Danfoss 176F7300 Manuale utente
VLT®MICRO
Danfoss can accept no responsibility for possible errors in catalogs, brochures and other printed material. Danfoss reserves the right
to alter its products without notice. This also applies to products already on order provided that such alterations can be made
without subsequential changes being necessary in specifications already agreed.
Table of Contents
Chapter 1 Introduction
Getting Started ................................................................................. 1
Receiving, Inspection, and Storage ................................................... 2
Nameplate Information ..................................................................... 2
General Technical Data ..................................................................... 3
Specifications ................................................................................... 6
External Parts and Labels ................................................................. 7
Chapter 2 Installation and Wiring
Installation Requirements .................................................................. 8
Wiring ............................................................................................... 9
Main Circuit Standard Wiring Chart ................................................. 10
Control Terminal Designations (Factory Settings) ............................. 11
Safety Precautions .......................................................................... 12
Chapter 3 Digital Keypad/Display Operation
Digital Keypad/Display Features...................................................... 14
Quick Set-up .................................................................................. 16
Operation ....................................................................................... 18
Chapter 4 Description of Parameters .............................................................. 20
Chapter 5 Summary of Parameters ................................................................. 62
Chapter 6 Troubleshooting and Fault Information ............................................ 69
Appendix A Dimensions ..................................................................................... 73
Appendix B Accessories .................................................................................... 75
Appendix C CE Labeling .................................................................................... 77
Appendix D Serial Communication ..................................................................... 82
Document Version Number 3.10
Software Version 1.06
VLT is a registered Danfoss trade mark
VLT®MICRO
VLT®MICRO
Chapter 1
Introduction
Congratulations on your purchase of a VLT®Adjustable Frequency Drive. The VLT®
MICRO is a high-performance / low noise general-purpose drive, manufactured using
the highest quality components and incorporating the latest micro-processor technology
and control algorithms.
The purpose of this chapter is to provide specific yet simple information to unpack,
install, and operate the drive. This chapter contains information on the following:
• Getting Started
• Unpacking, Inspection, and Storage
• Nameplate Information
• Identification of Parts
Getting Started
This manual will help in the installation, parameter setting, troubleshooting, and daily
maintenance of the AC drive. To guarantee safe operation of the equipment, read the
following safety guidelines before connecting the Adjustable Frequency Drive to AC
Power.
The VLT Adjustable Frequency Drive (AFD) contains dangerous voltages
when connected to line voltage. After disconnecting from the line wait at
least one minute before touching any electrical components. Also make
sure that other voltage inputs have been disconnected, such as external 24
VDC, load-sharing (linkage of DC intermediate circuit), as well as the motor
connection for kinetic back-up. Only a competent electrician should carry
out the electrical installation. Improper installation of the motor or the AFD
may cause equipment failure, serious injury or death. Follow this manual,
National Electrical Codes (NEC®) and local safety codes.
Electrostatic Precaution; Electrostatic discharge (ESD). Many electronic
components are sensitive to static electricity. Voltages so low that they
cannot be felt, seen or heard, can reduce the life, affect performance, or
completely destroy sensitive electronic components. When performing
service, proper ESD equipment should be used to prevent possible damage
from occurring.
It is the responsibility of the user or the person installing the AFD to provide
proper grounding, as well as motor overload and branch circuit protection
according to the National Electrical Code (NEC®) and local codes.
WARNING
WARNING
CAUTION
1
VLT®MICRO
Receiving,Transporting, Inspecting, and Storage
This VLT®MICRO Adjustable Frequency Drive has gone through rigorous quality control
tests at the factory before shipment. After receiving and before transporting the drive,
check for the following.
Receipt
After receiving the AC drive, inspect the unit to insure it was not damaged during
shipment.
Transportation
Climatic condition : Class 2K3
Inspection
• After unpacking the unit, make sure that the package includes a drive unit and the
Instruction Manual.
• Make sure that the part number indicated on the nameplate and packing carton
corresponds with the part number of your order.
Storage
The AFD should be kept in the shipping carton before installation. In order to retain the
warranty coverage, the drive should be stored properly. Some storage
recommendations are:
• Store in a clean, dry place
• Store within an ambient temperature range of -20°C to +65°C
• If possible, store in an air-conditioned evironment where the relative humidity is less
than 95%, non-condensing.
• Do not store the unit in places where it could be exposed to corrosive gases.
• Do not store the unit on an unstable surface where it could be damaged by falling to
the floor.
Nameplate Information
Example for 1HP 240V AC Adjustable Frequency Drives
Description of Serial Number
1234 01 H 260
Production date:
week, year
Place of production
Series number
Serial number
MODEL : 176F7304 S. N. 123401H260
INPUT : 3PH 200-240V 50/60 Hz 6.3A
OUTPUT : 3PH 0-240V 5.0A 1.9KVA 1HP
Freq. Range: 0.1-400Hz
Model, Serial Number
Input Spec.
Output Spec.
Freq. Range
Tracking number
Part Numbers:
1/2HP 230V single phase 176F7300
1HP 230V single phase 176F7301
2HP 230V single phase 176F7302
1/2HP 230V three phase 176F7303
1HP 230V three phase 176F7304
2HP 230V three phase 176F7305
1/2HP 230V single phase CE 176F7306
1HP 230V single phase CE 176F7307
2HP 230V single phase CE 176F7308
2
VLT®MICRO
General Technical Data
AC line supply (L1, L2, L3):
Supply voltage 200-240 V units ............................ 1 x 200/208/220/230/240 V ±10%
Supply voltage 200-240 V units ............................ 3 x 200/208/220/230/240 V ±10%
Supply frequency .......................................................................................... 50/60 Hz
Max. imbalance of supply voltage .................................... ±2% of rated supply voltage
Power factor/cos ϕ ............................................................................0.90/1.0 at rated load
Max short circuit rating ..................................................................................... 5000 A
VLT output data (U, V, W):
Output voltage ..................................................................... 0-100% of supply voltage
Output frequency..................................................................................... 0.1 - 400 Hz
Rated motor voltage, 200-240 V units ................................... 200/208/220/230/240 V
Rated motor frequency ................................................................................. 50/60 Hz
Switching on output...................................................................................... Protected
Ramp times ............................................................................................. 0.1-600 sec.
Torque characteristics:
Starting torque.................................................................................... 150% for 1 min.
Acceleration torque ............................................................................................ 100%
Overload torque, 200-240 V ............................................................... 150% for 1 min.
Control card, digital inputs:
Number of programmable digital inputs ..................................................................... 6
Terminal nos. ....................................................................... M0, M1, M2, M3, M4, M5
3
VLT®MICRO
Control card, analog inputs:
No. of programmable analog inputs (selectable voltage or current) ............................ 1
Terminal numbers ................................................................................................. AV 1
Voltage level .............................................................................................. 0 - 10 VDC
Input resistance, Ri.......................................................................................................................................... approx. 47 kΩ
Current range ................................................................................................ 4-20 mA
Input resistance, Ri.......................................................................................................................................... approx. 250 Ω
Resolution ................................................................................................ 10 bit + sign
Galvanic isolation: All analog inputs are galvanically isolated from the supply voltage.
Control card, 10 VDC supply:
Terminal numbers ................................................................................................ +10V
Max. load .......................................................................................................... 10 mA
Control card, analog outputs:
Number of programmable analog outputs ................................................................. 1
Terminal numbers ................................................................................................. AFM
Voltage range at analog output .................................................................. 0 - 10 VDC
Galvanic isolation: All analog outputs are galvanically isolated from the supply voltage.
PHC output
Number of programmable photocoupler outputs ....................................................... 1
Terminal numbers ...................................................................................... MO1-MCM
Max. output ...................................................................................... -48 VDC, 50 mA
Control card, RS485 serial communication:
Terminal numbers .............................................................................................. RJ-11
4
VLT®MICRO
5
Relay outputs:
No. of programmable relay outputs ........................................................................... 1
Terminal numbers .............................................. RA, RC (N.O.) RB, RC (N.C.) (Form C)
Max. terminal load rating ........................................................... 120 VAC/28 VDC, 5 A
........................................................................................................... 240 VAC, 2.5 A
Brake resistor terminals:
Terminal numbers ............................................................................................. B1, B2
Cable lengths and cross-sections:
Use 75°C copper wire minimum
Max. motor cable length ...................................................................................... 50 m
Max. cable cross-section for line, motor and brake ......................... 14 AWG (2.0 mm2)
Max. cable cross-section for control terminals ................................ 14 AWG (2.0 mm2)
Control characteristics:
Frequency range ..................................................................................... 0.1 - 400 Hz
Resolution on output frequency .......................................................................±0.1 Hz
Speed, control range (open loop) ............................................. 1:20 of synchro. speed
Speed, accuracy (open loop) ............................................. < 1800 rpm: max. error 2%
......................................................... > 1800 rpm: max. error of 0.5% of actual speed
Environment:
Enclosure .............................................................................. Protected chassis (IP20)
Vibration test ...................................................... 1.0 g less than 20Hz, 0.6 g 20-50Hz
Max. relative humidity ................................................ less than 90% (non-condensing)
Ambient temperature ............................................................................ –10°C - +50°C
Temperature during storage/transport ....................................................... –20 - +60°C
Max. altitude above sea level ............................................................ 3300 ft. (1000 m)
VLT®MICRO
6
AC Line 1Ø and 3Ø, 200 - 240 Volt
VLVL
VLVL
VLT OrT Or
T OrT Or
T Order Number 1Øder Number 1Ø
der Number 1Øder Number 1Ø
der Number 1Ø 176F7300176F7300
176F7300176F7300
176F7300 176F7301176F7301
176F7301176F7301
176F7301 176F7302176F7302
176F7302176F7302
176F7302
3Ø3Ø
3Ø3Ø
3Ø 176F7303176F7303
176F7303176F7303
176F7303 176F7304176F7304
176F7304176F7304
176F7304 176F7305176F7305
176F7305176F7305
176F7305
1Ø CE1Ø CE
1Ø CE1Ø CE
1Ø CE 176F7306176F7306
176F7306176F7306
176F7306 176F7307176F7307
176F7307176F7307
176F7307 176F7308176F7308
176F7308176F7308
176F7308
Output current
continuous (200-240) [A] 2.5 5.0 7.0
intermittent (200-240) [A] 3.7 7.5 10.5
Output
continuous (200-240) [KVA] 1.0 1.9 2.7
Typical shaft output [HP] 0.5 1.0 2.0
[kW] 0.4 0.75 1.5
Max. motor cable size [AWG] 14 14 14
[mm2]222
Max. input current 1Ø, 200-240 [A] 6.3 11.5 15.7
3Ø, 200-240 [A] 2.9 6.3 8.8
Max. power cable size [AWG] 14 14 14
[mm2]222
Max. pre-fuses 1) 1Ø [A] 10 20 25
3Ø [A] 10 20 25
Enclosure Chassis (IP20)
Weight 1Ø [lbs.] 1.75 2.0 2.25
3Ø [lbs.] 1.75 1.75 2.0
1) 200-240 VAC; Bussmann type JJN or exact equivalent
Specifications
VLT®MICRO
1: Mounting screw holes
2: Nameplate label
3: Bottom cover
4: Digital keypad
5: Upper cover
6: Ventilation hole
7: Input terminals
8: External input/output
terminals
9: B1, B2 External brake
resistor terminals
10: U, V, W Output terminals
7
7
8
9
10
U V W B1 B2
R S T
5
4
3
61
2
VLT®MICRO
Air
Flow
5 in.
(120mm)
min.
5 in.
(120mm)
min.
2 in.
(50mm)
min.
2 in.
(50mm)
min.
Chapter 2
Installation and Wiring
Chapter 2 provides the information needed to properly install and wire the AC motor
drive. Make sure that the AC drive is wired according to the instructions contained in
this chapter. The instructions should be read and understood before the actual
installation begins. This chapter contains the following information:
• Installation Requirements
• Wiring
Installation Requirements
Install the drive vertically to provide proper ventilation. Adequate space is required
between the drive and a wall or other equipment. The figure below shows the minimum
space needed.
The AC motor drive should be installed in an environment that is:
• protected from rain or moisture
• protected from direct sunlight
• protected from corrosive gases or liquids
• free from airborne dust or metallic particles
• free from vibration
• free from magnetic noise
• Climate condition : Class 3K3 (temperature between -10°C to 50°C, Operation
above 40°C requires good ventilation to avoid over-heating.)
6 in
(150mm)
min.
6 in
(150mm)
min.
8
Questo manuale è adatto per i seguenti modelli
8
Indice
Altri manuali Danfoss Controllori
Danfoss
Danfoss AME 55 Manuale utente
Danfoss
Danfoss PLUS+1 SC0XX-1 Series Manuale
Danfoss
Danfoss VLT MCD 600 Manuale utente
Danfoss
Danfoss AMD 610 AS Manuale utente
Danfoss
Danfoss ADAP-KOOL Drive Manuale utente
Danfoss
Danfoss VLT Micro Drive FC 51 Series Istruzioni operative
Danfoss
Danfoss VLT 5000 Series Manuale utente
Danfoss
Danfoss Link HC Manuale utente
Danfoss
Danfoss ECL Comfort 310 Manuale utente
Danfoss
Danfoss FT1555-BM Manuale utente
Danfoss
Danfoss VLT Compact Starter MCD 201 Manuale utente
Danfoss
Danfoss VLT Micro Drive Manuale utente
Danfoss
Danfoss AME 410 Manuale utente
Danfoss
Danfoss VLT MCD 600 Manuale utente
Danfoss
Danfoss VLT DMS 300 Manuale utente
Danfoss
Danfoss ECL Comfort 310 Manuale utente
Danfoss
Danfoss SH-E01 Manuale utente
Danfoss
Danfoss VLT MCD 200 Manuale utente
Danfoss
Danfoss A333 Series Manuale di istruzioni per l'installazione
Danfoss
Danfoss PVED-CLS Manuale utente
