Datalogic Gryphon-HC Series Manuale utente

Gryphon-HC Handheld Products Cleaning Procedure

Applicable to Gryphon I GD4XXX-HC, GM4XXX-HC, 

GBT4XXX-HC Healthcare Models



Corded Models

Exterior surfaces and scan windows exposed to spills, smudges or

debris accumulation require periodic cleaning to ensure best per-

formance during scanning operations.

Use a soft, lint-free cloth or lens tissue to clean the product.

Dampen it with an approved cleaning agent. Gently wipe all sur-

faces.

Use approved cleaning agents only (see Table 1 below).

Item Description Item Description

Sani-Cloth® HB, Sani-Cloth® Plus,

Super SaniCloth®

Quaternary Ammonium Chloride

solution Virex® 256

n-Alkyl Dimethyl Benzyl



Ammonium Chloride; Didecyl

Dimethyl Ammonium Chloride

Hepacide Quat Il Virucidal disinfectant cleaner 409® Glass and Surface Cleaner Isopropanol (Isopropyl Alcohol),



2 propanol, dimetil carbinol

Alcohol Wipes 70% Isopropyl Alcohol Windex® Blue Isopropyl Alcohol

CaviWipes™ Isopropanol 10-20%; Ethylene Glycol

Monobutyl Ether 1-5% Clorox® Bleach Sodium Hypochlorite;



Sodium Hydroxide

100% Gentle dish soap and water

*When using Ammonia Chloride Solutions be sure to remove residue from the contacts after cleaning.

Do not use abrasive or aggressive cleansing agents or

abrasive pads to clean scan windows, contacts, or

plastics.

Do not spray or pour liquids directly onto the unit.

Table 1. Tested Cleaning Agents

CAUTION

INSTRUCTIONS

BSR idware GmbH

Jakob-Haringer-Str.3

A-5020 Salzburg

Web: www.bsr.at

Gryphon-HC Handheld Products Cleaning Procedure Page 2

Cordless Models

Exterior surfaces and scan windows exposed to spills, smudges or

debris accumulation require periodic cleaning to ensure best perfor-

mance during scanning operations. Contacts on the scanner and the

base should also be cleaned as needed to ensure a good connection.

See below for specific information on how to clean the metal con-

tacts.

Use a soft, lint-free cloth or lens tissue to clean the product. Dampen

it with an approved cleaning agent. Gently wipe all surfaces. A cotton

swab may be used only on hard-to-reach handheld contacts.

Use approved cleaning agents only (see Table 1).

Handheld Contacts

1. Moisten a soft dry cloth with an approved cleaning agent (see Table 1).

2. Rub the cloth back and forth across the contacts. Use care not to leave any cloth

residue.

3. Use the cloth to remove any dirt near the contacts area.

4. Repeat steps 1-3 using a clean dry cloth.

5. Finish by using another clean dry cloth to remove any residue of the cleaning

agent from the contacts.

Cradle Contacts

CAUTION

Do not use abrasive or aggressive cleansing agents or

abrasive pads to clean scan windows, contacts, or

plastics.

Do not spray or pour liquids directly onto the unit.

850006914 (Rev A) October 2013

1. Remove the power cable before cleaning the contacts.

2. Moisten a soft dry cloth with an approved cleaning agent (see Table 1).

3. Rub the cloth from one side of the contacts to the other, moving it slowly back

and forth. Use care not to leave any cloth residue.

4. Use the cloth to remove any dirt near the contacts area.

5. Repeat steps 2, 3 and 4 using a clean dry cloth.

6. Finish by using another clean dry cloth to remove any residue of the cleaning

agent from the contacts.

logic logo are registered trademarks of Datalogic S.p.A. in many coun-

tries, including the U.S.A. and the E.U.

www.datalogic.com

Questo manuale è adatto per i seguenti modelli

Altri manuali Datalogic Lettore di codici a barre

Datalogic

Datalogic Gryphon I GD4100 Manuale di installazione e funzionamento

Datalogic

Datalogic Magellan 800i Manuale di installazione e funzionamento

Datalogic

Datalogic GRYPHON BT Manuale utente

Datalogic

Datalogic PowerScan PBT9501-AR Manuale utente

Datalogic

Datalogic Gryphon Series Manuale di installazione e funzionamento

Datalogic

Datalogic Gryphon I GD44XX Manuale di installazione e funzionamento

Datalogic

Datalogic PowerScan D8300 Manuale utente

Datalogic

Datalogic QUICKSCAN 6000 PLUS Istruzioni operative

Datalogic

Datalogic QuickScan QD2430 Manuale utente

Datalogic

Datalogic QuickScan I QM21X1 Manuale di installazione e funzionamento

Datalogic

Datalogic Gryphon GFE4400 Guida rapida alla configurazione

Datalogic

Datalogic DS6100 Manuale utente

Datalogic

Datalogic PowerScan PD9530 Manuale di installazione e funzionamento

Datalogic

Datalogic PowerScan PM9500 Manuale utente

Datalogic

Datalogic Matrix 210 Manuale del proprietario

Datalogic

Datalogic Touch 90 pro Manuale di installazione e funzionamento

Datalogic

Datalogic PD9330 Manuale utente

Datalogic

Datalogic Gryphon GM44 Series Manuale utente

Datalogic

Datalogic DS6300 Manuale utente

Datalogic

Datalogic Touch TD1100 Family Manuale utente

Datalogic

Datalogic Magellan 1100i Manuale di installazione e funzionamento

Datalogic

Datalogic PowerScan PBT950X Manuale di installazione e funzionamento

Datalogic

Datalogic DS8100 Manuale utente

Datalogic

Datalogic Magellan 2200VS Manuale utente

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente

Atid

Atid AT188N Plus Manuale utente