Deif MDR-2 Manuale utente

QUICK START GUIDE

•What’s in the delivery?

•Getting started

•The first steps

•PC utility software

Document no.: 4189340624B

SW version 3.0X.X or later

Multi Differential Relay, MDR-2

MDR-2 Quick Start Guide

DEIF A/S Page 2 of 16

Table of contents

1. ABOUT THIS DOCUMENT ................................................................................................... 3

GENERAL PURPOSE...................................................................................................................... 3

INTENDED USERS ......................................................................................................................... 3

CONTENTS/OVERALL STRUCTURE..................................................................................................3

2. WARNINGS AND LEGAL INFORMATION........................................................................... 4

LEGAL INFORMATION AND RESPONSIBILITY.....................................................................................4

ELECTROSTATIC DISCHARGE AWARENESS .....................................................................................4

SAFETY ISSUES............................................................................................................................4

DEFINITIONS ................................................................................................................................4

3. WHAT’S IN THE DELIVERY?............................................................................................... 5

STANDARD DELIVERY....................................................................................................................5

OPTIONAL DELIVERY..................................................................................................................... 6

4. GETTING STARTED ............................................................................................................. 7

CONNECTING THE DEVICES...........................................................................................................7

BASIC WIRING............................................................................................................................... 8

5. THE FIRST STEPS..............................................................................................................11

BASIC AC VALUES......................................................................................................................11

6. PC UTILITY SOFTWARE....................................................................................................13

INSTALLATION ............................................................................................................................ 13

GETTING CONNECTED TO THE UNIT .............................................................................................14

READ PARAMETERS FROM THE DEVICE ........................................................................................15

BASIC CONFIGURATION OF A DEVICE USING THE UTILITY SOFTWARE ..............................................16

MDR-2 Quick Start Guide

DEIF A/S Page 3 of 16

1. About this document

General purpose

This document is the Quick Start Guide for the Multi-line 2 product MDR-2. The general purpose

of the document is to help the user with the first steps of installing and using the unit.

Intended users

This Quick Start Guide is mainly intended for the panel builder in charge. On the basis of this

document, the panel builder designer will give the electrician the information he needs in order

to get started to install the unit. For detailed electrical drawings, the Designer’s Reference

Handbook must be used.

Contents/overall structure

This document is divided into chapters, and in order to make the structure simple and easy to

use, each chapter will begin from the top of a new page.

Please make sure that you also read the Designer’s Reference Handbook

before starting to work with the Multi-line 2 controller and the gen-set to be

controlled. Failure to do this could result in human injury or damage to the

equipment.

MDR-2 Quick Start Guide

DEIF A/S Page 4 of 16

2. Warnings and legal information

This chapter includes important information about general legal issues relevant in the handling

of DEIF products. Furthermore, some overall safety precautions will be introduced and

recommended. Finally, the highlighted notes and warnings, which will be used throughout this

document, are presented.

Legal information and responsibility

DEIF takes no responsibility for installation or operation of the generator set. If there is any

doubt about how to install or operate the generator controlled by the unit, the company

responsible for the installation or the operation of the set must be contacted.

Electrostatic discharge awareness

Sufficient care must be taken to protect the terminals against static discharges during the

installation. Once the unit is installed and connected, these precautions are no longer

necessary.

Safety issues

Installing the unit implies work with dangerous currents and voltages. Therefore, the installation

of the unit should only be carried out by authorised personnel who understand the risks involved

in the working with live electrical equipment.

Definitions

Throughout this document a number of notes with helpful user information will be presented. To

ensure that these are noticed, they will be highlighted in order to separate them from the

general text.

Note symbol

Warnings

Be aware of the hazardous live currents and voltages. Do not touch any AC

measurement inputs as this could lead to injury or death.

The notes provide general information which will be helpful for the reader to

bear in mind.

The warnings indicate a potentially dangerous situation which could result in

death, personal injury or damaged equipment if certain guidelines are not

followed.

The units are not to be opened by unauthorised personnel. If opened anyway, the

warranty will be lost.

MDR-2 Quick Start Guide

DEIF A/S Page 5 of 16

3. What’s in the delivery?

Standard delivery

The main unit

Standard display unit, DU-2

MDR-2 Quick Start Guide

DEIF A/S Page 6 of 16

Optional delivery

Display cable, 3 m (option J1)

Display cable, 6 m (option J2)

Display cable, 1 m (option J6)

MDR-2 Quick Start Guide

DEIF A/S Page 7 of 16

4. Getting started

Connecting the devices

Connecting the display to the main unit

Connect the SUB-D display cable to the main unit and the display unit as shown in the below

picture.

MDR-2 Quick Start Guide

DEIF A/S Page 8 of 16

Basic wiring

AC wiring

MDR-2 Quick Start Guide

DEIF A/S Page 9 of 16

AC wiring – option C4

Only -/1A CTs can be used with option C4.

MDR-2 Quick Start Guide

DEIF A/S Page 10 of 16

DC wiring

Indice

Altri manuali Deif Staffetta

Deif

Deif uni-line Series Istruzioni e ricette

Deif

Deif MVR-200 Series Manuale utente

Manuali Staffetta popolari di altre marche

Shelly

Shelly Pro Series Manuale utente

GE MVAX 11 Manuale utente

ABB

ABB RELION REF615R Manuale utente

Pilz

Pilz PNOZ X10 Manuale del proprietario

ABB

ABB SPAJ 142 C Manuale elenco delle parti

Kemo Electronic

Kemo Electronic B197 Manuale utente

Seg

Seg MRM3 Manuale utente

Basler

Basler BE1-700C Manuale utente

CD Automation

CD Automation REVEX 2PH 280A Manuale utente

Ruelco

Ruelco 1S04 Manuale utente

Basler

Basler V3E Z1P B2C1F Manuale utente

Doepke

Doepke Dupline DSM 2 Manuale utente

Siemens

Siemens SIRIUS 3RT1966-4D Manuale utente

GE DGP Manuale utente

Kyongbo Electronics

Kyongbo Electronics GDR-D01 Manuale utente

Siemens

Siemens SIPROTEC 4 Manuale utente

Siemens

Siemens BD2-AK03X/FS Series Manuale utente

Leuze

Leuze MSI-SR5B Manuale utente