Dantel 00330 Manuale utente
CAUTION
Install or remove modules from the shelf only when the power is off.
If you install a module in the shelf with the power on, the internal
circuitry may suffer damage and the product warranty will be void.
Remove and install circuit boards only in a static-safe environment
(use antistatic wrist straps, smocks, footwear, etc.).
Keep circuit boards in their antistatic bags when they are not in use.
Do not ship or store circuit boards near strong electrostatic, electromag-
netic, magnetic, or radioactive fields.
For more complete information on electrostatic discharge safety
precautions, refer to BellcoreTM Technical Reference #TR-NWT-000870.
Copyright 1999 by Dantel, Inc. • Dantel is a registered trademark of Dantel, Inc. • ISO 9001 Registered
Printed in the U.S.A.
INSTALLATION&OPERATION MANUAL
00330-1199<90-00045>
00330 DTSS3A
SELECTIVE SIGNALING ORDER
WIRE TERMINAL
About this Practice:
This practice has been reissued to:
• Update Fig. 2.
Issue date: November 1999
Reissued Practices: Updated and
new content can be identified by a
banner in the right margin.
UPDATED
Table of Contents
Ordering Information ............................................................................ 2
General Description ............................................................................... 2
Installation ............................................................................................ 3
Operation ............................................................................................. 14
Technical Specifications ....................................................................... 15
Warranty ............................................................................................. 16
PAGE 2 00330-1199<90-00045>
NOTE: This section lists the different options available for this product. To order any of the avail-
able options, contact Dantel Inside Sales through our toll-free number, 1-800-432-6835.
OPTION NUMBER FEATURES
A15-00330-00 3-digit Order Wire, phone
A15-00330-01 3-digit Order Wire, phone w/ headset jack
A15-00330-02 3-digit Order Wire
A15-00330-07 6-digit Order Wire
A15-00330-31 3-digit Order Wire, 49921 Multi-Line Pick-Up Key, phone w/ headset jack
A15-00330-32 3-digit Order Wire, 49921 Multi-Line Pick-Up Key
A15-00330-37 6-digit Order Wire, 49921 Multi-Line Pick-Up Key
A15-00330-42 3-digit Order Wire, 49922 M Lead Control Driver
A15-00330-72 3-digit Order Wire, 49924 Active Auxiliary Port
ORDERING INFORMATION
GENERAL DESCRIPTION
T
he 00330 DTSS3A provides voice coupling and DTMF
decoding for a telephone, headset, and loudspeaker in a selec-
tive signaling order wire system.
The DTSS3A comes in a housing measuring 15-3/8"W x 7-7/8"D x
1-3/4"H. It can be installed in 19- or 23-inch equipment racks.
The unit features one- to six-digit station dialing and one- to three-
digit all call dialing.
Unanswered calls time out in 90 seconds or may be voluntarily
terminated by the caller. A buzzer is cycled one second on/two
seconds off for an incoming call. Ring-back tone is provided at the
same rate. The buzzer and ring-back tone may be turned off.
Outputs are available for external bells or lights to signal incom-
ing calls.
The DTSS3A works with either a two-wire or four-wire telephone.
The front of the DTSS3A includes a headset jack, speaker mute
switch, test points, test jacks, operational-indicating LEDs, and a
test/reset switch. The backplane includes a modular phone jack
and wire-wrap pins for external connections.
CONTINUED . . .
00330-1199<90-00045> PAGE 3
The following accessory subassemblies may be installed on the
backplane:
♦49921 Multi-Line Pick-Up Key Subassembly - Adapts up to four
key system phones to order wire. Use with four-wire phones
only.
♦49922 M Lead Control Driver - Adapts M lead control in fiber
optic communications system.
♦49924 Active Auxiliary Port - Provides three-way active bridge
for repeater applicatons where the levels are not
+7 dBm RCV/-16 dBm XMT.
The terminal operates on -22 to -56 VDC input power.
GENERAL DESCRIPTION
INSTALLATION
I
nstallation of the 00330 consists of mounting the equipment
shelf, wiring the shelf, setting the switches and straps on all the
modules, and aligning the unit.
1. EQUIPMENT MOUNTING
Install the DTSS3A in an equipment rack using the hardware
supplied. Refer to Fig. 1.
FIG.1 - MOUNTING DIMENSIONS
CONTINUED . . .
49018or49028
ADDRESSSUBASS'Y
44020
DECODER
44022
STATION INTERFACE EXT
SPK AUTO
15 1/2
18”
23”
1 3/4”
7 7/8”
48”
PAGE 4 00330-1199<90-00045>
FIG. 2 - FUNCTIONAL SCHEMATIC, DTSS3A
INSTALLATION
UPDATED
P1
Audio
Visual
Ext Spkr. Control
K1
K1
Ext.
Auto.
1
2
3
4
A
B
C
D
13
1
2
4
6
3
9
20
12
Buzz
Interrupt
2 on / 4 off
Ring Back
Tone
49920
Common Interrupt
Supply Module
J1
13 11 14 17 19
27 12
37 21
Buzzer
4W Xmt
4W Rcv
RGBK Tone
Interrupt
29
41
47
2
4
34
30
51
53
7
13
42
10 Bridging
All
Call
Gp Call
Pwr-up
Clear
Gnd
Talk
Batt.
-V
R.G In
31 35 25 17 23 39 26 3 28
Reset
Out
10 5 78
Port of Common
Interrupt Supply
Headset
Jack
Phone
Jack (J4)
P3-1
P3-2
Busy
Rst In
49018
or
49028
4
12
3
14
Reset In
Ring Start
Pwr-up Clear
Gnd
-V
35 17 39 13 15 8 7
44020
DTMF
Decoder
Module
J3
Gnd
( - )
J6
J1-18 J1-16
Power
-22 to
-56 VDC
D1
J5
55
49
Ring Enable
Sta 1 Out
Pwr-up Busy
Sta 2 Out
-16 dBm
+7 dBm
12
5External Speaker
Lamp (50 mA max)
P1
44022
Station
Interface
J2
Bypass
Bridge Bypass Switch
Bridge
A
B
C
D
S1
In
1
Out
In 4Out
In
3
Out
Out 2In
Direct
Output
Port
Input
Port
Output
Port
Auxiliary
Port
Input Port Termination
P1
14
Xmt
15
16
17
Rcv
+7
-16
P2
10
Xmt
9
8
7
Rcv
+7
-16
P2
2
Xmt
1
3
4
Rcv
+7
-16
P2
12
Xmt
11
5
6
Rcv
+7
-16
Resistive
Bridge
T
R
T1
R1
T
R
T1
R1
T
R
T1
R1
T
R
T1
R1
S2 Aux Port
Termination
Out
In
In
S3
Input
Port
Termination
In
In
In
Out
J7
P1
6
7
10
11
8
9
2W/4W XMT
RCV DROP
(Note 1)
(Note 4)
(Note 4)
(Note 2)
(Note 3)
(Note 4)
NOTES:
1. Remove J6 for floating chassis ground.
2. To use external ringing generators, remove J5 and connect to pin 31 of the 44022-10.
3. Speaker return pair goes to pin 7.
4. To hook up phone with lamp and buzzer, add jumpers from P3-2 to J2-17 and from P3-1 to J2-29.
K1
00330-1199<90-00045> PAGE 5
2. WIRING
Wire the DTSS3A as required. Refer to Fig. 2 for a functional
schematic of the unit.
The DTSS3A uses a buzzer to announce incoming calls. A phone
with a ringer may be used with an external ringing generator
connected to the order wire terminal. (Refer to note 2, on Fig. 2.)
When using a phone with a ringer, replace the 44022-00 module
with a 44022-10 module.
The DTSS3A can be expanded to two or three phones at a single
location. To add phones, connect the bypass ports of additional
DTSS3A units to ports 2 and 4 of the bridge on the main order
wire terminal.
3. SWITCH AND STRAP SETTINGS
Refer to Tables A through F and Figs. 3 through 8 to set the
straps and switches on the modules and DTSS3A backplane.
44020 DTMF Decoder
Refer to Table A and Fig. 3 to set the straps and switches on the
DTMF Decoder.
TABLE A - SWITCH AND STRAP SETTINGS, 44020 DTMF DECODER MODULE
INSTALLATION
CONTINUED . . .
* Factory Setting
OPTION
Input Impedance
Bridging
600 Ohm
Input Level
-10 to +10 dBm
0 to -20 dBm
-10 to -30 dBm
Dial Tone Filter
In
Out
Dialing
12-digit
16-digit
SETTINGS
BRDG *
600 ohms
-10
0 *
+10
DTF IN *
DTF OUT
12 DGT *
16 DGT
* Factory Setting
OPTION
Auxiliary Output
* and #
A and C
* or A
Nonlatching
Externally cleared
Cleared by # or C
# or C
Nonlatching
Externally cleared
Cleared by * or A
SETTINGS
#2, *2, #1, *1 *
C2, A2, C1, A1
PLS *
EXT CLR
# or C CLR
PLS *
EXT CLR
* or A CLR
PAGE 6 00330-1199<90-00045>
FIG. 3 - SWITCH AND STRAP LOCATIONS, 44020
INSTALLATION
CONTINUED . . .
1
12
J1
1
12
J2
C2
#2
A2
2
C1
#1
A1
1
16
DGT
12
0DB
+10DB
-10DB
IN
DTF
OUT
BRDG
600 OHM
OR A # OR CCLR
EXT
CLR
PLS EXT
CLR
00330-1199<90-00045> PAGE 7
49018 Station Selector
The 44020 DTMF Decoder can be equipped with one of two subas-
semblies. If the 49018 Station Selector is used, refer to Table B and
Fig. 4 to set the straps and switches.
TABLE B-SWITCH AND STRAP SETTINGS,49018STATION SELECTOR MODULE
FIG. 4 - SWITCH AND STRAP LOCATIONS, 49018
OPTION
Reset
3 second reset
External or Tone
Number of Digits
1-digit Codes
2-digit Codes
3-digit Codes
Station-Call Code
First Digit
Second Digit
Third Digit
All-Call Code
First Digit
Second Digit
Third Digit
Call Cancellation
* Tone
# Tone
SETTINGS
IN *
OUT
Digit 1
Digit 2
Digit 3 *
S1
S2
S3
S4
S5
S6
SET A *
CLR # *
* Factory Setting
INSTALLATION
CONTINUED . . .
*
A
C
*
CKT 2
X2
X1
X6
12
P1
P2
1
12
S1
S2
S3
S4
S5
S6
IN
OUT
1 DIGIT
2 DIGIT
3 DIGIT
RESET
CLR (X5)
#
SET(X4)
1
CKT 1
0/1
49018-00
STATION
SELECTOR
CKT 1
CKT 2
0/1 #
PAGE 8 00330-1199<90-00045>
49028 Station Selector
The 44020 DTMF Decoder can be equipped with one of two subas-
semblies. If the 49028 Station Selector is used, refer to Table C and
Fig. 5 to set the straps and switches.
TABLE C-SWITCH AND STRAP SETTINGS,49028STATION SELECTOR
FIG. 5 - SWITCH AND STRAP LOCATIONS, 49028
OPTION
Reset
3 second reset
External or Tone
Number of Digits
3-digit Codes
4-digit Codes
5-digit Codes
6-digit Codes
Circuit 1 Code
3-digit Codes
4-digit Codes
5-digit Codes
6-digit Codes
Circuit 2 Code
Call Cancellation
* Tone
# Tone
SETTINGS
X7 IN *
X7 OUT
Digit X3
Digit X4
Digit X5
Digit X6 *
S1 through S3
S1 through S4
S1 through S5
S1 through S6
S7 through S9
SET A *
CLR # *
* Factory Setting
INSTALLATION
CONTINUED . . .
*
IN
P2
1
12
P2
1
12
49028-00
STATION
SELECTOR
CKT 1
CKT 2
S1
S2
S3
S1
S2
S3
S1
S2
S3
CLR
SET
X2
X1
#
OUT
RESET
X7
6 DIGIT
5 DIGIT
4 DIGIT
3 DIGIT
X6
X5
X4
X3
CKT 1
CKT 2
00330-1199<90-00045> PAGE 9
44022 Subscriber Line Interface
Refer to Table D and Fig. 6 to set the straps and switches on the
Subscriber Line Interface.
TABLE D-SWITCH AND STRAP SETTINGS,44022 SUBSCRIBER LINE INTERFACE MODULE
OPTION
Ringback Tone
Group Call
All Call
4-Wire Line RCV
-3 to +7 dBm
-16 to -3 dBm
4-Wire Line XMT
-3 to +7 dBm
-16 to -3 dBm
M Lead Control
M Lead Driver
Off Hook
Privacy
Auto or Manual
None
2W/4W Drop
2-Wire
4-Wire
Sidetone
4W with Sidetone
4W without Sidetone
2W (all uses)
4W Drop RCV
600 ohms
0 ohms
Ring Generator
None
External
SETTINGS
GP IN *
ALL IN *
RCV PAD IN
RCV PAD OUT *
XMT PAD OUT *
XMT PAD IN
IN **
OUT *
PRIVACY IN *
PRIVACY OUT
2W (straps vertical)
4W (straps horizontal)
SIDETONE IN *
SIDETONE OUT
SIDETONE OUT
600 ohms (straps horizontal) *
0 ohms (straps vertical)
OUT *
IN ***
* Factory Setting.
** Use the IN position if DTSS3A is equipped with 49922
M Lead Control Driver.
*** Available on 46022-10 only.
INSTALLATION
CONTINUED . . .
PAGE 10 00330-1199<90-00045>
FIG. 6 - SWITCH AND STRAP LOCATIONS, 44022
49920 Interrupt Supply
Refer to Table E and Fig. 7 to set the straps and switches on the
Interrupt Supply.
TABLE E- SWITCH AND STRAP SETTINGS,49920INTERRUPT SUPPLY MODULE
INSTALLATION
CONTINUED . . .
OPTION
Interrupt
Normal
Reverse
Ringback Tone
Continuous
Cycling
Defeated
Speaker Control (S1)
Automatic
External Control
Buzzer (S2)
Operational
Defeated
SETTINGS
NORM *
REV
TEST
ON *
OFF
AUTO *
EXT SPK
ON *
OFF
* Factory Setting
IN OUT
SIDE TONE
IN OUT
10dB XMT
PRIVACY
REMOTE
M LEAD
OUT
IN
OUT
IN
OUT
IN
ALL
GRP
RCV PAD
OUT
IN
RG
600 OHM
600 OHM
0 OHM
0 OHM
4W
4W
2W2W
R5
R4
Questo manuale è adatto per i seguenti modelli
9
Indice
