Datalogic PowerScan M8300 Manuale utente

PowerScan® M8300 Readers

Quick Reference Guide

Datalogic Scanning, Inc.

959 Terry Street

Eugene, Oregon 97402

Telephone: (541) 683-5700

Fax: (541) 345-7140

tion or the procedures described therein may be reproduced or transmitted in any

form or by any means without prior written permission of Datalogic Scanning, Inc. or

its subsidiaries or affiliates ("Datalogic" or “Datalogic Scanning”). Owners of Datalogic

products are hereby granted a non-exclusive, revocable license to reproduce and

transmit this documentation for the purchaser's own internal business purposes. Pur-

chaser shall not remove or alter any proprietary notices, including copyright notices,

contained in this documentation and shall ensure that all notices appear on any

reproductions of the documentation.

Should future revisions of this manual be published, you can acquire printed versions

by contacting your Datalogic representative. Electronic versions may either be down-

loadable from the Datalogic website (www.scanning.datalogic.com) or provided on

appropriate media. If you visit our website and would like to make comments or sug-

gestions about this or other Datalogic publications, please let us know via the "Con-

tact Datalogic" page.

Disclaimer

Datalogic has taken reasonable measures to provide information in this manual that is

complete and accurate, however, Datalogic reserves the right to change any specifica-

tion at any time without prior notice.

Datalogic is a registered trademark of Datalogic S.p.A. in many countries and the Dat-

alogic logo is a trademark of Datalogic S.p.A. All other brand and product names

referred to herein may be trademarks of their respective owners.

Patents

This product is covered by one or more of the following patents:

Design Pat. AU 310201; AU 310202; CN 693980; HK 0602013.5M001; HK

0602013.5M002; JP 1305693; KR 30-0460940; US D570,843 S.

US Pat. 5,992,740; 6,305,606 B1; 6,808,114 B1; 6,997,385 B2; 7,387,246 B2; 5,103,080;

5,262,627; 5,367,151; 5,449,893; 5,545,889; 5,917,173; 5,923,025; 5,945,659; 6,098,877;

6,220,514 B1; 6,607,132 B1; 6,817,529 B2; 6,834,805 B2.

European Pat. 789,315 B1; 895,175 B1; 1,128,315 B1; 1,396,811 B1.

Additional patents pending.

Quick Reference Guide 1

UPDATES AND LANGUAGE AVAILABILITY

UK/US

The latest drivers and documentation updates for this product are available on

Internet.

Log on to : www.datalogic.com

Su Internet sono disponibili le versioni aggiornate di driver e documentazione di

questo prodotto. Questo manuale è disponibile anche nella versione italiana.

Collegarsi a : www.datalogic.com

Les versions mises à jour de drivers et documentation de ce produit sont disponibles

sur Internet. Ce manuel est aussi disponible en version française.

Cliquez sur : www.datalogic.com

Im Internet finden Sie die aktuellsten Versionen der Treiber und Dokumentation von

diesem Produkt. Die deutschsprachige Version dieses Handbuches ist auch verfügbar.

Adresse : www.datalogic.com

En Internet están disponibles las versiones actualizadas de los drivers y

documentación de este producto. También está disponible la versión en español de

este manual.

Dirección Internet : www.datalogic.com

Using PowerScan® M8300

2 PowerScan® M8300

USING POWERSCAN®M8300

The PowerScan®M8300 series readers can be used with either an BC-80X0 cradle or

Stargate™ radio base station to build a Cordless Reading System for the collection,

decoding and transmission of barcoded data.

PowerScan®M8300 laser readers automatically scan barcodes at a distance. Simply

aim and pull the trigger.

SCAN LINE POSITION

Code scanning is performed along the scan line emitted from the reading window.

This line must cross the entire code. The best reading angles are indicated in the

figure below:

READING ANGLE

Successful scanning is obtained by tilting the reader with respect to the barcode to

avoid direct reflections that impair the reading performance, see the figure below.

Using PowerScan® M8300

Quick Reference Guide 3

AIMING SYSTEM

PowerScan®M8300 provides an aiming system. If enabled, a partial trigger press

produces a red spot, which should be aimed over the code center to get the best

reading performance, see figure (1) above. By completely pressing the trigger the

scan line appears to start the code scanning (2).

After setting up the reader, you can enable or disable the aiming system by reading

the codes below:

Disable Aiming System (Default)

Ì$+Bj0$-"Î

Disable Aiming System (Default)

Ì$+Bj1$-'Î

Charging the Batteries

4 PowerScan® M8300

CHARGING THE BATTERIES

Once the BC-80X0/C-8000 is powered, you can charge the reader's batteries.

Place the PowerScan®M8300 into the BC-80X0 cradle or the C-8000 battery charger.

The "Reader" LED on the cradle/battery charger turns red.

The battery is completely charged when the "Reader" LED on the cradle/battery

charger turns green.

To change the batteries, unscrew the retaining screw and extract the battery pack

from the reader handle. Then, insert the new battery pack into the reader handle and

tighten the screw. (See the following figures).

Figure 1 – Changing the Batteries

Do not incinerate, disassemble, short terminals or expose to high tem-

perature. Risk of fire, explosion. Use specified charger only. Risk of explo-

sion if the battery is replaced by an incorrect type. Dispose of the

batteries as required by the relevant laws in force.

WARNING

Charging the Batteries

Quick Reference Guide 5

SETUP

PowerScan®M8300/BC-80X0 Point-to Point Configuration

1. Connect an BC-80X0 cradle to the Host. For installation and connection infor-

mation see the BC-80X0 Quick Reference Manual.

2. Charge the PowerScan®M8300 battery using an BC-80X0 or the

C-8000 charger as described in this Quick Reference manual. A full charge

takes 4 hours if using an external power supply; while it takes up to 10 hours

if supplying power through the USB port.

3. Configure the reader as described in this Quick Reference -

PowerScan®M8300/BC-80X0 Point-to-Point Setup.

4. Configure the BC-80X0 cradle. See BC-80X0 Configuration in the

BC-80X0 Quick Reference.

PowerScan®M8300/BC-80X0 Stand Alone Configuration

1. Connect an BC-80X0 cradle to the Host. For installation and connection infor-

mation see the BC-80X0 Quick Reference Manual.

2. Charge the PowerScan®M8300 battery using an BC-80X0 or the

C-8000 charger as described in this Quick Reference manual. A full charge

takes 4 hours if using an external power supply; while it takes up to 10 hours

if supplying power through the USB port.

3. Configure the reader as described in this Quick Reference -

PowerScan®M8300/BC-80X0 Stand Alone Setup.

4. Configure the BC-80X0 cradle. See BC-80X0 Configuration in the

BC-80X0 Quick Reference.

PowerScan®M8300/STAR-System™ Configuration

1. Charge the PowerScan®M8300 battery using an BC-8000 or the

C-8000 charger as described in this Quick Reference manual. A full charge

takes 4 hours if using an external power supply; while it takes up to 10 hours

if supplying power through the USB port.

2. Configure the reader as described in this Quick Reference

PowerScan®M8300/STAR-System™ Setup.

PowerScan® M8300 Configuration

6 PowerScan® M8300

POWERSCAN®M8300 CONFIGURATION

PowerScan® M8300/BC-80X0 Point-to-Point Setup

A rapid configuration procedure has been devised for point-to-point applications

where a single reader is associated exclusively with its own BC-80X0 base station and

where it is not necessary to set the Date and Time parameters.

A special pre-printed bind-address label provided in the BC-80X0 base station

package can be used to bind the PowerScan®M8300 reader to the base station with

the address coded on the label. The address is also written numerically on the label to

be easily recognized. Valid addresses are in the range from 0000 to 1999. Make sure

that all cradles used in the same area have different addresses.

To rapidly configure your point-to-point application:

END of procedure. YOUR READER IS NOW READY TO READ CODES.

1. Apply the bind-address label onto the BC-80X0 base station as indicated in

the BC-80X0 Quick Reference Manual.

2. When the BC-80X0 cradle is connected and powered, read the

Bind-Address label to pair the PowerScan®M8300 to the BC-80X0 cradle.

The green LED on the PowerScan®M8300 will blink: the reader is ready to be

positioned onto the cradle.

3. Firmly position the reader onto the cradle within 10 seconds, a beep will be

emitted, signaling that the BC-80X0 cradle has been paired to the

PowerScan®M8300, and the green LED on the reader will go off.

If it ever becomes necessary to

change the reader, just read the

bind-address label applied to the

cradle and position the new

reader onto the cradle.

Do not use multiple readers with

this configuration method.

4. Configure the BC-80X0 cradle, refer to the “BC-80X0 Quick Reference”.

Green LED

PowerScan® M8300 Configuration

Quick Reference Guide 7

POWERSCAN®M8300/BC-80X0 STAND ALONE SETUP

When the BC-80X0 cradle is connected and powered, configure the PowerScan®

M8300 by reading the following codes in the given sequence and follow the

instructions.

Note: for the numeric code selection of steps 3, 4, and 5 use the table at the end

of this Quick Reference.

1. Restore PowerScan®M8300 Default

Ì$+$*oÎ

2. Enter Configuration

Ì$+;Î

3. Set Date

ÌIA%Î

six digits for Day, Month and Year (DDMMYY).

4. Set Time

ÌIB'Î

four digits for Hours and Minutes (HHMM).

5. Set Radio Address

ÌRA0RFHÎ

four digits for the PowerScan®M8300 Address

(from 0000 to 1999).

All readers used in the same area must have different addresses.

6. Exit and Save Configuration

Ì$-?Î

PowerScan® M8300 Configuration

8 PowerScan® M8300

END of procedure. YOUR READER IS NOW READY TO READ CODES.

7. Read the Bind code to pair the PowerScan®M8300 to the BC-80X0 cradle.

The reader is dedicated to the cradle. Any previously bound reader will be

excluded.

To connect several readers to the same cradle see the following section "Using

Multiple Readers with Same Cradle". Bind

Ì$+RN0$-IÎ

The green LED on the PowerScan®M8300 will blink: the reader is ready to be

positioned onto the cradle.

8. Firmly position the reader onto the cradle within 10 seconds, a beep will be

emitted, signaling that the BC-80X0 cradle has been paired to the PowerScan®

M8300, and the green LED on the reader will go off.

9. Configure the BC-80X0 cradle, refer to the “BC-80X0 Quick Reference”.

Green LED

Altri manuali per PowerScan M8300

Indice

Altri manuali Datalogic Lettore di codici a barre

Datalogic

Datalogic Magellan 800i Manuale di installazione e funzionamento

Datalogic

Datalogic DS1100 SH2347 Manuale utente

Datalogic

Datalogic DLC7070 Manuale utente

Datalogic

Datalogic Gryphon I GBT4100 Manuale utente

Datalogic

Datalogic QuickScan Lite QW2100 Manuale utente

Datalogic

Datalogic Gryphon D432E Manuale utente

Datalogic

Datalogic DS8100A-3002 Manuale utente

Datalogic

Datalogic Heron D150 Manuale utente

Datalogic

Datalogic PowerScan PD9530 Manuale di installazione e funzionamento

Datalogic

Datalogic PD9330 Manuale utente

Datalogic

Datalogic DS8100A Manuale utente

Datalogic

Datalogic POWERSCAN 7000 2D Imager Manuale di installazione e funzionamento

Datalogic

Datalogic DSE0421 Guida rapida alla configurazione

Datalogic

Datalogic Gryphon I GPS4400 Manuale di installazione e funzionamento

Datalogic

Datalogic QuickScan Mobile Manuale utente

Datalogic

Datalogic QuickScan QBT2430 Manuale utente

Datalogic

Datalogic PowerScan PM9500 Manuale utente

Datalogic

Datalogic F725-E SERIES Manuale utente

$Datalogic Kyman\ Manuale utente$

Datalogic

Datalogic Kyman\ Manuale utente

Datalogic

Datalogic DX6400 Manuale utente

Datalogic

Datalogic DS4800 OM Manuale utente

Datalogic

Datalogic DS4800 Manuale utente

Datalogic

Datalogic POWERSCAN 7000 2D Imager Manuale utente

Datalogic

Datalogic QuickScan I QD21 1 Series Manuale di installazione e funzionamento

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente

Atid

Atid AT188N Plus Manuale utente