat or Cool demand

indicator when system

powered: Red = Heat

Green = Cool

MODE

SWITCH

Cool, Off,

or Heat

Display

SET

MTuWThF

SaSu

PM MorningEvening

Day

Night AUX

HEAT

COOL

FILTER

12:00

1Day of the week. When programming, MTuWThF represent the

ﬁve weekdays and SaSu represent the two weekend days.

2Heat and Cool indicators. In normal operation, Heat or Cool

appears, depending on the Mode Switch position. When heat

or cool is energized, the Heat or Cool indicator will ﬂash.

3Clock Display.

4Time period indicators.These indicate the part of the

program that is currently active, if the Program Switch

is positioned to RUN.

5Desired set temperature.

6Current room temperature.

7Indicates that 2nd stage of heat is energized.

8Indicates when the ﬁlter should be serviced. Appears

after 0 - 1950 hours of blower operation (adjustable).

9Indicates batteries need replacement.

Normal Operation

1Select Cool or Heat with the Mode Switch.

2Normally leave the fan switched to Auto.

In Fan Auto, the fan will turn on only with a heat

or cool demand. When Fan On is selected, the fan will run

continuously.

3Adjust the desired set temperature with the

COOLER and WARMER buttons.

COOLER &

WARMER

BUTTONS

PROGRAM SWITCH

RUN program

Program OFF

SET program

SET

HEAT

BATTERIES

COOL

OFF

PROGRAM

RUN OFF SET

RESET

FILTER

FAN

HEAT

AUX HEAT

NORM

EMRGC’Y LOCKOUT

AUTO

On or Auto

FAN

SWITCH

MODE SWITCH

Cool, Off, or Heat

Manual Operation (Program Switch OFF)

Normal Operation

1Select Cool or Heat with the Mode Switch.

2Select RUN with the Program Switch.

3Normally leave the fan switched to Auto. In Fan Auto, the fan

will turn on only with a heat or cool demand. When Fan On is

selected, the fan will run continuously.

4The desired set temperature may be temporarily overridden.

The thermostat will revert to the programmed settings in the

following time period.

COOLER &

WARMER

BUTTONS

PROGRAM SWITCH

RUN program

Program OFF

SET program

SET

HEAT

BATTERIES

COOL

OFF

PROGRAM

RUN OFF SET

RESET

FILTER

FAN

HEAT

AUX HEAT

NORM

EMRGC’Y LOCKOUT

AUTO

On or Auto

FAN

SWITCH

MODE SWITCH

Cool, Off, or Heat

Programmed Operation

Aux Heat

SET

HEAT

BATTERIES

COOL

OFF

PROGRAM

RUN OFF SET

RESET

FILTER

FAN

HEAT

AUX HEAT

NORM

EMRGC’Y LOCKOUT

AUTO

AUX HEAT

SWITCH

Emergency - Disables all compressor functions* and energizes only Aux

Heat to satisfy the heat demand.

Normal - Aux Heat is allowed to run, if necessary, along with the heat

pump to satisfy the heat demand.

Lockout - Aux Heat will never turn on regardless of the heat demand.

* When the Aux Heat switch is in the Emergency position the compressor

will also be locked out during cooling operation.

PROGRAM

RUN OFF SET

Clock Set

Slide the Program Switch

to the SET position.

Setting the time & day are the ﬁrst two steps after sliding the Program

Switch to SET.

This thermostat is preprogrammed from the factory to operate

1 or 2-Stage equipment without the need for further programming.

To optimize the installation of this thermostat follow the instructions

in the Advanced Setup section.

To slew the time more rapidly, push and hold the

COOLER or WARMER buttons.

Use these buttons to

adjust the current time.

Use these buttons to

adjust the current day.

Press NEXT

to advance

Time Period Programming

Overview

• Slide the Program Switch to the SET position.

• The blinking icon(s) on the display may be

changed by pressing the COOLER or WARMER

buttons.

• After the blinking icon is changed to the desired

selection, press the NEXT button.

• Each item in the time period programming screens will ﬂash and can

be modiﬁed with the COOLER & WARMER buttons.

• Continue the steps above until programming is complete.

• Slide the Program Switch to RUN and the thermostat will run the time

period program.

• If the Program Switch is in the OFF position, the thermostat will not run

the time period program. In this case, the thermostat will be a manual

heat or cool only thermostat.

PROGRAM

RUN OFF SET

PROGRAM SWITCH

Indice

Altri manuali Daikin Termostato

Daikin

Daikin TSTATD2100-2 Istruzioni operative

Daikin

Daikin Home Controls EKRRVATR2BA Scheda informativa del prodotto

Daikin

Daikin 668811201 Istruzioni generali

Daikin

Daikin One+ Manuale utente

Daikin

Daikin ENVi Manuale utente

Daikin

Daikin homecontrols EKRCTRDI2BA Guida utente

Daikin

Daikin EKRTWA Manuale utente

Daikin

Daikin D2270C Istruzioni originali

Daikin

Daikin 910193131 Manuale utente

Daikin

Daikin MT 168 Manuale

Daikin

Daikin EKWCTRDI1V3 Manuale utente

Daikin

Daikin DKN509 Manuale utente

Daikin

Daikin BACnet IM 1234-1 Manuale

Daikin

Daikin MTB 158 Manuale

Daikin

Daikin One+ Manuale utente

Daikin

Daikin 668811101 Istruzioni generali

Daikin

Daikin TSTATD2200C-2 Istruzioni operative

Daikin

Daikin 910121748 Istruzioni generali

Daikin

Daikin One+ Istruzioni per il montaggio

Daikin

Daikin TSTATD4271C Manuale

Daikin

Daikin DZK-MTS-3 Manuale utente

Daikin

Daikin EKRTRB Manuale utente

Daikin

Daikin Airzone DZK-4 Manuale utente

Daikin

Daikin DT4273C Guida alla risoluzione dei problemi

Manuali Termostato popolari di altre marche

EWELLY

EWELLY EW-181 Manuale utente

Prolon

Prolon T1100 Istruzioni per l'installazione

Computherm

Computherm Q20 Manuale utente

Heatmiser

Heatmiser neoStat Manuale utente

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuale utente

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuale utente

Saswell

Saswell SAS920XWHB-7-S-RF Guida

Aircalo

Aircalo TFP1-ET85P2 Manuale utente

Honeywell

Honeywell CM721 Manuale utente

Carrier

Carrier DEBONAIR 33CS Manuale utente

Lennox

Lennox iHarmony Zone Thermostat Istruzioni per il montaggio

Gemtech

Gemtech GT7000 Manuale di istruzioni

Rollei

Rollei Smartes 45000 Manuale utente

Sinope

Sinope TH1300RF Manuale utente

Honeywell

Honeywell RLV4305 Manuale utente

Honeywell

Honeywell Prestige 2.0 THX9421 Manuale utente

NuTone

NuTone NTBZ48 Istruzioni operative originali

Stelpro

Stelpro MAESTRO ASMT402AD Manuale utente