Deliberant APC 5M-18 V2 Manuale utente

APC 5M-18 V2

Quick Installation Guide

Revision 1.2

21 October 2011

deliberant Page 2

this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated

into any language in any form by any means without the written permission of Deliberant.

Notice

Deliberant reserves the right to change specifications without prior notice.

While the information in this manual has been compiled with great care, it may not be deemed an

assurance of product characteristics. Deliberant shall be liable only to the degree specified in the

terms of sale and delivery.

The reproduction and distribution of the documentation and software supplied with this product and

the use of its contents is subject to written authorization from Deliberant.

Trademarks

Deliberant logo is trademark of Deliberant LLC.

All other registered and unregistered trademarks in this document are the sole property of their

respective owners.

Quick Installation Guide Contents

deliberant Page 3

Contents

Copyright.............................................................................................................................................2

Notice ..................................................................................................................................................2

Trademarks.........................................................................................................................................2

CONTENTS ...........................................................................................................................................3

INTRODUCTION....................................................................................................................................4

FCC Warning.......................................................................................................................................4

FCC Caution....................................................................................................................................4

FCC Radiation Exposure Statement ...............................................................................................4

Antenna Installation .........................................................................................................................4

Antenna Compliance .......................................................................................................................4

CE Mark Warning................................................................................................................................5

R&TTE Compliance Statement...........................................................................................................5

Safety...............................................................................................................................................5

EU Countries Intended for Use........................................................................................................5

EU Countries Not Intended for Use.................................................................................................5

ABOUT THIS GUIDE.............................................................................................................................6

Prerequisite Skills and Knowledge......................................................................................................6

Definitions, Acronyms and Abbreviations............................................................................................6

Technical Support ...............................................................................................................................6

Contact Us...........................................................................................................................................6

INSTALLATION.....................................................................................................................................7

Package Contents...............................................................................................................................7

Hardware Introduction.........................................................................................................................8

LEDs................................................................................................................................................8

Assembling and mounting the APC 5M-18 V2....................................................................................9

ACCESS THE APC 5M-18 V2.............................................................................................................11

Connection via WEB Browser...........................................................................................................11

Resettingto Factory Defaults............................................................................................................12

Quick Installation Guide Introduction

deliberant Page 4

Introduction

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the interference by one of

the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

FCC Caution

To assure continued compliance, any changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate this equipment.

FCC Radiation Exposure Statement

To comply with FCC RF exposure requirements in section 1.1307, a minimum separation distance of

3.9 feet is required between the antenna and all occupational persons, and a minimum separation

distance of 8.7 feet is required between the antenna and all public persons.

Antenna Installation

WARNING: It is installer’s responsibility to ensure that when using the authorized antennas in the

United States (or where FCC rules apply), only those antennas certified with the product are used.

The use of any antenna other than those certified with the product is expressly forbidden in

accordance to FCC rules CFR47 part 15.204. The installer should configure the output power level of

antennas, according to country regulations and per antenna type. Professional installation is required

of equipment with connectors to ensure compliance with health and safety issues.

Antenna Compliance

The APC 5M-18 V2 radio module contains internal antenna.

Quick Installation Guide Introduction

deliberant Page 5

CE Mark Warning

This is a Class A product. In a domestic environment this product may cause radio interference in

which case the user may be required to take adequate measures.

R&TTE Compliance Statement

This equipment complies with all the requirements of the Directive 1999/5/EC of the European

Parliament and the Council of 9 March 1999 on Radio Equipment and Telecommunication Terminal

Equipment and the Mutual Recognition of their Conformity (R&TTE).

The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications Terminal

Equipment and Satellite Earth Station Equipment) As of April 8, 2000.

Safety

This equipment is designed with the utmost care for the safety of those who install and use it.

However, special attention must be paid to the dangers of electric shock and static electricity when

working with electrical equipment. All guidelines of this manual and of the computer manufacturer

must therefore be allowed at all times to ensure the safe use of the equipment.

EU Countries Intended for Use

The ETSI version of this device is intended for home and office use in Austria, Belgium, Denmark,

Finland, France (with Frequency channel restrictions), Germany, Greece, Ireland, Italy, Luxembourg,

The Netherlands, Portugal, Spain, Sweden and United Kingdom.

The ETSI version of this device is also authorized for use in EFTA member states Iceland,

Liechtenstein, Norway and Switzerland.

EU Countries Not Intended for Use

None.

Quick Installation Guide About this Guide

deliberant Page 6

About this Guide

Prerequisite Skills and Knowledge

To use this document effectively, you should have a working knowledge of Local Area Networking

(LAN) concepts and wireless Internet access infrastructures.

Definitions, Acronyms and Abbreviations

The following typographic conventions and symbols are used throughout this document:

Additional information that may be helpful but which is not required.

Important information that should be observed.

bold

Menu commands, buttons, input fields, links, and configuration keys are displayed in bold

italic

References to sections inside the document are displayed in italic.

code

File names, directory names, form names, system-generated output, and user typed

entries are displayed in constant-width type

Technical Support

If you encounter problems when installing or using this product, please consult the Deliberant website

at www.deliberant.com for:

Direct contact to the Deliberant support centers.

Frequently Asked Questions (FAQ).

Download area for the latest software, user documentation and product updates.

EU office:

UAB WILIBOX

Veiveriu 150 - IIIa.

Kaunas, LT-46391

Lithuania

[email protected]

US office:

Deliberant

138 Mountain Brook Drive

Canton, GA 30115

United States of America

For support: supp[email protected]

For sales enquiries: sales@deliberant.com

Quick Installation Guide Installation

deliberant Page 7

Installation

This chapter provides installation instructions for the hardware components of the APC 5M-18 V2.

Package Contents

The figure below displays APC 5M-18 V2 package contents.

Figure 1 –APC 5M-18 V2 Package Contents

Item

Component Name

Quantity

APC 5M-18 V2 Quick Installation Guide

APC 5M-18 V2 enclosure

Power adapter

PoE injector

Gland cap for the CAT5 Ethernet cable

Rubber gasket for the CAT5 Ethernet cable

Mounting bracket for wall/pole mount

U bolt M6 for pole mounting

Hexagon bolt M6 x 18 for wall/pole mount

Hexagon lock nut M6

Anti-slip washer M6

If any of these items are missing or damaged, please contact your reseller.

Quick Installation Guide Installation

deliberant Page 8

Hardware Introduction

APC 5M-18 V2 is housed in a plastic enclosure ensuring a reliable sealing in a wide range of

temperature and has an integrated 18dBi panel antenna.

Figure 2 –APC 5M-18 V2 Overview

The panel of the APC 5M-18 V2 contains:

Ethernet/Power connection in the form of passive PoE through standard Ethernet cable

6 LEDs: power LED, LAN activity LED and 4 LEDs for device RSSI level indication

Grounding stud

The APC 5M-18 V2 has label with the following information:

Figure 3 –APC 5M-18 V2 Label

The label of the APC 5M-18 V2 contains:

Model name. The official model name is APC 5M-18 V2.

Serial Number

Radio MAC address

LAN MAC address

FCC ID: UB8-APC5M18V2

IC ID: 6607-APC5M18V2

LEDs

The APC 5M-18 V2 has 6 LEDs located on the side panel: power, LAN and 4 RSSI LEDs. The

various states of the LEDs indicate different connection operations as follows:

LED

Color

Status

Indication

Power

Green

APC 5M-18 V2 is active/working

Off

No power on APC 5M-18 V2

LAN

Green

LAN connection exists.

Blinking

Indicates the traffic on LAN interface.

Off

No LAN connection.

RSSI (1, 2, 3, 4)

Yellow

The RSSI level has reached the appropriate threshold

level (default RSSI threshold levels: 10, 25, 35, 50)

Off

The RSSI level has not reached the appropriate

threshold level

Quick Installation Guide Installation

deliberant Page 9

Assembling and mounting the APC 5M-18 V2

The APC 5M-18 V2 units are supplied with mounting hardware for pole with diameters in the range

40mm to 50mm installations. After the unit is attached, its position is fixed with the single bolt. Follow

the steps for APC 5M-18 V2 assembling:

Step 1. Make sure that the APC unit is powered-off.

Step 2. Ground the APC 5M-18 V2 unit. The unit must be properly grounded to protect against

lightning. The grounding wire must be attached to the grounding stud on the unit (refer

at the Figure 2 –APC 5M-18 V2 Overview).

If the unit is attached to a metal pipe which is earth-grounded, no further grounding is

required.

Step 3. Attach mounting hardware (item C in the Figure 1 –APC 5M-18 V2 Package Contents)

to the unit and tighten with the nut and bolt (items I and J in the Figure 1 –APC 5M-18

V2 Package Contents).

For wall mounting, first attach the mounting bracket to the wall and then connect the unit

together and tighten the nut and bolt.

It is recommended not to tighten the unit to its mounting hardware until the alignment

process of the antenna is complete.

Step 4. For pole mounting attach APC 5M-18 V2 on pole with U bolt (items H and J in the

Figure 1 –APC 5M-18 V2 Package Contents) as shown in picture below:

Step 5. Connect Ethernet cable into the APC 5M-18 V2 then insert a rubber gasket (item F in

the Figure 1 –APC 5M-18 V2 Package Contents) into CAT5 Ethernet connector gland

and tighten with gland cap (item E in the Figure 1 –APC 5M-18 V2 Package Contents)

as displayed below:

Quick Installation Guide Installation

deliberant Page 10

It is recommended to use shielded STP Ethernet cable to reduce exposure of the

electromagnetic noise.

Step 6. Connect power adapter into PoE injector together with UTP cables as displayed in

picture below:

Step 7. Power-up the unit. The green Power LED must be on (refer at the respective section

LEDs). Depending on link quality, up to four yellow LEDs will switch on indicating that

link between two units was established successfully.

Step 8. After the link was established, align the antenna for the maximum performance. Run

the Antenna Alignment tool in the Web management interface and move the unit in

the horizontal and vertical planes until the maximum RSSI visible on the Antenna

Alignment graph is achieved. After the maximal RSSI is reached, tighten down the unit

in the optimum position.

Avoid standing directly in front of an operating antenna while aligning.

Indice

Altri manuali Deliberant Punto di accesso wireless

Deliberant

Deliberant APC Propeller 2 Manuale utente

Deliberant

Deliberant APC Istruzioni per il montaggio

Deliberant

Deliberant FWBD0501 Manuale utente

Deliberant

Deliberant APC 2Mi Manuale utente

Manuali Punto di accesso wireless popolari di altre marche

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuale utente

Ubiquiti

Ubiquiti NanoStation NSM2 Manuale utente

Cisco

Cisco Aironet 1550 Series Manuale utente

Aruba

Aruba IAP-335 Manuale utente

Advantek Networks

Advantek Networks AWN-AP-54MR Manuale utente

IP-COM

IP-COM AP355 Manuale utente

Buffalo

Buffalo AirStation WLA-L11G Manuale utente

EnGenius

EnGenius EnStationACv2 Manuale utente

D-Link

D-Link DAP-3662 Manuale utente

xG Technology

xG Technology xMax CN1300 Manuale utente

Widelink

Widelink ezWave WAP-1100 Series Manuale utente

Edimax

Edimax CAP1200 Manuale utente

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuale utente

Aruba

Aruba AP-203R Manuale utente

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuale utente

CreatComm

CreatComm TB5F Manuale utente

SineDigital

SineDigital MW-1500AP(H) Manuale utente

TP-Link

TP-Link AP9650 V1 Manuale utente