Dali MS735MH Manuale utente
Quick Start Guide
MS735MH
Keys & Interfaces
Image
mode
Scene
mode
Palette
Figure 1 Main Interface
Low power
consumption mode
External
HDMI
Fog mode Wireless
Hot-spot
Zoom status Memory capacity
Battery level System Time
Figure 2 Bottom right status bar
Keys instruction
：
Power
Long press for 3 seconds to turn on/off the thermal imaging
camera, the green indicator light of the device is on after turning
on.
Short press for image correction, and press any key to wake up
after hibernation.
Menu
Long press to enter the main menu.
Short press to switch the image mode.
Photo
Short press to take photos.
Long press to record videos.
Up
Short press to switch between large and small field of view in IR,
short press to switch the fog mode in visible light.
Long press to zoom in under visible light, and increase focus
under IR/fusion.
Down
Short press to auto focus.
Long press to zoom out under visible light, and decrease focus
under IR/fusion.
Up + Down Key Combination +
Long press to turn on/off laser rangefinding.
Menu + Photo key combination +
Long press to turn on/off visible indication laser.
Figure 3 Menu Interface
Keys instruction
：
Menu
Short press to confirm/enter the next level menu.
Photo
Short press to return to the previous level menu.
Long press to return and exit the user menu.
Up
Short press to switch up/increase parameters.
Long press to quickly switch up/increase parameters.
Down
Short press to switch down/reduce parameters.
Long press to quickly switch down/reduce parameters.
Figure 4 Infrared menu interface
Hotspot tracking: After opening, the main interface will display a prompt for
the highest temperature on the screen
Scene mode: natural, enhanced, and highlighted to adapt to different weather
and scenes
Pseudo-color: 7 kinds of pseudo-color can be selected.
Contrast: Adjust the contrast of IR image
Brightness:Adjust the brightness of the infrared image.
Red display trigger value: Adjust the red display trigger value of infrared
images
Figure 5 Visible light menu interface
Visible Light Enable: Enable to use the function of visible light after opening
Contrast: Adjustable contrast of visible light, default to 128
Brightness:Adjustable brightness of visible light, default to 128
Figure 6 Shimmer menu interface
Shimmer Enable: when turned on, the image modes of Fusion and Shimmer
can be used
Figure 7 Positioning menu interface
Positioning Enable: When enabled, you can use positioning related functions.
Target Guidance: When it is turned on, it will display the target position in
the azimuth area of the main interface.
Target locking: When enabled, enter the target setting interface, after setting,
it can display the radar position of the target point in the main interface.
Coordinate system: Global positioning can be displayed in different
coordinate modes
Figure 8 Compass Menu Interface
Compass Enable: When enabled, compass related functions can be used.
Angle unit: You can switch different angle unit
Magnetic declination: manually set the local magnetic declination to increase
the accuracy of the compass.
Correction of azimuth, pitch, and roll angles: correct
minor deviations caused by environmental factors.
Magnetic field space calibration: Enter the compass calibration interface
Figure 9 Laser Ranging Menu Interface
Ranging Enable: When enabled, ranging-related functions can be used.
Target Positioning: When enabled, the coordinates of the target point will be
displayed in the upper right corner.
Target mode: Select the number of ranging targets
Gate Setting: After setting, the distance measurement results smaller than the
set value will be blocked.
Indice
Altri manuali Dali Binocolo
