Danfoss VLT MCD 201 Manuale utente

Installation Guide

EtherNet/IP Module

VLT® Compact Starter MCD201/MCD 202 and VLT® Soft Starter MCD 500

1.1

1.2

2.1

2.2

2.3

2.4

3.1

4.1

4.2

4.2.1

4.2.2

4.2.3

4.3

4.4

5.1

5.2

5.3

5.3.1

5.3.2

5.3.2.1

5.3.2.2

5.3.3

5.3.4

5.3.4.1

5.3.4.2

5.4

5.4.1

6.1

Contents

Safety 6

Disclaimer 6

Warnings 6

Introduction 7

Product Design 7

Compatibility 7

Product Versions 7

Network Connection 7

Installation 9

Installing the Communication Module 9

Connection 11

Soft Starter Connection 11

Network Connection 11

Ethernet Ports 11

Cables 11

EMC Precautions 12

Network Establishment 12

Addressing 12

Device Configuration 13

Before Configuring the Device 13

Configuration Methods 13

On-board Web Server 13

Connect to the Device 13

Manage Users and Passwords 14

Adding a User 15

Deleting a User 15

Configuring the IP Address 16

Configure IoT Settings 16

Configuring MQTT Settings 17

Configuring OPC UA Settings 18

Scanning the Network 18

Identifying the Device with Ethernet Device Configuration Tool 19

Scanner Configuration 20

EDS File 20

Contents

EtherNet/IP Module

Installation Guide

6.2

7.1

7.2

7.3

7.4

7.5

8.1

8.2

8.2.1

8.2.2

8.2.2.1

8.2.2.2

8.2.2.3

8.2.3

8.2.3.1

8.2.3.2

8.2.3.3

8.2.3.4

8.2.3.5

8.3

8.3.1

8.3.2

8.3.2.1

8.3.2.2

8.3.2.3

8.3.3

8.3.3.1

8.3.3.2

8.4

9.1

9.2

9.3

9.4

Assembly Objects 20

Operation 21

Requirements for Successful Operation 21

Device Classification 21

Enabling Network Control 21

Ensuring Safe and Successful Control 21

Feedback LEDs 21

Packet Structures 23

Important Information 23

Implicit Messaging (Cyclic Operation) 23

Assembly Objects 20

Control Commands (Assembly Instance 104d) 23

Bytes 0–1: Command 23

Bytes 2–3: Reserved 23

Command Examples 24

Status Information (Assembly Instance 154d) 24

Bytes 0–1: Starter State 24

Bytes 2–3: Reserved 25

Bytes 4–7: Motor Current 25

Bytes 8–9: Trip Code 25

Bytes 10–11: Reserved 25

Explicit Messaging (Acyclic Operation) 25

Identity Object (Class 0x01) 25

Vendor-specific Objects 26

Class 100 ~ 102 Objects (Read/Write) 26

Class 103 Objects (Read Only) 26

Class 104 Objects (Read Only) 28

Supported Services for Vendor-specific Objects 28

Service Codes for Acyclic Operation 28

Status Codes for Acyclic Services 29

Trip Codes 29

Network Design 31

Star Topology 31

Line Topology 31

Ring Topology 32

Combined Topologies 32

Contents

EtherNet/IP Module

Installation Guide

10.1

10.2

10.3

10.4

10.5

10.6

Specifications 34

Enclosure 34

Mounting 34

Connections 34

Network 34

Power 34

Certification 34

Contents

EtherNet/IP Module

Installation Guide

1 Safety

1.1 Disclaimer

The examples and diagrams in this manual are included solely for illustrative purposes. The information contained in this manual is

subject to change at any time and without prior notice. Responsibility or liability is never accepted for direct, indirect, or consequen-

tial damage resulting from the use or application of this equipment.

1.2 Warnings

WARNING

SHOCK HAZARD

Attaching or removing accessories while the soft starter is connected to mains voltage may cause personal injury.

Before attaching or removing accessories, isolate the soft starter from mains voltage.

WARNING

RISK OF PERSONAL INJURY AND EQUIPMENT DAMAGE

Inserting foreign objects or touching the inside of the soft starter while the expansion port cover is open may endanger person-

nel and can damage the soft starter.

Do not insert foreign objects in the soft starter with the port cover open.

Do not touch the inside of the soft starter with the port cover open.

Safety

EtherNet/IP Module

Installation Guide

•

2 Introduction

2.1 Product Design

The EtherNet/IP module allows the soft starter to connect to an Ethernet network and be controlled or monitored using an Ethernet

communication model.

Familiarity with Ethernet protocols and networks is required to operate the device successfully. For difficulties arising from using

this device with 3rd-party products, including PLCs, scanners, and commissioning tools, contact the relevant supplier.

2.2 Compatibility

The EtherNet/IP Module is compatible with the following Danfoss soft starters:

MCD 200 - 24 V AC/V DC and 110/240 V AC control voltage.

MCD 500 - all models.

2.3 Product Versions

The MCD EtherNet/IP module is available in 2 different versions. The part number is printed on the label on the side of the module.

175G9906 MCD EtherNet/IP module

Monitor and control the soft starter over an EtherNet/IP connection.

175G9907 MCD EtherNet/IP module

Monitor and control the soft starter over an EtherNet/IP connection.

Monitor and control the soft starter over a TCP connection using VLT® Motion Control Tool MCT 10, refer to the VLT® Motion

Control Tool MCT 10 Operating Guide.

Monitor the soft starter over an IoT connection.

This installation guide is suitable for use with 175G9907. For the manual for 175G9906, contact the local supplier.

2.4 Network Connection

Table 1: Supported Protocols

Protocols

EtherNet/IP

Industrial Ethernet via EtherNet/IP

TCP

Transmission control protocol to connect to port 4000 of a PC

MQTT

Message queue telemetry transport

OPC UA

Open platform communications unified architecture

Introduction

EtherNet/IP Module

Installation Guide

4/T2

READY RUN TRIP LOCAL

Exit

Reset

Store

2/T1 6/T3

1/L1 3/L2

5/L3

VLT

Soft Starter

e77ha805.10

Illustration 1: Overview of Network Connections

Soft starter

Network switch

IoT connection (MQTT/OPC UA)

Industrial Ethernet connection to programmable

logic controller

TCP connection to VLT® Motion Control Tool MCT

10. Refer to the VLT® Motion Control Tool MCT 10

Operating Guide for connection details.

Introduction

EtherNet/IP Module

Installation Guide

3 Installation

3.1 Installing the Communication Module

CAUTION

EQUIPMENT DAMAGE

If mains and control voltage are applied when installing or removing options/accessories, it may damage the equipment.

Remove mains and control voltage from the soft starter before installing or removing options/accessories.

Procedure

Remove control power and mains supply from the soft starter.

Fully pull the top and bottom retaining clips on the module.

e77ha833.10

Installation

EtherNet/IP Module

Installation Guide

Line up the module with the comms port slot.

e77ha834.10

Push in the top and bottom retaining clips to secure the module to the soft starter.

e77ha835.10

Connect Ethernet Port 1 or Port 2 on the EtherNet/IP module to the network.

Apply control power to the soft starter.

Installation

EtherNet/IP Module

Installation Guide

Altri manuali per VLT MCD 201

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Danfoss Controllori

Danfoss

Danfoss EKC 347 Manuale utente

Danfoss

Danfoss CCR2 Manuale utente

Danfoss

Danfoss PN 25 Manuale utente

Danfoss

Danfoss VLT AQUA Drive FC 200 Manuale utente

Danfoss

Danfoss TWA-Z Manuale utente

Danfoss

Danfoss AK-SC255 Manuale utente

Danfoss

Danfoss ICAD 600B Manuale utente

Danfoss

Danfoss KP 15A Manuale utente

Danfoss

Danfoss Optyma Plus OP-MPS Manuale utente

Danfoss

Danfoss Icon Series Manuale utente

Danfoss

Danfoss 101N0715 Manuale utente

Danfoss

Danfoss AFD 2 VFG 221 Manuale utente

Danfoss

Danfoss AK-CC55 Manuale utente

Danfoss

Danfoss VLT HVAC Drive FC 102 Guida

Danfoss

Danfoss PLUS+1 Series Manuale

Danfoss

Danfoss A333 Series Manuale di istruzioni per l'installazione

Danfoss

Danfoss ECL Comfort 310 Manuale di istruzioni per l'installazione

Danfoss

Danfoss VLT MCD 600 Manuale utente

Danfoss

Danfoss RT 5 Manuale utente

Danfoss

Danfoss 140F1089 Manuale utente

Danfoss

Danfoss VLT Micro Drive Manuale utente

Danfoss

Danfoss 088U0200 Manuale utente

Danfoss

Danfoss VLT FC Series Manuale utente

Danfoss

Danfoss VLT HVAC Drive FC 102 Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente