Data Video RMC-120 Manuale utente

2005/1/4

Ethernet Control Box

for SE-800

RMC-120

錯誤!

USER MANUAL

Http://www.datavideo-tek.com

Warnings and Precautions

1. Read all of these warnings and save them for later reference.

2. Follow all warnings and instructions marked on this unit.

3. Unplug this unit from the wall outlet before cleaning. Do not

use liquid or aerosol cleaners. Use a damp cloth for cleaning.

4. Do not use this unit in or near water.

5. Do not place this unit on an unstable cart, stand, or table. The

unit may fall, causing serious damage.

6. Slots and openings on the cabinet top, back, and bottom are

provided for ventilation. To ensure safe and reliable operation

of this unit, and to protect it from overheating, do not block or

cover these openings. Do not place this unit on a bed, sofa,

rug, or similar surface, as the ventilation openings on the

bottom of the cabinet will be blocked. This unit should never

be placed near or over a heat register or radiator. This unit

should not be placed in a built-in installation unless proper

ventilation is provided.

7. This product should only be operated from the type of power

source indicated on the marking label of the AC adapter. If

you are not sure of the type of power available, consult your

Datavideo dealer or your local power company.

8. Do not allow anything to rest on the power cord. Do not locate

this unit where the power cord will be walked on, rolled over,

or otherwise stressed.

9. If an extension cord must be used with this unit, make sure

that the total of the ampere ratings on the products plugged

into the extension cord do not exceed the extension cord’s

rating.

10. Make sure that the total amperes of all the units that are

plugged into a single wall outlet do not exceed 15 amperes.

11. Never push objects of any kind into this unit through the

cabinet ventilation slots, as they may touch dangerous

voltage points or short out parts that could result in risk of fire

or electric shock. Never spill liquid of any kind onto or into this

unit.

12. Except as specifically explained elsewhere in this manual, do

not attempt to service this product yourself. Opening or

removing covers that are marked “Do Not Remove” may

expose you to dangerous voltage points or other risks, and

will void your warranty. Refer all service issues to qualified

service personnel.

13. Unplug this product from the wall outlet and refer to qualified

service personnel under the following conditions:

a. When the power cord is damaged or frayed;

b. When liquid has spilled into the unit;

c. When the product has been exposed to rain or water;

d. When the product does not operate normally under

normal operating conditions. Adjust only those

controls that are covered by the operating instructions

in this manual; improper adjustment of other controls

may result in damage to the unit and may often

require extensive work by a qualified technician to

restore the unit to normal operation;

e. When the product has been dropped or the cabinet

has been damaged;

f. When the product exhibits a distinct change in

performance, indicating a need for service.

Table of Contents

Warnings and Precautions …... …... …... …... …... …... …... …..1

Warnings and Precautions

What's in the Box……………..……….………………...…...……….4

Introduction……………………………………...……………..………5

Introduction

Product overview

Features…………………………………………………..….………...6

User Interface Functions……………………………..……….……...7

Installation, Connections, Set up…………………………..……....14

Connections

PC IP setting

RMC-120 IP setting

SE-800 IP setting

Troubleshooting…………………….…………..…………...……....22

No connection

FAQ……………………………………………..………..….………..23

Specification…………..………………………..………..….……….25

Technical Support...…………………………………….…………...26

What’s in the box?

1. RMC-120

2. AC / DC Power Adaptor * 1

3. RJ45 Ethernet cable 1M * 1

(cross over)

4. RS-232 cable 1.2M * 1

5. User manual

6. Installation CD

Introduction

Thank you for purchasing Datavideo’s RMC-120. RMC-120 is

one of SE-800 accessories, which can be used to remote

control SE-800 via RS-232 command with a simple, but

unique operate control interface. You will be amazed and

pleased at what you can do with this advanced piece of

technology. In order to bring out the maximum performance

of this unit, we recommend that you spend some time to read

this manual carefully.

Product Overview

RMC-120 is special designed for SE-800 control by Ethernet.

Now you can remote control shots, mix, and edit, all within

the SE-800 RS-232 protocol. RMC-120 is a simple RJ45 to

RS-232 device, featuring powerful software that allows you to

use your PC or laptop as a control center.

What is the benefit of using that? For example, you could use

it in remote areas, where could be far away from your

switcher as long as you have internet connection.

The full size control panel includes most control functions of

SE-800, which includes video selection, audio selection,

video effects, transition effects, color corrections and RGB

corrections. Also, it includes 30 user programmable macro

function keys that let you play back preset transitions and

effects instantly by clicking a single button.

Features

Standard RJ 45 and RS-232 connectors

Easy to install

Simply connection

Full functions remote control

Friendly user interface

User Interface Functions

1. Joy stick and mode selector

2. Voice sync adjustment

3. Video input format selector

4. Audio channel selectors

5. Audio follow video switch

6. Color processor

7. Border control

8. Background control

9. Transition source selectors

10. GPI function on/off button

11. Play F1 to F30 by sequence

12. Take function key

13. T-Bar

14. Main video source selectors

15. Sub video source selectors

16. Chroma key control

17. Preset Banks F1 to F30

18. Video effects: Picture in Picture

19. Video effects: Paint controls

20. Video effects: Mosaic controls

21. Numeric Keypad

22. Transition effects.

25. Audio channel selectors

18 13

17 12

1. Joystick and Joystick mode selector: The Joystick control

can function either in RGB Color Correction mode or

Position Control mode, depending on the position of the

selector below it. In RGB Correction mode, you can make

real time RGB white balance corrections to the Main

Source video. This function (white balance adjustment) is

effective only with “Input Format selection” mode. In

Position Control mode, the joystick

is used to position the selected

effect (Mosaic or Picture In Picture)

anywhere on the screen in real time.

2. Voice Sync: adjusts for audio delay

or advance from –19 to +3 frames

for the Audio Input that is fed from

the selected Video channel.

3. Input Format selectors: These buttons allow you to select

the input video format for each channel. To operate,

press the upper button to select the channel (each press

cycles the LED to the next channel),

then press the lower button to select

the proper format. Disengage the

selectors by pressing a button in

any other section on the front panel.

4. Audio Input Selectors: Controls which audio input channel

(A, B, C, and/or D) is sent to the Audio Bus “Video”

channel in SE-800. The row of selector buttons across

the top of this section has LEDs to show which input

channel is active. If the A+V function

(5.) is engaged, the source channel

selected on the Main Source bus is automatically

selected. If A+V is not engaged, the input source is user

selectable. Level controls for each input source are the

rotary pots below the selection buttons.

5. A+V: Audio follow video switch. When this button is

engaged (you’ll know it is engaged because the LED is

lit), the audio associated with a selected input source

automatically follows the video through the

dissolve. When the button is inactive, audio

must be switched manually.

6. Color Processor: These controls become active in

conjunction with the Input Format selector (3.). When that

control is active, you can make adjustments to the

selected channel’s brightness, contrast, color, and tint

(NTSC only) by pressing the up and down arrow buttons.

The LEDs on the left side of this section indicate relative

steps above or below unity (the signal exits the control

unchanged). Press and hold the Reset button in the

upper right for 2 seconds or more to reset the Color

Processor controls

all to unity. The

“Reset All” button

resets the color

correction and RGB

correction settings

for all 4 inputs.

Indice

Altri manuali Data Video Interruttore

Data Video

Data Video SE-700 Manuale utente

Data Video

Data Video FS-30 Manuale utente

Data Video

Data Video SE-1200MU Manuale utente

Data Video

Data Video SE-1000 Manuale utente

Data Video

Data Video SE-700 Manuale utente

Data Video

Data Video GO-650 STUDIO Manuale utente

Data Video

Data Video SE-900 Manuale utente

Data Video

Data Video SE-650 Manuale utente

Data Video

Data Video HS-1500T Manuale utente

Data Video

Data Video SE-2000 Manuale utente

Data Video

Data Video iCast 10NDI Manuale utente

Data Video

Data Video ITC-100 KF1000 Manuale utente

Data Video

Data Video SE-900 Manuale utente

Data Video

Data Video SE-800 Manuale di istruzioni

Data Video

Data Video DAC-10 Scheda tecnica

Data Video

Data Video SE-900 Manuale utente

Data Video

Data Video HS-500 Manuale utente

Data Video

Data Video DAC-10 Scheda tecnica

Data Video

Data Video SE-2800 Manuale utente

Data Video

Data Video DVK-400 Manuale utente

Data Video

Data Video SE-500 Manuale utente

Data Video

Data Video SE-3000 Manuale utente

Data Video

Data Video SE-600 Manuale utente

Data Video

Data Video SE-500 Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente