Datapath Arqa TX1/C Manuale utente
Engineering the world’s best visual solutions
User Guide
Arqa TX1/C
Arqa TX1/F
Arqa RX1/C
Arqa RX1/F
CONTENTS
UNPACKING 4-5
INTRODUCTION 5
HARDWARE 6
Arqa TX1 6
Arqa RX1 7
Status LED 8
Installing the Arqa TX1 and RX1 Extenders 9
Connecting the Arqa RX1/C and TX1/C Extenders 10-11
Removing a CATx Cable 11
Connecting the Arqa RX1/F and TX1/F Extenders 12-13
Removing a Fiber Cable 13
Replacing the SFP Module 14
Mounting Options 14
Optional Rack Mounting Kit (RMK) 15
Attaching the Arqa TX1 Extenders to the RMK 15
Fitting the Correct PSU Blade 15
SOFTWARE 16
Using the On Screen Display 16
Main Menu shortcuts 16
Status Overview 17
Dening what DDC Data your PC Uses 17
Available Devices 18
Managing Favourite Devices 19
Changing the Setting of your Arqa Units 19
Arqa TX1 Settings 19
VGA Parameters 20
Arqa RX1 Settings 21
Audio Input Gain = A 21
RS232 Baud rate = R 21
RS232 Connector Pinning 22
2
Arqa User Guide
Show the Last Received Image = S 23
Using the Power Save Mode = P 23
Selecting a Keyboard Layout = K 23
Changing the Keyboard Fallback Mode - O 23
Editing Keyboard Shortcuts = H 24
Hide Status Screen = N 24
NETWORK SETTINGS AND MANAGEMENT SWITCHING SYSTEMS 25
CONNECTING, DISCONNECTING OR SELECTING A CURRENT 25
WORKPLACE CONNECTED DEVICE
Enabling a direct connection 25
TROUBLESHOOTING 26-28
Arqa RX1/TX1 LED Warnings 26-27
MAINTENANCE 29
ENVIRONMENTAL 30
CE 30
FCC 30
Disposal 30
SPECIFICATIONS 31
Arqa RX1/TX1 31
Arqa RMK 31
WARRANTY/RMA 32
Warranty Statement 32
RMA Returns Policy 32
Disclaimer/Copyright Statement 33
CABLE/NETWORK SWITCH REQUIREMENTS 34
Schema EIA/TIA-568 B 34
Fiber Cables 34
Multi-Mode 34
Single-Mode 35
RECOMMENDED NETWORK SWITCHES 36
INDEX 37
3
Arqa User Guide
UNPACKING
Your packing box should contain the
following items:
1x Arqa TX1 unit
or 1x Arqa RX1 unit
Transmitter Unit (Arqa TX1).
1 x wall power supply unit l 12V 1A
(European or International plug)
1 x DVI - HDMI cable 1.8m/5.9ft
1 x USB cable 1.8m/5.9ft
2 x audio cables 1.8m
1 x DVI to HDMI adapter
1 x rubber feet (incl 4 pcs)
1 x mounting pad (incl 4 pcs)
Receiver Unit (Arqa RX1)
1 x wall power supply unit l 12V 1A (European or
International plug)
1 x rubber feet (incl 4 pcs)
1 x mounting pad (incl 4 pcs)
1 x DVI to HDMI adapter
Fiber version only
2 x SFP 1G Multi-mode up to 500m. 1 x plugged
into the device and 1 x in the box for far end
connection to a switch
TX1/C
TX1/F
4
Arqa User Guide
Rack Mount Kit (Optional)
1 x rack shelf
2 x mains power cables
1 x faceplate
1 x Redundant Power Supply Unit (RPSU)
1 x accessories bag containing faceplate
xing screws
If any of the items are missing, please contact
Datapath for further instructions.
INTRODUCTION
Congratulations on the purchase of your new
Datapath Arqa TX1/RX1 unit. The unit has been
manufactured and tested to the highest standards
oering unparalleled quality and reliability. The aim of
this user guide is to assist you through the installation
of the Arqa units safely and eectively and act as a
reference guide for future use.
RX1/C
RX1/F
5
Arqa User Guide
HARDWARE
Arqa TX1
1Local DVI-in DVI connection to PC. DVI-I (VGA also supported).
2In Audio in from PC.
3RS232 RS232 connection.
4Out Audio out to PC.
5KVM-link Connection for CAT5/6/7 cable or ber cable (SFP module).
6USB USB connection.
7DC 12V power supply connection.
8DVI-out DVI connection to a monitor (optional).
9Power/Status LED Displays the status of the unit.
Local DVI - In RS232
In
DC USB KVM - Link
Out
Local DVI - Out
TX1/F
1
8 7 6
9
5
2 3 4
6
Arqa User Guide
10 In Audio in from microphone.
11 RS232 RS232 connection.
12 Out Audio out to speakers.
13 USB USB connections (keyboard and mouse).
14 DC 12V power supply connection.
15 KVM-link Connection for CAT5/6/7 cable or ber cable (SFP module).
16 DVI-out DVI-D connection to a monitor.
17 Power/status LED Displays the status of the unit.
Arqa RX1
RS232In Out
USB
DC
KVM - Link
DVI - Out
RX1/C
10 11
16 15
17
12 13 14
7
Arqa User Guide
Status LED
The status LED can illuminate Red, Orange or Green.
The table below displays the meaning of each colour.
Colour Blinking Physical
Link
Active
Connection
Video
Extended
USB
Initialisation
USB Data
Received
Identify
Command
Auto update
Mode
Red -Yes No No Update failed
Red Slow No No No
Orange -Yes Yes No
Orange Fast Update in progress
Green -Yes Yes Yes Update succeeded
Green V. fast Yes**
Red/Green V. fast Yes
RJ45 Socket LEDs*
Yellow - No
Yellow Slow Yes
Green -Yes
Green V. fast Yes
* Arqa TX1 only
** Arqa RX1 only
8
Arqa User Guide
Installing the Arqa TX1 and RX1 Units
The units can be set up to access one host computer, or to access numerous
host computers. In the case of the latter, an additional Network
Switch must be installed. With a Network Switch, each user can gain quick
access to any of the required PCs.
Single Point-to-Point Connection
Setting up an IP Matrix Switching System
Distance up to 500m ber / 150m copper
PC
Arqa TX1
Keyboard and mouse
Monitor
Arqa RX1
Arqa RX1
Screen, Keyboard
& Mouse
Arqa RX1
Screen, Keyboard
& Mouse
Arqa RX1
Screen, Keyboard
& Mouse
Arqa RX1
Screen, Keyboard
& Mouse
Arqa RX1
Screen, Keyboard
& Mouse
Network Manager Server
Network
Switch
Up to 2000
Endpoints
PC
Arqa TX1
PC
Arqa TX1
PC
Arqa TX1
PC
Arqa TX1
PC
Arqa TX1
9
Arqa User Guide
Connecting the Arqa RX1/C and TX1/C Copper Units
PC
DVI in
from PC
Audio
from PC
USB to PC
Audio
to PC
DVI out to Monitor
DVI out to Monitor
(optional)
Audio in from
Microphone
Audio out
to Speaker
USB Keyboard
and Mouse
Power Socket
12V 1A
Power Socket
12V 1A
Local DVI - In RS232
In
DC USB KVM - Link
Out
Local DVI - Out
TX1/C
RS232In Out
USB
DC
KVM - Link
DVI - Out
RX1/C
Network cable CAT5e/6.
Up to 150m/492ft
10
Arqa User Guide
Questo manuale è adatto per i seguenti modelli
3
Indice
