Datapath ARQA Series Manuale utente

Engineering the world’s best visual solutions

Quick Start Guide

Arqa TX1/C

Arqa TX1/F

Arqa RX1/C

Arqa RX1/F

Thank you for purchasing the Datapath

Arqa TX1 or RX1 units. The aim

of this document is to quickly guide you

through the process of initial setup.

For detailed information, the Arqa and

Arqa Network Manager User Guide can be

downloaded from www.datapath.co.uk

If any of the items are missing, please

contact Datapath for further instructions.

The latest version of the Arqa Network

Manager software is available to download

from the USB stick included within your

pack.

CONTENTS

1 x Arqa TX1 unit, or

1 x Arqa RX1 unit

ARQA TX1 (TRANSMITTER UNIT)

1 x wall power supply unit 12V 1A

(European or International plug)

1 x DVI to HDMI cable 1.8m

1 x USB cable 1.8m

2 x audio cables 1.8m

1 x DVI to HDMI adapter

1 x rubber feet (incl 4 pcs)

1 x mounting pad (incl 4 pcs)

Fiber version only

2 x SFP 1G Multi-mode up to 500m.

1 x plugged into the device and 1 x in

the box for far end connection to a switch

TX1/C

TX1/F

Arqa Quick Start Guide

ARQA RX1 (RECEIVER UNIT)

1 x wall power supply unit 12V 1A

(European or International plug)

1 x rubber feet (incl 4 pcs)

1 x mounting pad (incl 4 pcs)

1 x DVI to HDMI adapter

Fiber version only

2 x SFP 1G Multi-mode up to 500m. 1 x plugged

into the device and 1 x in the box for far end

connection to a switch

RACK MOUNT KIT (OPTIONAL)

1 x rack shelf

2 x mains power cables

1 x faceplate

Redundant Power Supply Unit (RPSU)

1 x accessories bag containing faceplate

xing screws

RX1/C

RX1/F

Arqa Quick Start Guide

STEP 1 CONNECTING THE ARQA RX1/C

AND TX1/C COPPER UNITS

DVI in

from PC

Audio

from PC

USB to PC

Audio

to PC

DVI out to Monitor

(optional)

Audio in from

Microphone

Audio out

to Speaker

USB Keyboard

and Mouse

Power Socket

12V 1A

Power Socket

12V 1A

Local DVI - In RS232

DC USB KVM - Link

Out

Local DVI - Out

TX1/C

RS232In Out

USB

KVM - Link

DVI - Out

RX1/C

Network cable CAT5e/6.

Up to 150m/492ft

Arqa Quick Start Guide

STEP 1 CONNECTING THE ARQA RX1/F

AND TX1/F OPTICAL UNITS

DVI in

from PC

Audio

from PC

USB to PC

Audio

to PC

DVI out to Monitor

(optional)

Audio in from

Microphone

Audio out

to Speaker

USB Keyboard

and Mouse

Power Socket

12V 1A

Power Socket

12V 1A

Local DVI - In RS232

DC USB KVM - Link

Out

Local DVI - Out

TX1/F

RS232In Out

USB

KVM - Link

DVI - Out

RX1/F

Network cable

Multi-mode Fiber.

Up to 500m/1640ft

Arqa Quick Start Guide

Connect the Arqa RX1 and the TX1 as follows using the connection illustrations as a guide:

Connect both the Arqa RX1 and the TX1 to the 12V 1A power supply provided.

Connect the USB cable (provided) to a USB port on the PC and to the USB port on the Arqa TX1.

Connect a keyboard and mouse to the USB ports on the Arqa RX1.

Connect the Arqa RX1/C and TX1/C using a CAT5e/6 cable (not supplied).

Connect the Arqa RX1/F and TX1/F using a ber cable (not supplied) connected to the SFP

modules in each unit.

Connect the graphics output of your PC to the DVI In port of the Arqa TX1 using the supplied HDMI

to DVI video cable.

Connect the DVI Out port of the Arqa TX1 into a local monitor if required. You can use the supplied

DVI/HDMI adapter to reconnect your original HDMI cable back into the HDMI input of your local

monitor.

Connect the Arqa RX1 DVI Out port to the remote monitor using the video cable supplied with

your monitor and the DVI/HDMI adapter supplied with your RX1 receiver.

If using a network switch, connect all endpoints from the units to the switch. Ensure that all

connections have a minimum bandwidth of 1 Gbit/sec. For video sharing the network switch must

support IGMP snooping.

STEP 2 ATTACHING THE ARQA TX1 UNITS TO THE RMK

Attach the Arqa TX1 to the faceplate by removing the top left and bottom right screws (1). Align the

blank screw holes on the faceplate (2), then insert the screws to lock the Arqa TX1 units in place.

RMK

Arqa Quick Start Guide

STEP 3 OPERATION

Start up a point-to-point connection (without a network switch)

The start up for a point-to-point connection is the same whether you are using the Copper

or Fiber version of the Datapath Arqa.

Ensure all connections between the PC, Arqa TX1 and the RX1 are sound.

Turn on the PC and both monitors.

Both units will start an initialisation process indicated by the red status LED ashing for

a few seconds, then turning solid Green.

Press the Scroll Key on your keyboard ve times in quick succession to open the

On Screen Display menu then enter‘P’ to enable Point-to-Point mode.

The monitor will display the desktop of the PC and any open applications.

Single point-to-point connection

Switching System connections

Arqa RX1

Screen, Keyboard

& Mouse

Arqa RX1

Screen, Keyboard

& Mouse

Arqa RX1

Screen, Keyboard

& Mouse

Arqa RX1

Screen, Keyboard

& Mouse

Arqa RX1

Screen, Keyboard

& Mouse

Network Manager Server

Network

Switch

Up to 2000

Endpoints

Arqa TX1

Screen, Keyboard & Mouse

Distance up to 150m Copper / up to 500m - Fiber

Arqa TX1Arqa RX1

Arqa Quick Start Guide

START UP A NETWORK SWITCH CONNECTION

The start up for a network switch connection is the same if you are using the Copper or Fiber version of the

Datapath Arqa.

Plug all units into the Network Switch using network cables. A Windows based PC containing the Arqa

Network Manager software should also be connected to the network switch. Instructions for installing

the Arqa Network Manager can be found in the Arqa Network Manager User Guide.

Once installed, run the Arqa Network Manager application on the Arqa Network Manager Server. You will

be prompted to login into the default administrator account:

User: admin

Password: admin

Open the System tab and click on ‘General Settings’.

Select a network interface from the pull down list (1). Enable unit automatic add (2) then click ‘Save’(3).

The Arqa Network Manager will require a restart to enable it to discover all the units.

The Arqa Network Manager reopens with the Layout tab open in the Grid view.

All units will have been discovered if not, check all connections are sound.

You can then click on an Arqa TX1 and Arqa RX1 to make a connection.

See the Arqa Network Manager User Guide for more detailed information.

Arqa Quick Start Guide

STEP 4 TROUBLESHOOTING

LED Cause Solution

LED does not

illuminate. No Power. Check Power supply unit is connected.

LED displays

Red.

No connection

between the Arqa TX1

and RX1.

Check if the RJ45/network cable is connected. A clicking noise

should be heard when plugging it in.

LED displays

Orange.

Image not displayed

on monitor.

Check all connections from the Arqa TX1 to the local PC.

Check if the Arqa RX1 (monitor) cable is connected correctly.

If everything is connected well but no function appears,

reconnect power supply again.

If the On Screen Display is visible, select the ‘O’ option and

choose the resolution of the monitor. Then press the assigned

number on your keyboard.

LED displays

Green.

Keyboard

not working.

Unplug the keyboard and reconnect, wait until driver is

installed (after few seconds).

Check all USB connections on both sides (Arqa TX1 and RX1).

If it is still not working, unplug then plug inthe power supply.

LED displays

Green. No audio.

Establish audio connection:

Plug stereo-jack to the audio output of the PC (green) and

connect to the ‘In’ socket on the Arqa TX1. Connect the Arqa

RX1 ‘Out’ to the speaker/headset.

Establish microphone connection:

Plug stereo-jack to the microphone input of the PC (pink)

and connect to the ‘Out’ socket on the Arqa TX1. Connect

the Arqa RX1 ‘In’to the microphone.

LED displays

Green.

The screen ickers, has

an abnormal display.

Download and install the latest rmware from the Datapath

website.

LED ashing

Green.

The Arqa RX1 and TX1

have dierent rmware

installed or the USB is

not compatible.

Contact the Datapath Support Team.

LED are

lighting

dierently.

The Arqa RX1 and TX1

may have dierent

rmware installed.

Enter the On Screen Display to conrm the rmware versions.

To open the On Screen Display press the ‘Scroll Lock Key’ a

minimum of ve times in quick succession. The rmware

version is displayed below the menu. Should a rmware

update not work, contact the Datapath Support Team.

Arqa Quick Start Guide

Datapath Limited claims copyright on this documentation. No part of this

documentation may be reproduced, released, disclosed, stored in any

electronic format, or used in whole or in part for any purpose other than

stated herein without the express permission of Datapath Limited.

Whilst every eort is made to ensure that the information contained in this

Quick Start Guide is correct, Datapath Limited make no representations or

warranties with respect to the contents thereof, and do not accept liability for

any errors or omissions.

Datapath reserves the right to change specication without prior notice and

cannot assume responsibility for the use made of the information supplied.

All registered trademarks used within this documentation are acknowledged

by Datapath Limited.

Arqa Quick Start Guide

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Datapath Ricevitore

Datapath

Datapath ALIGO QTX100 Manuale utente

Manuali Ricevitore popolari di altre marche

Garmin

Garmin GA 23 Manuale utente

Aiphone

Aiphone PS-12F Manuale utente

IMES

IMES TCS-01CA-PMI Manuale utente

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuale

AMIMON

AMIMON AMN12310 WHDI Manuale utente

Dual

Dual DMCPA79BT Istruzioni operative

Sound Associates

Sound Associates SA652P Manuale utente

Sherwood

Sherwood NewCastle R-772 Manuale utente

Audio

Audio A10-RX Series Manuale utente

AllSee

AllSee PushShare PSRV1.1 Manuale utente

DEMAG

DEMAG DRC-DR D2 Manuale utente

Teleco

Teleco TVRCL868A02 Manuale utente

Bosch

Bosch RF3222E Manuale utente

Kramer

Kramer 631R Manuale utente

Xpress

Xpress xmc10 Manuale utente

JVC

JVC KD-MR1BTS Manuale utente

Omega Engineering

Omega Engineering UWTC-REC3 Manuale utente

e-survey

e-survey E300 Pro Manuale utente