DataCard CD800 Istruzioni per l’uso

CD800™ Card Printer

CLM Laminator

Quick Install and

Upgrade Guide

2 CLM Laminator

CLM Laminator Quick Install and Upgrade Guide

1. Set Up the Printer

Refer to the Quick Install Guide shipped with your printer to

set up the printer and load printer supplies.

Before You Begin

• This laminating system requires that the printer and laminator

rmware is at the same version level for both parts of the

system. The minimum rmware version is D3.15.x-x. Check

the printer LCD panel to see the installed rmware version.

 If your rmware is not at the required minimum level, or if you

receive a rmware version mismatch error (message 222),

use the Card Printer Firmware Update program and

instructions (included on the enclosed CD) to update the

rmware. Or, visit www.datacard.com to download the latest

rmware.

• CD800 systems with serial number 20,000 and above.

You may need to perform the rmware update twice. The rst

update allows the printer to communicate with the laminator.

The second update upgrades the laminator rmware.

• Refer to the printer’s Installation and Administrator’s

Guide, found on the Owner’s Library CD that ships with

the printer, for detailed installation instructions. The latest

user documentation and rmware for your printer and CLM

laminator is available for download at www.datacard.com.

Your laminator may look different from the one shown in the

illustrations, based on the options installed. The procedures

described in this guide apply to all CLM laminators.

3 CLM Laminator

CLM Laminator Quick Install and Upgrade Guide

2. Unpack and Secure the Laminator

a. Remove the laminator from the shipping carton. The

CLM Laminator Quick Install and Upgrade Guide (this

guide) is included in the shipping carton.

Save the shipping carton and packing materials. They

are required if you need to store, move, or return the

system for service.

4 CLM Laminator

CLM Laminator Quick Install and Upgrade Guide

b. Secure the laminator to the mounting surface (optional).

Refer to the printer’s Installation and Administrator’s

Guide for detailed measurements and instructions.

i. Carefully tip the laminator onto its left side (the side

without the access door). Insert the M6 well nuts

into the bolt-down openings in the bottom of the

laminator.

ii. Return the laminator to its upright position and

secure the laminator to the mounting surface with

the two M6 screws.

5 CLM Laminator

CLM Laminator Quick Install and Upgrade Guide

3. Prepare the Printer

Do the following to prepare the printer to connect to the CLM

laminator.

• You cannot attach a printer with a multi-hopper to

the laminator.

• If you have installed a large output hopper, you

must remove it before connecting the printer to

the laminator.

Remove, Replace, or Modify the Reject Card

Tray

The reject card tray must be removed, replaced, or modied

to allow the card to enter the CLM laminator.

CD800 Printers Without Locks:

a. Remove the reject card tray from the printer. Keep the

tray in a safe place in case you need to return it to the

printer in the future.

b. Continue with “Remove the Interconnect Port Tab” on

page 7.

6 CLM Laminator

CLM Laminator Quick Install and Upgrade Guide

a. Remove the reject card tray from the printer.

b. Use a athead screwdriver to remove the oor of the

reject card tray. Note: The edges may be rough after

removing the tray oor.

CD800 Printers with Locks:

Do one of the following:

a. Remove the reject card tray from the printer.

b. If you received a replacement reject card tray without a

tray oor, insert the new tray into your printer.

c. Replace the reject card tray in the printer.

d. Discard the removed tray oor.

7 CLM Laminator

CLM Laminator Quick Install and Upgrade Guide

Front of

Printer

Remove the Interconnect Port Tab

Do this only if necessary. The port tab may not be

present in some printer models.

a. Locate the port tab on the left side of the printer.

b. Use a athead screwdriver to remove the tab.

c. Discard the tab.

8 CLM Laminator

CLM Laminator Quick Install and Upgrade Guide

Remove the Mounting Lock Cover Tab

Do this only if necessary. The lock cover tab may

not be present in some printer models.

To easily determine if the mounting lock cover tab

is present, tip the printer onto its side and look the

shape of the lock cover opening on the underside of

the printer.

If you need to remove the mounting lock cover tab:

a. Carefully tip the printer onto its side.

b. Use a athead screwdriver to remove the mounting lock

cover tab from the bottom of the printer. This allows the

printer to be locked to the laminator.

c. Return the printer to its upright position and discard the

removed tab.

Front of

Printer

Boom of

Printer

Remove the mounng

lock cover tab.

Mounng lock cover

tab is not present. No

acon is necessary.

9 CLM Laminator

CLM Laminator Quick Install and Upgrade Guide

Replace the Output Hopper (Optional)

Cards printed on a laminating system travel through the

laminator and are ejected in the laminator output hopper.

You can replace the printer output hopper with a blank insert

to give the printer a more nished appearance.

a. Remove the output hopper tray by pulling it straight out

from the printer.

b. Slide in the hopper insert that is shipped with the

laminator.

10 CLM Laminator

CLM Laminator Quick Install and Upgrade Guide

Printer—Le Side

Printer—Right Side

Install Vent Covers

The vent covers are supplied with the laminator to give the

printer a nished appearance when it is mounted on the

laminator.

Install the vent covers on the left and right sides of the

printer. The covers snap into the vent openings. The left vent

cover has a large opening to allow space to connect cables.

Altri manuali per CD800

Indice

Altri manuali DataCard Stampante

DataCard

DataCard SP75 Plus Manuale utente

DataCard

DataCard SD260LTM Manuale utente

DataCard

DataCard SP75 Plus Manuale utente

DataCard

DataCard RP90 Manuale utente

DataCard

DataCard CR500 Manuale utente

DataCard

DataCard SP35 Plus Manuale utente

DataCard

DataCard SD260 Manuale utente

DataCard

DataCard CD820 Manuale utente

DataCard

DataCard SR200 Istruzioni per il montaggio

DataCard

DataCard SP35 Plus Manuale utente

DataCard

DataCard 275 Manuale utente

DataCard

DataCard SP55 Plus Manuale utente

DataCard

DataCard ImageCard series Manuale

DataCard

DataCard MPR5000 Manuale utente

DataCard

DataCard CD820 Manuale utente

DataCard

DataCard SP25 Plus Manuale utente

DataCard

DataCard 280P Manuale utente

DataCard

DataCard SP25 Plus Manuale utente

DataCard

DataCard MPR5000 Manuale utente

DataCard

DataCard SP55 Plus Manuale utente

DataCard

DataCard SD260 Manuale di servizio

DataCard

DataCard SP55 Plus Manuale utente

DataCard

DataCard Datacard SP35 Manuale utente

DataCard

DataCard SD260L Manuale utente

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente