Datalogic DLL5100 Series Manuale utente

DATALOGIC S.p.A.,

Via Candini, 2

40012 - Lippo di Calderara

Bologna - Italy

dichiara che

declares that the

déclare que le

bescheinigt, daß das Gerät

declare que el

DLL511X-XX; Hand-Held Laser Reader e tutti i suoi modelli

and all its models

et tous ses modèles

und seine modelle

y todos sus modelos

sono conformi alle Direttive del Consiglio Europeo sottoelencate:

are in conformity with the requirements of the European Council Directives listed below:

sont conformes aux spécifications des Directives de l'Union Européenne ci-dessous:

der nachstehend angeführten Direktiven des Europäischen Rats:

cumple con los requisitos de las Directivas del Consejo Europeo, según la lista

89/336/EEC EMC Directive e92/31/EEC, 93/68/EEC emendamenti successivi

and further amendments

et ses successifs amendements

und späteren Abänderungen

y succesivas enmiendas

Basate sulle legislazioni degli Stati membri in relazione alla compatibilità

elettromagnetica ed alla sicurezza dei prodotti.

On the approximation of the laws of Member States relating to electromagnetic

compatibility and product safety.

Basée sur la législation des Etates membres relative à la compatibilité

électromagnétique et à la sécurité des produits.

Über die Annäherung der Gesetze der Mitgliedsstaaten in bezug auf

elektromagnetische Verträglichkeit und Produktsicherheit entsprechen.

Basado en la aproximación de las leyes de los Países Miembros respecto a la

compatibilidad electromagnética y las Medidas de seguridad relativas al producto.

Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:

This declaration is based upon compliance of the products to the following standards:

Cette déclaration repose sur la conformité des produits aux normes suivantes:

Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:

Esta declaración se basa en el cumplimiento de los productos con la siguientes normas:

EN 55022, August 1994:L

IMITS AND METHODS OF MEASUREMENTS OF

RADIO DISTURBANCE CHARACTERISTICS OF

INFORMATION TECHNOLOGY EQUIPMENT (ITE)

EN 55024, September 1998:I

NFORMATION TECHNOLOGY EQUIPMENT.

IMMUNITY CHARACTERISTICS. LIMITS AND

METHODS OF MEASUREMENTS

Ruggero Cacioppo

Lippo di Calderara, 25/06/2001

Quality Assurance Supervisor

DLL5100 SERIES

LASER SCANNERS

QUICK REFERENCE

INSTALLAZIONE RAPIDA

INSTALLATION RAPIDE

SCHNELLINSTALLATION

820000442 (Rev. B)

USING DLL5100 LASER SCANNERS

DLL5100 LASER SCANNERS automatically scan barcodes at

a distance. Simply aim and pull the trigger. Code scanning is

performed along the scan line emitted from the reading window.

This line must cover the entire code.

Successful scanning is obtained by tilting the scanner with

respect to the barcode to avoid direct reflections which impair

the reading performance, see the figure above.

Gli scanner DLL5100 leggono i codici a barre a distanza: è

sufficiente mirare sul codice e premere il grilletto. La lettura

avviene sulla linea laser che deve attraversare interamente il

codice da leggere. Le condizioni ottimali per la lettura si

ottengono inclinando lo scanner rispetto al codice, così da

evitare riflessioni dirette, che potrebbero compromettere le

prestazioni di lettura (vedere la figura qui sopra).

Les scanners DLL5100 lisent les codes à distance. Il est

suffisant de viser le code. Le code est lit sur la ligne sortant de

la fenêtre de lecture de l'appareil. Cette ligne doit traverser le

code à barres à lire de part en part.

Pour des prestations optimales inclinez la douchette par

rapport au code à lire, afin d'éviter des réflexions directes qui

pourraient compromettre la performance de lecture (voir la

figure ci-dessus).

Die DLL5100 Laserscanner lesen Strichcodes berührungslos.

Es genügt auf den Code zu zielen und abzudrücken. Der Code

wird mittels einer Lichtlinie gelesen, die das Gerät durch das

Lesefenster verläßt und den gesamten Code durchqueren

muß.

Eine optimale Lesegarantie ist gewährleistet, wenn der

Benutzer den Scanner bzgl. dem Code etwas neigt, um eine

direkte Reflexion zu vermeiden, wie im Bild oben gezeigt wird.

FCC COMPLIANCE

This device complies with PART 15 of the FCC

Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any

interference received, including interference which

may cause undesired operation.

This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is

operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction

manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the

user will be required to correct the interference at his own

expense.

WARRANTY

UK Datalogic warranties this product against defects in

workmanship and materials, for a period of 24

months from the date of shipment, provided that the

product is operated under normal and proper

conditions.

Datalogic has the faculty to repair or replace the

product, these provisions do not prolong the original

warranty term.

The warranty does not apply to any product that has

been subject to misuse, accidental damage,

unauthorized repair or tampering.

IDatalogic garantisce questo prodotto contro difetti di

fabbricazione e di materiali per 24 mesi dalla data di

consegna, a condizione che il prodotto sia utilizzato

come previsto.

Datalogic si riserva la facoltà di riparare o sostituire

il prodotto. Quanto sopra non prolunga la garanzia

originale.

La garanzia non si applica a prodotti utilizzati in

modo non corretto, danneggiati accidentalmente,

sottoposti a riparazioni non autorizzate o

manomessi.

FDatalogic garantit ce produit de tout défaut de

fabrication ou des matériels pendant 24 mois de la

date de livraison, à condition que le produit soit

utlisé correctement.

Datalogic a la faculté de réparer ou de remplacer ce

produit. Ces mesures ne prolongeront pas

l’échéance de la garantie.

La garantie ne s’applique pas aux produits qui ont

été utilisés de façon incorrecte, accidentellement

endommagés, soumis à des réparations non

authorisées ou gâchés.

DDatalogic gibt für dieses Produkt eine Garantie von

2 Jahren auf Herstellungs- und Materialfehler ab

Versandsdatum, falls das Produkt unter normalen

und angemessenen Bedingungen verwendet wurde.

Datalogic behaltet sich vor, das Produkt entweder

zu reparieren oder zu ersetzen, was aber den

originalen Garantietermin nicht verlängert.

Die Garantie ist nicht gültig, falls das Produkt falsch

angewandt, zufällig beschädigt, unberechtigt

repariert oder verändert wird.

DLL5100 READING DIAGRAM

10 20 30 40 50

0.12

mm 0.19

0.50

1.00

60 70 cm

CONNECTIONS

RS232

WEDGE

PEN

clr

AF1 D

CF2 F

EF3 on off

GCL J

IPG L

Kfunc

-89

456

123

PQR

STU

WX Z

/_\Y

tab

Portable

terminal

Pen cable

Multidrop network

or other

Host system

Pen cable

3 OPERATING TEST

UK Read the TEST codes below.

ILeggere i codici di test.

FLire les codes tests.

DLesen Sie die Test-Coden.

EAN-8

1234 5670

EAN-13

1 234567 000992

Code 39 (Normal)

17162

Code 128

test

Interleaved 2 of 5

0123456784

UK YOUR READER IS NOW READY TO READ

BARCODES.

To change the defaults see the HHD Software Manual

part number 90ACC1854.

IIL LETTORE È PRONTO A LEGGERE I CODICI.

Per cambiare i parametri di default, fare riferimento al

manuale "HHD Software Manual" n. d'ordine

90ACC1854.

FVOTRE LECTEUR EST DÉSORMAIS PRÊT A

L’EMPLOI POUR LA LECTURE DE CODES.

Pour changer les paramètres voir le manuel "HHD

Software Manual" numéro d'ordre 90ACC1854.

DDAS LESEGERÄT IST JETZT BEREIT CODES ZU

LESEN.

Um die Werkseinstellungsparameter zu ändern,

schlagen Sie im Handbuch "HHD Software Manual"

nach, Bestellnummer 90ACC1854.

DISCONNECTING THE CABLE

TECHNICAL FEATURES - DLL5100

Electrical Features

Power supply 5 Vdc ±10%

Consumption 140 mA max

Sensor VLD

Scan rate 36 ±3 scans/sec

Reading field width see reading diagram

Max. resolution 0.12 mm, 5 mils

PCS min. 30% (Datalogic Test Chart)

Reading indicators Good Read LED, Beeper

Laser Features

Power (typical) in mW 0.8

Scan angle 42°

Laser Safety Class

EN 60825-1 / CDRH 2

Environmental Features

Working Temperature 0 °C to + 40 °C

Storage Temperature -20 °C to + 60 °C

Humidity 90% non condensing

Drop resistance IEC 68-2-32 Test ED

Protection Class IP30

Mechanical Features

Weight (without cable) about 230 g.

Cable length 2 m

WEDGE KEYBOARD NATIONALITY

UK Wedge users should select one of the following

WEDGE KEYBOARD NATIONALITY codes.

IQuando è selezionata l’interfaccia Wedge, leggere uno

dei seguenti codici per impostare la nazionalità della

tastiera.

FPour l’interface Wedge, lire l'un des codes suivants

pour sélectionner la nationalité du clavier.

DFür den Betrieb mit einer Wedge-Schnittstelle lesen Sie

einen der folgenden Codes, um die Tastaturnationalität

einzustellen.

English

i'+k

Deutsch

i'+k

Svenskt

i'+k

Français

i'+gk

Italiano

i'+bk

USA

i'+]k

Español

i'+k

Belge

i'+k

WEDGE (continued)

IBM Terminal 3153

i$1^k

IBM Terminals 31xx, 32xx, 34xx, 37xx:

UK To select the interface for these IBM Terminals,

read the correct KEY TRANSMISSION code. Select

the KEYBOARD TYPE if necessary (default =

advanced keyboard).

IPer selezionare l'interfaccia per i terminali IBM, leg-

gere il codice Key Transmission appropriato e, se

necessario, il codice Keyboard Type (default =

advanced keyboard).

FPour selectionner l'interface pour des terminaux

IBM, lire le code de transmission du clavier (Key

Transmission Code) et, si nécessaire, aussi le code

correspondant à votre clavier (Keyboard Type Code)

(défaut = advanced keyboard).

DUm die Schnittstelle für IBM Terminals einzustellen,

lesen Sie den entsprechenden Key Transmission

Code und falls nötig den Keyboard Type Code

(Werkseinstellung = advanced keyboard).

KEY TRANSMISSION

make-only keyboard

i$1Pk

make-break keyboard

i$1Ik

KEYBOARD TYPE

advanced keyboard

i',fk

typewriter keyboard

i',ak

1DEFAULT

UK Read the restore default and optimize beeper codes.

ILeggere il codice che ripristina i default e il codice

"optimze beeper".

FLecture du code de configuration par défaut et

lecture du code "optimize beeper".

DLesen Sie den Restore Default Code und den

Optimize beeper Code, um die Werkseinstellung

wieder herzustellen.

RESTORE DEFAULT

iPk

optimize beeper

i#0k

RS232 DEFAULT SETTINGS

9600 baud, no parity, 8 data bits, 1 stop bit, no

handshaking, ack/nack disabled, fifo enabled, delay

disabled, rx timeout 5 sec., serial trigger lock disabled;

DATA FORMAT: code identifier disabled, no header,

terminator = CR-LF

WEDGE DEFAULT SETTINGS

USA keyboard, caps lock off, delays disabled control

character emulation = ctrl+shift+key;

DATA FORMAT: code identifier disabled, no header,

terminator = ENTER

PEN DEFAULT SETTINGS

interpret mode, conversion to code 39 disabled, output level

normal, idle level normal, minimum output pulse 600 µs,

overflow medium

POWER SAVE

Laser driver=off before beep

READING PARAMETERS

trigger type = hardware, trigger signal = level, no timeout,

Flash On = 1 sec, Flash Off = .6 sec, one read per cycle,

safety time .5 sec, beeper intensity high, tone 2

DECODING PARAMETERS

ink spread enabled, overflow control enabled, interdigit

control enabled, decoding safety = one read

CODE SELECTION

enabled codes

•EAN 8/EAN 13 / UPC A/UPC E without ADD ON

check digit transmitted, no conversions

•Interleaved 2/5

check digit control and transmission, variable length

code; 4-99 characters

•Standard Code 39

no check digit control, variable length code; 1-99

characters

•Code 128

disabled codes

EAN 128, Code 93, Codabar, pharmaceutical codes

2 READER CONFIGURATION

UK Read the interface selection code for your

application.

ILeggere il codice per la selezione dell’interfaccia

relativo al modo di comunicazione desiderato.

FLecture du code “Interface” correspondant à votre

modèle.

DLesen Sie denjenigen Schnittstellen-Code, der Ihrem

gewünschten Kommunikationsmodus entspricht.

RS232

i$1k

PEN

i$1#k

WEDGE

IBM AT or PS/2 PCs

i$1Bk

IBM XT

i$1Wk

PC Notebook

i$1ek

IBM SURE1

i$1k

READING PARAMETERS

trigger type = hardware, trigger signal = level, no timeout,

Flash On = 1 sec, Flash Off = .6 sec, one read per cycle,

safety time .5 sec, beeper intensity high, tone 2

DECODING PARAMETERS

ink spread enabled, overflow control enabled, interdigit

control enabled, decoding safety = one read

CODE SELECTION

enabled codes

•EAN 8/EAN 13 / UPC A/UPC E without ADD ON

check digit transmitted, no conversions

•Interleaved 2/5

check digit control and transmission, variable length

code; 4-99 characters

•Standard Code 39

no check digit control, variable length code; 1-99

characters

•Code 128

disabled codes

EAN 128, Code 93, Codabar, pharmaceutical codes

2 READER CONFIGURATION

UK Read the interface selection code for your

application.

ILeggere il codice per la selezione dell’interfaccia

relativo al modo di comunicazione desiderato.

FLecture du code “Interface” correspondant à votre

modèle.

DLesen Sie denjenigen Schnittstellen-Code, der Ihrem

gewünschten Kommunikationsmodus entspricht.

RS232

i$1k

PEN

i$1#k

WEDGE

IBM AT or PS/2 PCs

i$1Bk

IBM XT

i$1Wk

PC Notebook

i$1ek

IBM SURE1

i$1k

WEDGE (continued)

IBM Terminal 3153

i$1^k

IBM Terminals 31xx, 32xx, 34xx, 37xx:

UK To select the interface for these IBM Terminals,

read the correct KEY TRANSMISSION code. Select

the KEYBOARD TYPE if necessary (default =

advanced keyboard).

IPer selezionare l'interfaccia per i terminali IBM, leg-

gere il codice Key Transmission appropriato e, se

necessario, il codice Keyboard Type (default =

advanced keyboard).

FPour selectionner l'interface pour des terminaux

IBM, lire le code de transmission du clavier (Key

Transmission Code) et, si nécessaire, aussi le code

correspondant à votre clavier (Keyboard Type Code)

(défaut = advanced keyboard).

DUm die Schnittstelle für IBM Terminals einzustellen,

lesen Sie den entsprechenden Key Transmission

Code und falls nötig den Keyboard Type Code

(Werkseinstellung = advanced keyboard).

KEY TRANSMISSION

make-only keyboard

i$1Pk

make-break keyboard

i$1Ik

KEYBOARD TYPE

advanced keyboard

i',fk

typewriter keyboard

i',ak

1DEFAULT

UK Read the restore default and optimize beeper codes.

ILeggere il codice che ripristina i default e il codice

"optimze beeper".

FLecture du code de configuration par défaut et

lecture du code "optimize beeper".

DLesen Sie den Restore Default Code und den

Optimize beeper Code, um die Werkseinstellung

wieder herzustellen.

RESTORE DEFAULT

iPk

optimize beeper

i#0k

RS232 DEFAULT SETTINGS

9600 baud, no parity, 8 data bits, 1 stop bit, no

handshaking, ack/nack disabled, fifo enabled, delay

disabled, rx timeout 5 sec., serial trigger lock disabled;

DATA FORMAT: code identifier disabled, no header,

terminator = CR-LF

WEDGE DEFAULT SETTINGS

USA keyboard, caps lock off, delays disabled control

character emulation = ctrl+shift+key;

DATA FORMAT: code identifier disabled, no header,

terminator = ENTER

PEN DEFAULT SETTINGS

interpret mode, conversion to code 39 disabled, output level

normal, idle level normal, minimum output pulse 600 µs,

overflow medium

POWER SAVE

Laser driver=off before beep

Indice

Altri manuali Datalogic Lettore di codici a barre

Datalogic

Datalogic Magellan 3300HSi Manuale di installazione e funzionamento

Datalogic

Datalogic Magellan 8500Xt Guida di riferimento

Datalogic

Datalogic QuickScan QM21 1 Series Manuale utente

Datalogic

Datalogic PowerScan PD9530 Manuale utente

Datalogic

Datalogic Gryphon I GFS4400 Manuale utente

Datalogic

Datalogic DX8210 Manuale utente

Datalogic

Datalogic PowerScan PM9600 Series Manuale utente

Datalogic

Datalogic Gryphon I GD44XX Manuale di installazione e funzionamento

Datalogic

Datalogic PowerScan PM9501-AR Series Manuale utente

Datalogic

Datalogic Gryphon I GD4100 Manuale di installazione e funzionamento

Datalogic

Datalogic Gryphon I GD4132 Manuale di installazione e funzionamento

Datalogic

Datalogic PowerScan D8330 Manuale utente

Datalogic

Datalogic GRYPHON BT SH3500 Manuale utente

Datalogic

Datalogic Gryphon D100 Manuale utente

Datalogic

Datalogic QW2120 Manuale utente

Datalogic

Datalogic MAGELLAN 3200VSI Manuale utente

Datalogic

Datalogic MAGELLAN 3200VSI Manuale di installazione e funzionamento

Datalogic

Datalogic GRYPHON Manuale utente

Datalogic

Datalogic PowerScan RF Istruzioni operative

Datalogic

Datalogic Heron HD3130 Istruzioni per l'installazione e il funzionamento

Datalogic

Datalogic Magellan 2200VS Manuale utente

Datalogic

Datalogic AccuLazr AL5010 Manuale utente

Datalogic

Datalogic DX6400 Manuale utente

Datalogic

Datalogic Gryphon I GBT4100 Manuale utente

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente

Atid

Atid AT188N Plus Manuale utente