Danby DPA100E1WDB Manuale utente

Thank you for purchasing a Danby air conditioner. Please

read this onwer’s manual carefully before using your new

air conditioner.

Remote Control Instructions

MODEL

AIR CONDITIONER

2016.12.08

DPA100E1BDB

DPA100E1WDB

DPA120E1BDB

DPA120E1WDB

Handling the Remote Control...............................................................................................................2

Remote Control Speciﬁcations............................................................................................................3

FunctionButtons...................................................................................................................................4

Indicators on LCD Display....................................................................................................................5

Cooling/FanSetting.............................................................................................................................5

DehumidiﬁerSetting..............................................................................................................................6

SwingSetting.........................................................................................................................................6

Timer Setting.........................................................................................................................................7

EconomySetting...................................................................................................................................8

CONTENTS

Handling the Remote Control

Location of the Remote Control

• Use the remote control within a distance of 7 m (23 ft.) from

the appliance, pointing it towards the receiver. Reception is

conﬁrmed by a beep.

CAUTION

• The air conditioner will not respond if curtains, doors or other materials block the signal from the

remote control to the unit.

• Prevent any liquid from contact with the remote control. Do not expose the remote control to direct

sunlight or heat.

• If the infrared signal receiver on the indoor unit is exposed to direct sunlight, the air conditioner may

not function properly. Use curtains to prevent the sunlight from falling on the receiver.

• If other electrical appliances react to the remote control, either move these appliances to another

location or consult your local dealer.

Replacing the Batteries

To replace the remote battery:

1. Use a screwdriver to remove the

screw that secures the battery

cover.

2. Push the latch to the right side

and pull the battery cover out.

3. Replace the battery and slide

the battery cover back into the

remote.

4. Replace the screw that secures

the battery cover.

CAUTION

• Do not mix old and new batteries or batteries of different types (if applicable).

• Do not leave the batteries in the remote control if it is not going to be used for more than 2 months.

• Dispose of the old batteries in special containers such as those found in the sales outlets.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital de-

vice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec-

tion against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encour-

aged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna

2. Increase the separation between the equipment and receiver

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is con-

nected

4. Consult the dealer or an experienced radio/TV technician for help

Changes or modiﬁcations not approved by the party responsible for FCC compliance could void the

user’s authority to operate the equipment.

This appliance complies with Part 15 of the FCC Rules. Operation is subject to the following condi-

tions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause unde-

sired operation.

This device complies with Canadian CAN ICES-3 (B) / NMB-3 (B)

Remote Control Speciﬁcations

Model Danby.00-UYKQ-46e (White) / Danby.01-UYKQ-46e(B) (Black)

Rated Voltage 3V

Signal Receiving Range 7m

Environment -5°C to 60°C (-41°F to 140°F)

Performance Feature

1. Operating Mode: COOL, DRY, and FAN.

2. Timer Setting Function in 24 hours.

3. Indoor Setting Temperature Range: 18°C~32°C (64°F~90°F).

NOTE: All the illustrations in this manual are for explanatory purposes only. Your air conditioner may

be slightly different.

Function Buttons

1. TEMP DOWN Button: Push this button to decrease the

indoor temperature setting by 1°C (1°F) increments to 18°C

(64°F).

2. TEMP UP Button: Push this button to increase the

indoor temperature setting by 1°C (1°F) increments to 32°C

(90°F).

3. M (Mode) Button: Each time the button is pressed, the op-

eration mode changes in the following sequence:

COOL DRY FAN

4. Button: Used to stop or start louver movement and

move the airﬂow direction up/down as desired.

5. Button: Unit operation starts when this button is

pressed and stops when the button is pressed again.

6. Button: Used to select the fan speed in 3 steps:

Maximum

Medium

Low

7. Button: Start Up Time: Press this button to activate the

Auto-on time setting. Each time it’s pressed will increase

the start up time. To cancel the Start up time setting, just

press the timer button again. Start Down Time : Press the

timer button to activate the start down setting. Each time it is

pressed, increases the start down time. To cancel the start

down setting, press the timer button again.

8. Button: Select this function if you want the unit to

maintain a comfortable setting and save energy while you

sleep. This function is available on COOL mode only.

9. Button: Press this button to change from °C to °F.

• With the unit in stand-by, press the “M” button for 20 sec-

onds to change from °C to °F.

• To change the unit from °C to °F, press the

▲

▲and

▼

but-

tons simultaneously.

Indicators on the LED

FAN SPEED Display

Displays the selected fan speed:

Maximum, Medium and Low.

How to use the Buttons

Cooling Operation

Ensure the unit is plugged in and has power.

1. Press the Mbutton to select COOL mode ( indicator will

appear).

2. Use the up and down arrows to select the desired tempera-

ture. The temperature can be set within a range of 18°C (64°F)

to 32°C (90°F) in 1°C (1°F) increments.

3. Press the button to select one of the 3 fan speeds, Maxi-

mum, medium and minimum.

Fan Operation

Ensure the unit is plugged in and has power.

1. Press the Mbutton to select FAN mode ( indicator will ap-

pear).

2. Press the button to select one of the 3 fan speeds, Maxi-

mum, medium and minimum.

NOTE

In FAN mode, the temperature setting is not displayed and you

are not able to control the room temperature either.

MODE Display

Displays the current selected mode.

Including COOL, DRY and FAN.

Temp./Timer Display

The temperature setting, from 18°C (64°F)

32°C (90°F) or the timer setting from 0 to

24 hours in one hour increments.

Temperature Symbol: Indicates if

temperature is in °C or °F

TIMER Display

This display area shows the

TIMER settings.

Dehumidifying Setting

Ensure the unit is plugged in and has power. The OPERATION

indicator on the display panel of the unit illuminates.

1. Press the M button until DRY mode is selected ( indicator

will appear).

2. Press the button to select one of the 3 fan speeds, Maxi-

mum, medium and minimum.

NOTE: You cannot set the temperature in dehumidifying mode.

Swing Setting

1. Use the button to adjust the direction the air blows in.

There are three deﬂector positions and the auto swing

feature.

Note: Under auto swing, the air ﬂow is continuously moving.

How to use the Buttons

Timer Setting

To set the start up time:

With the unit off:

1. Press the button, the time on the display will ﬂash.

2. Press the button until the time you desire shows on the

display. The timer can be set anywhere between 1 and 24

hours.

3. The display will stop ﬂashing and the time will be set.

4. To cancel press the button again.

To set the start down time:

With the unit on:

1. Press the button, the time on the display will ﬂash.

2. Press the button until the time you desire shows on the

display. The timer can be set anywhere between 1 and 24

hours.

3. The display will stop ﬂashing and the time will be set.

4. To cancel press the button again.

IMPORTANT

• The automatic operation time set by the remote control for the timer function is limited to 1 hour

increments up to 24 hours.

Example of Timer Operation

Start up (Auto-on Operation)

The Start up feature is useful when you want the unit to turn

on automatically, for example, right before you return home.

The air conditioner will automatically start operating at the

set time.

Example:

To start the air conditioner 6 hours ahead.

1. Press the button.

2. Keep pressing the button until it displays “06” on the

display.

TIMER ON

Start

Off

6 hours later

Set

Start down (Auto-off Operation)

The Start down feature is useful when you want the unit to

turn off automatically, for example, after you go to bed. The

air conditioner will stop automatically at the set time.

Example:

To turn off the air conditioner in 10 hours.

1. Press the button.

2. Keep pressing the button until it displays “10” on the

display.

TIMER OFF

Stop

Set 10 hours later

TIMER ON OFF

On Stop

2 hours later

after setting

Set

Start

10 hours later

after setting

CAUTION

• The timer setting must be cancelled before other settings can be applied.

ECONOMY (SLEEP) SETTING

When you press the button, the ECONOMY setting will be

activated.

The temperature setting will increase by 1°C (1°F) over the next

hour and by another 1°C (1°F) over another hour. This new

temperature will be maintained for the next several hours.

NOTE: The ECONOMY/SLEEP function is only available under

COOLING. The sleep function also dims the display.

How to use the Buttons

The design and speciﬁcations of this unit are subject to change without prior no-

tice for the purpose of product improvement. Consult the sales agency or manu-

facturer for details.

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali Danby Telecomando

Danby

Danby DPA120HB1WDB Manuale utente

Manuali Telecomando popolari di altre marche

Panasonic

Panasonic EUR7622KB0 Manuale utente

Bang & Olufsen

Bang & Olufsen Beo4 Manuale utente

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuale utente

Multiplex

Multiplex PROFI TX 9 Manuale utente

One Remote

One Remote RMB4 Manuale utente

FUTABA

FUTABA 9ZAP - PART2 Manuale utente

HR Matic

HR Matic HR MULTI 3 Manuale utente

Yamaha

Yamaha ACC-GNRST-30-20 Manuale utente

EisSound

EisSound KBSOUND Manuale utente

Marantz

Marantz RC101 Manuale utente

Conrad

Conrad FS20 TC6 Manuale utente

Anritsu

Anritsu MP1777A Manuale utente

Niles

Niles WVC100 Guida alla risoluzione dei problemi

RCA

RCA RCU1300 Manuale utente

Bang & Olufsen

Bang & Olufsen BEO6 Manuale utente

GE 94901 Manuale utente

Onbon

Onbon YQ1-75 Manuale utente

FUTABA

FUTABA R7108SB Istruzioni per l'installazione