Datamax MP-Nova4 DT Manuale utente
User Manual
MP Nova4 DT
MP Nova4 TT
MP Nova
MP Nova6 DT
MP Nova6 TT
Direct Thermal
Thermal Transfer
MP Nova8 DT
540430
Ì540430hÎ
Table of Contents
User Manual
1. Introduction
2. Safety
3. Product Presentation
4. Product Overview
4.1 In the Box
4.2 Printer Parts MP Nova4, 6 & 8 DT
4.3 Opening and Closing the Cover of MP Nova4, 6 & 8 DT
4.4 Printer Parts MP Nova4 & 6 TT
4.5 Opening and Closing the Cover of MP Nova4 & 6 TT
5. Getting Started
5.1 Overview
5.2 Overview Peel-Off
5.3.1 Inserting Media MP Nova4 & 6
5.3.2 Inserting Media MP Nova8
5.4 Inserting Media - Peel-Off Kit
5.5 Inserting Ink Ribbon
5.6 Connecting
5.7 Test Print & Sensor Auto Adjustment
6. Operation
6.1 Tearing the Media
6.2 Interpreting the Status Lamp – LED
6.3 Media Positioning Sensor Settings
6.4 Adjusting the Print Head
7. Maintenance
8. Troubleshooting
9. Changeable Parts
9.1 Replacing the Roller
9.2 Replacing the Print Head
10. Printer Options and Spare Parts
10.1 Pell-Off Kit, LTS & 215 mm Kit
10.2 Consumables & Spare Parts
11. Consumables (Media General)
12. Technical Specification
1. Introduction
Conditions
© Copyright Imaje AB, Gothenburg 2003
The MP Nova printers with their unique technology have
been developed to offer a range of different applications.
Thank you for choosing an Imaje printer for your business
needs. The high quality, user-friendliness and simple
maintenance procedures of the MP Nova direct thermal
(DT) and thermal transfer (TT) printers make them the
perfect choice.
Manufacturer Address:
IMAJE AB
Säterigatan 20
SE-417 64 Göteborg
SWEDEN
Telephone no: +46 (0) 31-65 69 00
http://www.imaje.com
Conditions
Imaje AB reserves the right to change specifications in
both the text and illustrations without prior notice. The
contents of the publication may not be copied, either
wholly or in part, without permission from Imaje AB.
Imaje AB is not responsible for any direct, indirect,
specific, accidental or resultant injuries caused by a fault
with the machine system or software, or by an error in the
accompanying documentation. In particular, Imaje AB
cannot be held responsible for any program or data stored
or used with Imaje’s products, including the cost of
recovering such programs or data.
First published: July 2002
Item number: 540430
Printed in Sweden
Authors: Göran Telhage and Ann-Sofie Hertzman
Reviser: Annika Hansson
Illustrations: Jörn Schmoldt
Product Photography: Jonatan Fernström
2. Safety
Safety & Certification
Safety Requirements
Imaje disclaims all responsibility regarding the CE directive if
the printer is used, altered or installed in any way other than
described in this manual.
This symbol is used to indicate circumstances that may be
dangerous to the user or that cause damage to the equipment.
Please Note the Following Warnings:
• The MP Nova printers have double fuses. The fuses are
rated at 250 volt, 4.0 A, AT-type. Fuses must be UL-
approved.
• The circuit board contains a battery. Used batteries
should be disposed of in accordance with the manu-
facturer’s instructions.
• Please read all instructions before using the printer for
the first time.
• The printer should be connected to the power supply
indicated on the voltage plate. If you are unsure of the
type of power supply available, please contact Imaje
service personnel.
• The printer is equipped with a plug suitable for earthed
sockets. This is a safety measure. If the plug does not fit
the power socket, a qualified electrician must replace it.
• We do not recommend the use of extension cables.
• The power cable must not be subjected to pressure.
Ensure that the printer is not placed anywhere where
the cable can be stood on.
2. Safety
Safety & Certification
• Check that the power switch is off (in the ‘0’ position)
before connecting the power cable.
• Do not use liquids or aerosols when cleaning this
printer. Always use Imaje’s special cleaning cloths.
• Do not attempt to open the electronic unit or other
sealed parts! The user cannot service these parts.
• Never use sharp or pointed tools when cleaning or
replacing the print head.
• Do not use cables that exceed 5 meters in length for
RS232-communication. Signals may be corrupted or
lost as a result. This is particularly important in
environments where there are high levels of electrical
interference.
• Disconnect the power to the printer and call in qualified
personnel under the following conditions:
! The power cable or plug is damaged or worn.
! Liquid has been spilled on the printer.
! Rain or water has got into the printer.
! The printer is not functioning correctly despite that
the user has followed the instructions for use.
! You have dropped the printer or the casing has been
damaged.
! The printer is not functioning correctly and requires
service.
2. Safety
Safety & Certification
Machine Sign
Certification and Approvals
The MP Nova printers are certified in accordance
with the requirements for CE marking.
CE = European Commission
The MP Nova printers are UL-approved.
UL = Underwriter Laboratories USA
2. Safety
Safety & Certification
CE Standards & Directives
MP Nova printers are subject to the following standards:
In accordance with European directives applicable to the
products, that is to say:
• With the electromagnetic compatibility directive
EMC Directive 89/336/CEE with the European
standards which are its technical answer.
• With the Low Voltage Directive 93/68/CEE and
with the European standards which are its
technical answer.
The above referenced product bears the CE mark.
3. Product Presentation
The MP Nova Series
Imaje achieves diversity with its thermal printers, the MP series.
Powerful and intelligent with a multitude of functionality you
would not expect from one of the smallest printers on the
market.
They are built on a platform with advanced software, offering
wide possibilities from simple local solutions to integrated
solutions working over Internet.
Typical Applications:
Manufacturing
Warehousing
Healthcare
Transport
Ticketing
Printer Models
MP Nova4 DT, 200 dpi
Item number: 745130.
MP Nova4 DT, 300 dpi
Item number: 745160.
MP Nova6 DT, 200 dpi
Item number: 765130.
MP Nova8 DT, 200 dpi
Item number: 785130.
MP Nova4 TT, 200 dpi
Item number: 745140.
MP Nova4 TT, 300 dpi
Item number: 745165.
MP Nova6 TT, 200 dpi
Item number: 765140.
4. Product Overview
4.1 In the Box
MP Nova4 DT & MP Nova6 DT
The following items should be included in the box when you receive
your new MP Nova4 DT or MP Nova6 DT printer:
1. 1 x MP Nova4 DT or MP Nova6 DT
2. 1 x Cleaning cloth
3. 1 x Communication cable (Serial RS 232)
4. 1 x Power cable
5. 1 x Media roll
6. 1 x Getting Started CD
4. Product Overview
4.1 In the Box
MP Nova4 TT & MP Nova6 TT
The following items should be included in the box when you receive
your new MP Nova4 TT or MP Nova6 TT printer:
1. 1 x MP Nova4 TT or MP Nova6 TT
2. 1 x Cleaning cloth
3. 1 x Communication cable (Serial RS 232)
4. 1 x Power cable
5. 1 x Media roll
6. 1 x Getting Started CD
7. 1 x Ink ribbon, loaded in the machine
Questo manuale è adatto per i seguenti modelli
7
Indice
Altri manuali Datamax Stampante
Datamax
Datamax Apex 3 Manuale utente
Datamax
Datamax 88-2312-01 Manuale utente
Datamax
Datamax M-Class Mark II M-4206 Manuale utente
Datamax
Datamax Mark II E-4205e Manuale utente
Datamax
Datamax E-Class Mark II Manuale utente
Datamax
Datamax MICROFLASH 4TE Manuale utente
Datamax
Datamax Apex 2 Manuale utente
Datamax
Datamax MP Compact4 Mark II Manuale utente
Datamax
Datamax I-Class Mark II Manuale utente
Datamax
Datamax Label Printer Manuale utente
Datamax
Datamax ST-3210 Manuale operativo e di manutenzione
Datamax
Datamax PrintPAD CN70 Manuale utente
Datamax
Datamax MICROFLASH 4T Manuale utente
Datamax
Datamax ?-class series Manuale utente
Datamax
Datamax H Class Manuale utente
Datamax
Datamax RL4 Manuale utente
Datamax
Datamax Ex2 Manuale utente
Datamax
Datamax I-Class Manuale utente
Datamax
Datamax Apex 3 Manuale utente
Datamax
Datamax Apex 4 Manuale utente
