Dancover GH16050 Manuale utente
27-04-2020
for
Lean-to Greenhouse
1,1x2x2,1m
Manual
1
Components
Pos. Cod. Description Q.ty
01
02
03
04
05
06
07
08
09
10
11
12
13
14
1685
1686
1698
1695
1697
2569
1758
6796
1689
1787
1688
/
/
1699
3-way joint
4-way joint
Tubular 197 cm
Tubular 95 cm
Tubular 157 cm
Sheet
Stake
Shading net
Clips
Base
Tip
Dowel ø 8
Screw for dowel ø 8
Tubular 11.5 cm
6
3
3
9
3
1
14
1
8
6
6
12
12
3
1- ASSEMBLING THE ROOF STRUCTURE (fig. A).
A- Mount the ridges of the roof. To mount the front and
rear ridge, use the 3-way joint Pos.01 while to mount the
central ridges use the 4-way joint Pos.02, fit the 95 cm
long tubulars (Pos.04a) into the slanted slots of the joints.
B- Connect the ridges to each other using nº 3 tubulars
95 cm long (Pos.04b) for each span.
02
fig. A 02
14
01
01
04a
04b
95 cm
95 cm
2
- MOUNT THE VERTICAL TUBES (fig. D).
A- Insert the tubularsPos. 05 and 03 into the roof.
03
05
fig. D
2
3
3- ASSEMBLY OF THE COLUMNS ON THE GROUND (fig. B).
A- Position the greenhouse in the point where you intend to mount it, having first flattened
the ground or in the case of grassy ground after having performed a very low grass cut.
Make sure that the size at the base of the pipes is the same as for the roof.
B- Contour the pipes at the base with sand, lime-white or other, or exert a good pressure
to obtain a markwhere to stick the tips Pos.11. Stick the tips with the aid of a tube: make
sure that the bayonet coupling pedicle is turned in the long side of the greenhouse as shown
in fig. B3; before this phase make sure that all the tubulars are completely inserted in
the joints.
fig. B
...ON THE GROUND
fig.B1
fig.
B3
fig.
B4
fig.
B5
11
10
Mark
4
- ASSEMBLY OF THE DOWELS ON THE FLOOR (fig. C).
A- Position the greenhouse in the point where you intend to mount it (fig. C).
Make sure that the size at the base of the pipes is the same as for the roof.
B- Contour the tubes with a marker or other tracer means (fig.C1) to outline the position
where to fix the basesPos.10; then after having traced and drilled the holes (fig.C2+C6) for
the dowelsPos.12 fix the basesin which to subsequently insert the tubularsPos.05; before
this phase make sure that all the tubulars are completely inserted in the joints.
fig. C
...ON THE FLOOR
12
13
fig.
C1
fig.
C3
fig.
C4
fig.
C6
4
5
5- COMPLETE THE ASSEMBLY OF THE STRUCTURE (fig. E).
A- Mount the roof over the vertical tubularsPos.05 so as to obtain the complete structure.
B- After assembly, check the external dimensions with those of the drawing.
It is important that the dimensions correspond to ensure correct assembly of the sheet.
fig. E
197 cm
110 cm
6
- MOUNTING THE SHEET (fig. F).
A- Open the sheet zipsand then drag the sheetPos.06 on the structure starting from one
side of the greenhouse as shown in the figure.
fig. F
06
6
7
7- ASSEMBLY OF THE COVER (fig. G).
A- Once the cap has been inserted, close the zips and arrange the sheet carefully.
B - Use the stakes Pos.07 to fix the sheet on the ground.
C- Cover the protruding part of the sheet with the soil making sure it is well stretched.
07
fig. G
(C) Cover with soil
the abundant sheet
(B) Close the zips
8
- ASSEMBLY OF THE SHADING NET (fig. H).
To keep the cultivated products longer, the greenhouse has been equipped with a shading
net that must be fixed under the roof of the greenhouse with the appropriate plastic clips
also supplied.
A- Insert the shading net Pos.08 between the greenhouse sheet and the roof tubulars and
fix it to the eaves tubular with the clips Pos.09.
08 Shading net
fig. H
(C) Cover with soil
the abundant sheet
(B) Close the zips
08 Shading net
09
8
Contact information
Head office:
Dancover A/S
Nordre Strandvej 119 G
3150 Hellebæk
Denmark
For more information
please visit:
www.dancovershop.com
National contact
Denmark: 70 26 76 20
denmark@dancover.com
UK: 020 8099 7570
uk@dancover.com
Spain: 911 436 828
espana@dancover.com
Italy: 02 479 21 198
italia@dancover.com
Germany: 041 0266 7040
germany@dancover.com
Switzerland: 0840 000125
schweiz@dancover.com
France: 0975 181 800
france@dancover.com
Austria: 0662 626935
austria@dancover.com
Sweden: 040 233 262
sverige@dancover.com
Finland: 0 931 581 720
suomi@dancover.com
Nederland: 0 858 880 524
nederland@dancover.com
Poland: 22 300 8602
polska@dancover.com
Ireland: 0 151 33 003
ireland@dancover.com
Luxembourg: +49 041 0266 7040
luxembourg@dancover.com
Portugal: 308 800 899
portugal@dancover.com
Belgium: 0 28 08 08 09
belgique@dancover.com
Norway: 231 00 690
norge@dancover.com
Indice
Altri manuali Dancover Kit serra
Dancover
Dancover LOTOS Manuale utente
Dancover
Dancover TITAN Classic Manuale utente
Dancover
Dancover GH97200 Manuale utente
Dancover
Dancover GH152100 Manuale utente
Dancover
Dancover Orangery Manuale utente
Dancover
Dancover ZEN 6.25M2 Manuale utente
Dancover
Dancover ARROW 3m Series Manuale utente
Dancover
Dancover GH152190 Manuale utente
Dancover
Dancover ASTRA GH120150 Manuale utente
Dancover
Dancover GH152190 Manuale utente
Dancover
Dancover Raised Bed 1x2m Manuale utente
Dancover
Dancover GH158040 Manuale utente
Dancover
Dancover Orangery GH152005 Manuale utente
Dancover
Dancover Polytunnel Greenhouse Manuale utente
Dancover
Dancover GH152015 Manuale utente
Dancover
Dancover STRONG Series Manuale utente
Dancover
Dancover 2m Series Manuale utente
Dancover
Dancover GH21100 Manuale utente
Dancover
Dancover Mini Greenhouse GH152170 Manuale utente
Dancover
Dancover Polytunnel Greenhouse 3x6m Manuale utente
