Danfoss CF-RS Manuale utente
088U0210
Instruction CF-RS Standard Room Thermostat
Anleitung CF-RS Raumthermostat (standard)
Vejledning CF-RS Standardrumtermostat
Instruction CF-RS Thermostat standard
2VI.UH.L1.52 Produced by Danfoss Floor Heating Hydronics 08.2008
Instruction CF-RS Standard Room Thermostat
Instruction .......................3
Anleitung .......................14
Vejledning.......................24
Instruction ......................34
3VI.UH.L1.52 Produced by Danfoss Floor Heating Hydronics 08.2008
Instruction CF-RS Standard Room Thermostat
1. Functional Overview. . . . . . . . . . . . . . . . . . 4
2.Installation........................... 6
3. Transmission Test . . . . . . . . . . . . . . . . . . . . . 8
4.Mounting ............................ 9
5.Uninstallation ........................ 10
6.Specications ........................ 11
7. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . 12
8. Figures and illustrations. . . . . . . . . . . . . . . 44
Index
4VI.UH.L1.52 Produced by Danfoss Floor Heating Hydronics 08.2008
Instruction CF-RS Standard Room Thermostat
Front - g. 1
Turning knob & push button
Red LED (behind the cover)
LED modes
• Permanent light ON
• No light OFF
• Slow ashing Flashes
• Fast ashing Flickers
Back - g. 2
Back plate
Turning knob release
Back plate lock/unlock (turn 90°)
Screw hole for wall mounting
Battery placement
Screw and wall plug
Note: To activate batteries please remove enclosed
strips from batteries
1. Functional Overview
5VI.UH.L1.52 Produced by Danfoss Floor Heating Hydronics 08.2008
Instruction CF-RS Standard Room Thermostat
Turning Knob - g. 3
Turning knob release
Room temperature limitation - g. 4
Minimum limitation (blue) (from 10°C)
Maximum limitation (red) (up to 30°C)
6VI.UH.L1.52 Produced by Danfoss Floor Heating Hydronics 08.2008
Instruction CF-RS Standard Room Thermostat
Note:
• To activate batteries in the Room Thermostat
please remove enclosed strips from the batteries
• The assignment of the Room Thermostats to the
Master Controller should be within 1½m distance
Activate Install mode on
Master Controller - g. 1
• Use the menu selection button to select the
Install mode. Install LED ashes
• Activate Install mode by pressing OK . Install
LED goes ON
Activate Install mode on
Room Thermostat
• Press the push button . LED and icker
during communication
Select output on Master Controller
• All available output LEDs on Master Controller
light up, and the rst of them ashes
• Press output selection button , select desired
output (ashes) and accept with OK
• All output LEDs go OFF. Selected output
stays ON shortly
2. Installation
7VI.UH.L1.52 Produced by Danfoss Floor Heating Hydronics 08.2008
Instruction CF-RS Standard Room Thermostat
Room Thermostat installation status
• Satisfactory - LED goes OFF
• Not satisfactory - LED ashes 5 times
Note: A Room Thermostat can be assigned to sev-
eral outputs if needed
8VI.UH.L1.52 Produced by Danfoss Floor Heating Hydronics 08.2008
Instruction CF-RS Standard Room Thermostat
Initiate transmission test on Room
Thermostat - g. 1
• Press the push button
• LED goes ON
Link test is satisfactory
• LED goes OFF
Link test is unsatisfactory
• LED ashes 5 times
No Link connection to Room
Thermostat
• Try to relocate Room Thermostat in the room
• Or install Repeater Unit (CF-RU) and locate be-
tween Master Controller and Room Thermostat
Note: Master Controller output LED(s) connect-
ed to the room thermostat, ash(es) during Link test
3. Transmission Test
9VI.UH.L1.52 Produced by Danfoss Floor Heating Hydronics 08.2008
Instruction CF-RS Standard Room Thermostat
Placing the Room Thermostat - g. 5
! Wherever possible, the room thermostat should be
installed at a place where the eect of sunlight,
draught, other heaters (eg. TV’s), etc. is avoided.
Mounting with screws - g. 2
4. Mounting
10 VI.UH.L1.52 Produced by Danfoss Floor Heating Hydronics 08.2008
Instruction CF-RS Standard Room Thermostat
Activate Uninstall mode on Master
Controller - g. 1
• Use the Menu selection button to choose
the Uninstall menu. Uninstall LED ashes
• Activate Uninstall mode by pressing OK .
Uninstall LED goes ON
Deselect output on Master Controller
• Select output to be removed by output selec-
tion button
• Remove ashing output with OK
5. Uninstallation
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali Danfoss Termostato
Danfoss
Danfoss DEVIreg 531 Manuale utente
Danfoss
Danfoss C37 Manuale utente
Danfoss
Danfoss ECL Comfort 310, A302 Manuale utente
Danfoss
Danfoss ECtemp Touch Manuale utente
Danfoss
Danfoss Icon Master Manuale utente
Danfoss
Danfoss TP5000 si range Guida
Danfoss
Danfoss GET B-RF Guida
Danfoss
Danfoss ECtemp Next Plus Manuale utente
Danfoss
Danfoss ECtemp 610 Manuale utente
Danfoss
Danfoss DEVIreg Touch Manuale utente
Danfoss
Danfoss TP75-RF Manuale utente
Danfoss
Danfoss TP5001 series Manuale utente
Danfoss
Danfoss TPOne-M Manuale utente
Danfoss
Danfoss 3020P Istruzioni di montaggio
Danfoss
Danfoss KP Series Manuale utente
Danfoss
Danfoss TP9000 Manuale utente
Danfoss
Danfoss TP4000 Range Manuale utente
Danfoss
Danfoss ECL Comfort 310, P318 Manuale utente
Danfoss
Danfoss EFET 130 Manuale utente
Danfoss
Danfoss RET1000 MD Manuale utente
