Danfoss ICAD Series Manuale utente

027R9776

027R9776

© Danfoss | DCS (ms) | 2020.01 AN331637222900en-000101 | 1

Installation Guide

ICAD Actuators

Mechanical installation of ICAD on ICM

Included in the ICAD box:

New EPDM O-ring New PTFE ring Molycote 55 grease

1. Remove existing O-ring and PTFE ring* on the ICM adapter with your ﬁngers.

Do not use any tool because it may damage the O-ring/PTFE ring

2. Install the new PTFE ring*

3. Apply Molycote 55 grease in groove below o-ring

4. Apply Molycote 55 grease on the EPDM O-ring

5. Install the new EPDM O-ring in groove

6. Observe that Molycote 55 grease is distributed, in the groove,

all around the ICM adapter

7. Apply a very thin ﬁlm of Molycote 55 around and on the ICAD magnets

8. Turn all 3 set screws about 3 turns clockwise

and then counterclockwise back to its original

position

O-ring

PTFE ring

Groove where ICAD

set screws are fastend

This Installation guide cover installation of ICAD

•on complete new ICM top part (function module)

•on ICM top part already in operation

*If the ICM top part is new there is no need to replace PTFE ring

Clockwise Counterclockwise

ICM bonnet

© Danfoss | DCS (ms) | 2020.012 | AN331637222900en-000101

4.

Install the ICAD actuator on the ICM adapter making sure it is pushed

completely down. Fasten the the 3 set screws using a 2.5 mm hexagon key.

Note!

Crosstighthen all 3 screws to ensure equal tightening.

Max 3 Nm torque.

For ICM in operation

When ICAD is in

stalled/serviced, on a cold/frozen valve; do the following:

1.

Make sure the old grease is totally removed before mounting a new EPDM

O-ring and PTFE support ring.

2.

If there is any ice or moisture present, it must be removed prior to applying

the grease.The ice/moisture can be removed with an electrical hot air gun.

3.

After ice removal by heater, ensure that the ICM adapter is totally dry before

mounting new EPDM O-ring and PTFE support ring

Indice

Altri manuali Danfoss Controllori

Danfoss

Danfoss EKC 202C-MS Manuale utente

Danfoss

Danfoss ECL Comfort 210 Manuale di istruzioni per l'installazione

Danfoss

Danfoss ADAP-KOOL AK-PC 783 Guida

Danfoss

Danfoss AMV 410 Manuale utente

Danfoss

Danfoss ECL Comfort 300 Manuale utente

Danfoss

Danfoss VLTAutomationDrive FC 360 Manuale utente

Danfoss

Danfoss FH-WC Manuale utente

Danfoss

Danfoss 176F7300 Manuale utente

Danfoss

Danfoss VLT MCD 200 Manuale utente

Danfoss

Danfoss EFIT 850 Manuale utente

Danfoss

Danfoss AK-SM 800 Manuale utente

Danfoss

Danfoss VLT HVAC Drive FC 102 Manuale utente

Danfoss

Danfoss AFD 2 VFG 221 Manuale utente

Danfoss

Danfoss AME 55 Manuale utente

Danfoss

Danfoss AK-CC55 Manuale utente

Danfoss

Danfoss RAVK Manuale utente

Danfoss

Danfoss VFQ 2 Manuale utente

Danfoss

Danfoss AK-CC 550A Manuale utente

Danfoss

Danfoss ECL Comfort 301 Manuale utente

Danfoss

Danfoss VTL MCD 203 Series Manuale utente

Danfoss

Danfoss TERMIX PM2+P Manuale utente

Danfoss

Danfoss VLT Soft Starter MCD 600 Manuale utente

Danfoss

Danfoss MCD Series Manuale utente

Danfoss

Danfoss ADAP-KOOL AK-PC 551 Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente