Xtra.Mini Remote Control - User Manual
v1.0 6
3 Configuration
3.1 Shift-key Configuration Options
The Xtra.Mini Remote Control can be configured through use of the SHIFT key. This enables you to
enable or disable tracks, or change mode between fuel and EV karts.
To enter the configuration menu, hold SHIFT for around 5 seconds. The indication LED will be
illuminated constantly to indicate you are in configuration mode. In this mode, you can use the
SPD buttons to change the active tracks, and the STOP button to change between fuel and EV karts.
When you press a button, the indication LED will blink either once or twice, to indicate the selected
mode, as per the table below.
When you have entered the required configurations, press the SHIFT button again to validate your
choices. If the SHIFT button is not pressed again after 10-15 seconds of no user input, the Xtra.Mini
Remote Control will exit configuration mode, the indication LED will turn off and your changed
settings will not be saved.
3.2 Replacing The Battery
To replace the battery a standard screwdriver size/type PH0 is needed. Unscrew the backside of
the Xtra.Mini Remote control. Take care not to lose the screw and foam material. Remove the old
battery carefully. Place the new battery by sliding it in the battery holder.
