Datalogic GRYPHON Manuale utente

Gryphon™

Dx30 Readers

QUICK REFERENCE

820001611 (Rev. B)

UPDATES AND LANGUAGE AVAILABILITY

UK/US

The latest drivers and documentation updates for this product

are available on Internet.

Log on to : www.datalogic.com

Su Internet sono disponibili le versioni aggiornate di driver e

documentazione di questo prodotto. Questo manuale è

disponibile anche nella versione italiana.

Collegarsi a : www.datalogic.com

Les versions mises à jour de drivers et documentation de ce

produit sont disponibles sur Internet. Ce manuel est aussi

disponible en version française.

Cliquez sur : www.datalogic.com

Im Internet finden Sie die aktuellsten Versionen der Treiber und

Dokumentation von diesem Produkt. Die deutschsprachige

Version dieses Handbuches ist auch verfügbar.

Adresse : www.datalogic.com

En Internet están disponibles las versiones actualizadas de los

drivers y documentación de este producto. También está

disponible la versión en español de este manual.

Dirección Internet : www.datalogic.com

USING GRYPHON™DX30 READERS

Gryphon™guns automatically scan barcodes at a distance.

Simply aim and pull the trigger. Code scanning is performed

along the center of the light bar emitted from the reading

window. This bar must cover the entire code.

Successful scanning is obtained by tilting the scanner with

respect to the barcode to avoid direct reflections which impair

the reading performance, see the figure above.

Successful reading is signaled by an audible tone plus a

good-read green spot.

CONNECTIONS

RS232

USB

(if required)

IBM USB POS

PEN

WEDGE

DISCONNECTING THE CABLE

INTERFACE SELECTION

Follow the procedure to configure the interface required by your

application.

- USB Interface

- RS232 Interface

- Wedge Interface

- Pen Interface

USB INTERFACE CONFIGURATION

The USB interface is compatible with:

Windows 98 (and later) IBM POS for Windows

Mac OS 8.0 (and later) 4690 Operating System

START-UP

As with all USB devices, upon connection, the Host performs

several checks by communicating with the Gryphon™. During

this phase the green LED on the Gryphon™ reader blinks and

normal operations are suspended. Two basic conditions must

be met before Gryphon™ is ready to read codes, the correct

USB driver must be loaded and sufficient power must be

supplied to the reader.

For all systems, the correct USB driver for the default USB-KBD

interface is included in the Host Operating System and will

either be loaded automatically or will be suggested by the O.S.

and should therefore be selected from the dialog box (the first

time only).

If the Host supplies sufficient power to the reader, the start-up

phase ends correctly, the green LED stops blinking and the

reader emits the beep OK signal.

If the Host does not supply sufficient power to the reader, a

dialog box will appear on the Host and the reader will be

blocked (green LED continues blinking). In this case,

disconnect the USB cable at the Host (green LED stops

blinking), connect and power-up an external supply to USB

cable then reconnect the USB cable to the Host and close the

dialog box. The reader emits the beep OK signal. You can now

read codes. At this point you can read the USB interface

configuration code according to your application. Load drivers

from the O.S. (if requested). When configuring the USB-COM

interface, the relevant files and drivers must be installed from

the USB Device Installation software which can be downloaded

from the web site http://www.datalogic.com.

The reader is ready.

First Start-Up

Connect

Gryphon™ to Host

Does a dialog

box appear

warning that Bus

power is not

sufficient?

Select desired USB

interface code

(USB-KBD is default)

Disconnect reader

at Host

Connect external

power supply to

cable and power up

Reconnect reader

cable to Host and

close dialog box

YES

Read test codes.

Reader is READY

Load drivers

(if requested)

Load drivers

(

if re

uested

)

Green LED blinks

Green LED off - BEEP OK

BEEP OK

Green LED off

Successive start-ups will automatically recognize the previously

loaded drivers. If external power is used, verify that external

power is already supplied.

Successive Start-Ups

YES

Read test codes.

Reader is READY

Green LED blinks

Green LED off - BEEP OK

BEEP OK

Connect Gryphon™

to Host

Disconnect reader

at Host

Connect external

power supply to

cable and power up

Reconnect reader

cable to Host and

close dialog box

Does a dialog box

appear warning

that Bus power is

not sufficient?

USB INTERFACE SELECTION

USB-KBD

Ì$+UA03$-:Î

USB-KBD-ALT-MODE

Ì$+UA04$-@Î

USB-KBD-APPLE

Ì$+UA05$-FÎ

USB-COM*

Ì$+UA02$-4Î

USB-IBM-Table Top

Ì$+UA00$-(Î

USB-IBM-Hand Held

Ì$+UA01$-.Î

* When configuring USB-COM, the relevant files and drivers

must be installed from the USB Device Installation software,

which can be downloaded from the web site

http://www.datalogic.com.

USB KEYBOARD NATIONALITY

USB-KBD users should select one of the following keyboard

nationality codes.

Belge

Ì$+FJ7$-8Î

Deutsch

Ì$+FJ3$-$Î

English

Ì$+FJ4$-)Î

Español

Ì$+FJ6$-3Î

Français

Ì$+FJ2$-ÊÎ

Italiano

Ì$+FJ1$-ÅÎ

Svenskt

Ì$+FJ5$-.Î

USA

Ì$+FJ0$-|Î

Japanese

Ì$+FJ8$-=Î

RS232 READER CONFIGURATION

Read the restore default code, then read the interface selection

code for your application.

RESTORE DEFAULT

Ì$+$*oÎ

RS232

Standard

Ì$+CP0$-$Î

POS SYSTEMS

Nixdorf Mode A

Ì$+CM2EC0$->Î

Fujitsu

Ì$+CM1$-ÈÎ

ICL Mode

Ì$+CM0$-ÃÎ

Altri manuali per GRYPHON

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Datalogic Lettore di codici a barre

Datalogic

Datalogic QuickScan Lite QW2100 Manuale utente

Datalogic

Datalogic Magellan 1100i OEM Manuale per l'uso e la cura

Datalogic

Datalogic QuickScan Lite QW2400 Manuale di installazione e funzionamento

Datalogic

Datalogic Memor 1 Manuale utente

Datalogic

Datalogic POWERSCAN 7000 2D Imager Manuale di installazione e funzionamento

Datalogic

Datalogic Gryphon L GD4300 Manuale utente

Datalogic

Datalogic QuickScan Mobile Manuale utente

Datalogic

Datalogic QuickScan QBT24XX Manuale utente

Datalogic

Datalogic DS6300 Manuale utente

Datalogic

Datalogic POWERSCAN 7000 2D Imager Manuale utente

Datalogic

Datalogic Gryphon GD4500 Manuale utente

Datalogic

Datalogic PowerScan BT8300 Family Manuale utente

Datalogic

Datalogic PowerScan PD7100 Corded Manuale utente

Datalogic

Datalogic PowerScan BT8300 Family Manuale utente

Datalogic

Datalogic Gryphon I GBT4400 2D Manuale utente

Datalogic

Datalogic Compact 2D Reader Matrix-2000 Manuale utente

Datalogic

Datalogic Gryphon I GD44XX Manuale di installazione e funzionamento

Datalogic

Datalogic Touch TD1100 Family Manuale utente

Datalogic

Datalogic MAGELLAN 3200VSI Manuale di installazione e funzionamento

Datalogic

Datalogic Gryphon D432 Manuale utente

Datalogic

Datalogic DS8100 Manuale utente

Datalogic

Datalogic RIDA DBT6400 Manuale di servizio

Datalogic

Datalogic QLM500 Manuale utente

Datalogic

Datalogic DS5100 Manuale utente

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente

Atid

Atid AT188N Plus Manuale utente