DataMetrics 2000 Series Manuale utente

This manual is intended to function as an example ONLY and does not represent all configurations and options for this product.

Model 2000 Series

Ruggedized Dot Matrix Printer

Operation and Maintenance Manual

Model 2000 Printer

DataMetrics Corporation

1717 Diplomacy Row

Orlando, FL 32809

PHONE: 407.251.4577

FAX: 407.251.4588

EMAIL: [email protected]

Data Rights Provisions

THE INFORMATION CONTAINED IN THIS MANUAL IS SUPPLIED WITH LIMITED RIGHTS ONLY. DATA

SHALL NOT, WITHOUT THE WRITTEN PERMISSION OF THE CONTRACTOR, BE EITHER (A) USED,

RELEASED, OR DISCLOSED IN WHOLE OR IN PART OUTSIDE THE GOVERNMENT, (B) USED IN

WHOLE OR IN PART BY THE GOVERNMENT FOR MANUFACTURE OR, IN THE CASE OF COMPUTER

SOFTWARE DOCUMENTATION, FOR PREPARING THE SAME OR SIMILAR COMPUTER SOFTWARE,

OR (C) USED BY A PARTY OTHER THAN THE GOVERNMENT, EXCEPT FOR: (1) EMERGENCY

REPAIR OR OVERHAUL WORK ONLY, BY OR FOR THE GOVERNMENT, WHERE THE ITEM OR

PROCESS CONCERNED IS NOT OTHERWISE REASONABLY AVAILABLE TO ENABLE TIMELY

PERFORMANCE OF THE WORK, PROVIDED THAT THE RELEASE OR DISCLOSURE HEREOF

OUTSIDE THE GOVERNMENT SHALL BE MADE SUBJECT TO A PROHIBITION AGAINST FURTHER

USE, RELEASE OR DISCLOSURE; OR (2) RELEASE TO A FOREIGN GOVERNMENT, AS THE

INTEREST OF THE UNITED STATES MAY REQUIRE, ONLY FOR INFORMATION OR EVALUATION

WITHIN SUCH GOVERNMENT OR THE CONDITIONS OF (1) ABOVE. THIS STATEMENT SHALL BE

INCLUDED ON ANY REPRODUCTION HEREOF.

MODEL 2000 PRINTER OPERATION AND MAINTENANCE

DataMetrics Corporation i

Contents

1. CONFIGURATION ............................................................................................................1

1.1. Introduction......................................................................................................................1

2. GENERAL INFORMATION...............................................................................................5

2.1. Introduction......................................................................................................................5

2.2. Applicable Documents.....................................................................................................5

2.3. Printer Description...........................................................................................................5

2.3.1. Power Subsystem.........................................................................................................5

2.3.2. Printing Subsystem.......................................................................................................5

2.3.3. Control Panel................................................................................................................6

2.3.4. External Interfaces.......................................................................................................6

2.4. Specifications..................................................................................................................6

2.5. Options..........................................................................................................................10

2.5.1. Memory Buffer............................................................................................................10

2.5.2. RS-232 Interface ........................................................................................................10

2.5.3. Ethernet Interface.......................................................................................................10

2.5.4. 28 Vdc Input Power....................................................................................................10

3. INSTALLATION...............................................................................................................11

3.1. Introduction....................................................................................................................11

3.2. Chassis Installation Configuration .................................................................................11

3.3. Unpacking .....................................................................................................................11

3.4. Ribbon Installation.........................................................................................................11

3.5. Paper Installation...........................................................................................................11

3.5.1. External Paper Feed...................................................................................................17

3.5.2. Internal Paper Feed....................................................................................................17

3.6. External Cable Installation.............................................................................................18

3.7. Software Installation......................................................................................................19

3.8. Setup Utility...................................................................................................................19

3.9. Limited Operation, Storage, and Transportation............................................................22

4. OPERATION...................................................................................................................23

4.1. Introduction....................................................................................................................23

4.2. Controls and Indicators..................................................................................................23

4.3. Self Test........................................................................................................................25

4.4. Normal Operation..........................................................................................................25

4.4.1. Stopping a Print Job...................................................................................................25

4.5. Error Conditions ............................................................................................................25

4.6. Shutdown ......................................................................................................................25

5. FUNCTIONAL DESCRIPTION........................................................................................27

5.1. Introduction....................................................................................................................27

5.1.1. Power Distribution ......................................................................................................27

5.1.2. Printing Subsystem.....................................................................................................27

5.1.3. Control Panel..............................................................................................................27

5.1.4. Heaters.......................................................................................................................27

MODEL 2000 PRINTER OPERATION AND MAINTENANCE

DataMetrics Corporation ii

6. MAINTENANCE ..............................................................................................................29

6.1. Introduction....................................................................................................................29

6.2. Tools and Test Equipment.............................................................................................29

6.3. Periodic Maintenance....................................................................................................29

6.3.1. Cleaning and Lubrication............................................................................................29

6.3.2. Ribbon Cassette Re-Inking.........................................................................................29

6.4. Fault Isolation................................................................................................................29

6.5. Replaceable Components and Subassemblies.............................................................29

6.5.1. Ribbon Cassette.........................................................................................................34

6.5.2. Print Engine................................................................................................................34

6.5.3. Power Supply .............................................................................................................35

6.5.4. Circuit Breaker Assembly...........................................................................................35

6.5.5. Line Filter....................................................................................................................36

6.5.6. Controller Board .........................................................................................................36

6.5.7. Control Panel Interface...............................................................................................37

6.5.8. Control Panel..............................................................................................................37

MODEL 2000 PRINTER OPERATION AND MAINTENANCE

DataMetrics Corporation iii

Figures

Figure 2-1. Tabletop/External Paper Feed Configuration......................................................6

Figure 2-2. Rack Mount/Internal Paper Feed Configuration..................................................7

Figure 3-1. Rack Mount/Internal Paper Feed Configuration Installation Dimensions ..........12

Figure 3-2. Tabletop/External Paper Feed Configuration Installation Dimensions ..............13

Figure 3-3. Tabletop Configuration Mounting Footprint.......................................................14

Figure 3-4. External Feed Configuration Ribbon and Paper Installation..............................15

Figure 3-5. Internal Feed Configuration Ribbon and Paper Installation...............................16

Figure 3-6. Rear Panel........................................................................................................18

Figure 4-1. Front Panel........................................................................................................23

Figure 5-1. Chassis Interconnections..................................................................................28

Figure 6-1. Periodic Maintenance Locations .......................................................................30

Figure 6-2. External Feed Configuration Replaceable Unit Locations.................................32

Figure 6-3. Internal Feed Configuration Replaceable Unit Locations ..................................33

Tables

Table 1-1. System Configuration...........................................................................................2

Table 1-2. Field Replaceable Units........................................................................................2

Table 1-3. External Cables....................................................................................................2

Table 1-4. External Connector Signal Assignments ..............................................................3

Table 2-1. Physical Specifications.........................................................................................7

Table 2-2. Electrical Specifications........................................................................................8

Table 2-3. Environmental Specifications ...............................................................................8

Table 2-4. Printer Performance Specifications......................................................................9

Table 3-1. Setup Utility Menus ............................................................................................20

Table 3-2. Setup Utility Function Keys.................................................................................22

Table 4-1. Controls and Indicators ......................................................................................24

Table 6-1. Fault Isolation.....................................................................................................31

MODEL 2000 PRINTER OPERATION AND MAINTENANCE

DataMetrics Corporation 1

1. CONFIGURATION

1.1. Introduction

This chapter defines the configuration of a specific Model 2x00 printer. Information is

provided concerning system configuration (Table 1-1), field-replaceable units (Table 1-2),

external cabling (Table 1-3), and external connector signal assignments (Table 1-4).

MODEL 2000 PRINTER OPERATION AND MAINTENANCE

DataMetrics Corporation 2

Table 1-1. System Configuration

Characteristic Description

Top Assembly Part No. 202000-001

Paper-Feed Configuration External Feed

Installation Configuration Tabletop

Table 1-2. Field Replaceable Units

Description Part No.

Print Engine Assembly 200014-001

Control Panel Interface 200094-001

Power Supply Assembly 200179-002

Circuit Breaker Assembly 200220-002

Ribbon Cassette 302000-095 (1)

Controller Board 302000-098

Line Filter 600011-001

Control Panel 700002-001

(1) Equivalent to Panasonic order number KX-P160.

Table 1-3. External Cables

Description Part No.

AC Power Cable 200199-003

Indice

Altri manuali DataMetrics Stampante

DataMetrics

DataMetrics 1980 Series Manuale utente

DataMetrics

DataMetrics 4080B Guida alla risoluzione dei problemi

DataMetrics

DataMetrics 2200 Manuale utente

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente