Datavan S-615E Manuale utente
Saturn Series
S-615E/ S-715E
Version 1.0
User Manual
2
About this Manual
Thank you for purchasing Saturn Series Touch Terminal. This terminal offers highly enhanced
features, with easy connection to various optional devices for optimal performance. This user
manual describes how to setup and connect your terminal.
Copyright
© Copyright 2019
All rights reserved. This product and related documentation are protected by copyright and
are distributed under licenses restricting their use, copying, and distribution. No part of this
documentation may be reproduced in any form by any means without prior written authorization of
the manufacturer and its licensors, if any.
Safety Information
Before you Proceed:
• Read the safety notices and the User Manual carefully before using the product.
• Keep the box and packaging in case the product needs to be shipped in the future.
• Follow the product and warning label instructions.
• Any changes or modications that do not follow the instructions in this manual will void this
product’s warranty.
Power Supply Safety Notes:
• To avoid electric shocks, disconnect the power cord from the electrical outlet before
relocating the system.
• Make sure the voltage of the power outlet conforms within voltage range of the terminal.
Failure to comply may cause the electric shock or damage to the terminal. If you are not
sure of the electricity voltage that you are using, consult your local electricity company.
• To avoid re or electric shocks, do not overload electric power outlets.
• Protect the power cord from being walked on or pinched particularly at plug, convenience
receptacles, and the point where they exit from the apparatus.
Operating Instructions
• Keep this manual for future reference.
• Keep this equipment from moisture and dust.
• Place the equipment on a stable surface before setting it up.
• If there is any of the following situation arise, notify a qualied service technician
immediately:
3
◊The power cord or plug is damaged.
◊The equipment has been dropped and damaged.
◊The equipment does not function normally.
• Do not leave the equipment in a non air-conditioned environment where the storage
temperature may go above 70°C (158°F), as this can cause damage to the equipment.
Maintenance
• Gently wipe screen with a clean soft hair lens brush, or a lint-free cloth.
• Do not apply pressure to the screen while cleaning.
• Do not spray any liquid directly onto the screen or the casing of the terminal.
• Chemical cleaners have been reported to cause damage on the screen of the terminal.
Warning and Attention
• The technical descriptions and specications of the equipment are subject to change without
notice.
• For safety reasons, wear gloves when assembling the product.
• Risk of explosion if battery is replaced by an incorrect type.
• Dispose of used batteries according to the instructions.
CE Statement
• A Class III equipment with an enclosure made of HB material and using a non-special
connector for the a.c./d.c. input has to have a marking stating the following: “Use only
power supplies listed in the user instructions” or “For applicable power supplies see user
instructions”. This statement shall also be in the user-instructions.
• If product with laser module, the class of laser should be mentioned. The warning as
attachment.
Federal Communications (FCC Statement)
This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received including interference that may cause
undesirable operation.
This equipment has been tested and found to comply within the limit of a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the manufacturer’s instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by switching the equipment on and off, the user is
encouraged to try to correct the interference by one or more of the following measures:
4
• Reorient or relocate the interference receiving antenna.
• Increase the distance of separation between the equipment and interference receiver.
• Connect the equipment to a power outlet on a circuit different from that to which the
interference receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning
CB/LVD Statement
• A Class III equipment with an enclosure made of HB material and using a non-special
connector for the a.c./d.c. input has to have a marking stating the following: “Use only
power supplies listed in the user instructions” or “For applicable power supplies see user
instructions”. This statement shall also be in the user-instructions.
• If product with laser module, the class of laser should be mentioned. The warning as
attachment.
CCC Statement
此为A级产品，在生活环境中，该产品可能会造成无线电干扰。在这种情况下，可能需要用户对干扰
采取切实可行的措施。
BSMI Statement
• 接螢幕與顯示卡所使用的防磁纜線必須確實遵守FCC規範。未獲廠商明確同意而擅自變更或修
改本裝置，可能導致使用者的使用權限失效，而無法繼續操作本設備。
• 警告使用者：這是甲類的資訊產品，在居住的環境中使用時，可能成射頻干擾，在這種情況
使用者會被要求採取某些適當的對策。
5
WEEE Notice
The WEEE logo (shown at the left) on the product or on its box indicates that this product must
not be disposed of or dumped with your other household waste. You are liable to dispose of
all your electronic or electrical waste equipment by relocating over to the specied collection
point for recycling of such hazardous waste. Isolated collection and proper recovery of your
electronic and electrical waste equipment at the time of disposal will allow us to help conserving
natural resources. Moreover, proper recycling of the electronic and electrical waste equipment
will ensure safety of human health and environment. For more information about electronic and
electrical waste equipment disposal, recovery, and collection points, please contact your local
city center, household waste disposal service, shop from where you purchased the equipment, or
manufacturer of the equipment.
6
Contents
Chapter 1: Introduction............................................................ 8
Package Contents.................................................................................... 8
Overview of Saturn Series ...................................................................... 9
Front View ...................................................................................................9
Rear View....................................................................................................9
Powering ON/OFF Saturn POS.................................................................11
Physical Dimensions .................................................................................12
Touch Terminal Specications ...................................................................16
Peripherals Specications .........................................................................18
Chapter 2: Preparing For the Installation............................. 19
Main Board Jumper Setting and Connector Denition ..................... 20
Top Side ....................................................................................................20
TOP and Bottom Side Layout Content List................................................20
Bottom Side...............................................................................................22
System Default Settings........................................................................ 28
Chapter 3: System Memory ................................................... 29
Chapter 4: BIOS Setup........................................................... 30
4-1 S-615E ................................................................................................30
4-2 S-715E ................................................................................................35
Chapter 5: Hardware Installation .......................................... 40
Replacing the Rear Covers ................................................................... 40
Adjusting the System Stand ................................................................. 41
Installing / Replacing the HDD.............................................................. 42
Installing the Customer Display (Optional) ......................................... 42
Installing the Secondary LCD Display (Optional) ............................... 44
Installing the Identication Reader(MSR/iButton/Fingerprint/RFID/M+i)
(Optional) ................................................................................................ 45
Installing the VESA Mount (Optional) .................................................. 47
7
Chapter 6: Frequently Asked Questions (FAQ) ................... 48
How do I clear CMOS?........................................................................... 48
8
INTRODUCTION
INTRODUCTION
Chapter 1
Introduction
Congratulations on your purchase of this Touch Terminal. Your easy-to-use POS terminal is
designed to help you enhance your business exibility by offering superior customer experience.
Chapter 1: Introduction
Package Contents
Before setting up your Touch Terminal, check that the package contains the following items. If any
of the items is missing or damaged, contact your vendor immediately.
Quick
Installation Guide
Touch Terminal Power Cord & Adapter Accessory Kit
Optional Accessories
Customer Display
(VFD/ LCM)
Secondary LCD
Display (8"/10"/15")
Magnetic Stripe Reader
(MSR)
MSR + iButton Reader
RFID
Radio-Frequency
Identication Reader
(RFID)
Fingerprint Reader iButton Reader
INTRODUCTION
9
Overview of Saturn Series
The gures in this section illustrate the components (including input and output ports) located at
the front and rear of your Touch Terminal.
Front View
Standard Type
Rear View
Standard Type
10
INTRODUCTION
INTRODUCTION
I/O Ports
S-615E
DC1 DC2 DK COM3 COM2 COM1
USB3.0 USB2.0
USB2 USB1 LAN VGA
Item Connector Denition
DC1 DC 12V Output
DC2 DC 12V Input
DK RJ12 Cash Drawer
COM3 RJ50 COM 3 Serial Ports
COM2 RJ50 COM 2 Serial Ports
COM1 RJ50 COM 1 Serial Ports
USB2 USB 3.0 + USB 2.0
USB1 Dual USB 2.0
LAN RJ45 Gigabit LAN
VGA DB-15 VGA Connector
S-715E
DK JS1 JS2 USB1 LAN1 CN1 COM1
VGA1 COM2 COM3
Item Connector Denition
DK RJ12 Cash Drawer
JS1 DC 24V Input
JS2 DC 12V Output
VGA1 DB-15 VGA Connector
USB1 Dual USB 2.0
LAN1 RJ45 Gigabit LAN
CN1 Dual USB 3.0
COM1 RJ50 COM 1 Serial Port
COM2 RJ50 COM 2 Serial Port
COM3 RJ50 COM 3 Serial Port
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Datavan Terminale touch
Datavan
Datavan Glamor Series Manuale utente
Datavan
Datavan G-615 Manuale utente
Datavan
Datavan G-615S Manuale utente
Datavan
Datavan Neptune N-1945 Manuale utente
Datavan
Datavan S-615W Manuale utente
Datavan
Datavan HiFive Series Manuale utente
Datavan
Datavan Wonder Series Manuale utente
Datavan
Datavan HiFive Series Manuale utente
Datavan
Datavan ARC Series Manuale utente
Datavan
Datavan Saturn Series Manuale utente
