Dell D1918H Manuale utente
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a
product. Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any
attempt to service or repair the product or products dealt with in this service information by anyone else could result in
serious injury or death.
LED MONITOR No. D1918H
D1918H Service Manual
-1-
02/28/2017
1. Assembly and Disassembly Procedures
Assembly—SOP D1918H
Assembly procedures
Preparation before assembly
1. clean the room for work
2. Identify the area for material
3. Prepare the implement, equipments, materials as bellow:
1) Press Fixture
2) Work ing table
3) Screw-Driver
4) knife
5) glove
6) cleaning cloth
7) ESD protection
Step1
1. Insert the LVDS cable to M/B
2. Assemble M/B into the SHIELD PLATE
Step2
1
2
D1918H Service Manual
-2-
02/28/2017
1. Insert wireharness from to M/B
2. Assemble M/B by locking 5 screws(M3*6)-(one ground screw)
3. Foam on the HDMI cable（EMI Solution）
Step3
1. Stick the K/B FFC cable on the M/B
Step4
groun
d
screw
groun
d
screw
D1918H Service Manual
-3-
02/28/2017
1. Isolation hood positioning
2.Chapaixian LVDS
Step5
1.Aluminum foil and anti-static adhesive tape
D1918H Service Manual
-4-
02/28/2017
Step6
1. Lock the hexagonal screws
Step7
1.Assembly the back cover into the panel
D1918H Service Manual
-5-
02/28/2017
Step8
1.Assembly the back cover by locking 1 screws(M3*8)
Step9 Assembling support
Disassembly—SOP D1918H
D1918H Service Manual
-6-
02/28/2017
Disassembly procedures
Preparation before disassembly
4. clean the room for work
5. Identify the area for material
6. Check the position that the monitors be placed and the quantify of the
monitor ;prepare the area for material flow,according to the actual condition
plan the disassemble layout
7. Prepare the implement, equipments, materials as bellow:
1) Press Fixture
2) Work ing table
3) Screw-Driver
4) knife
5) glove
6) cleaning cloth
7) ESD protection
Step1 disassemble the stand
Step2 Remove rear cabinet screw
D1918H Service Manual
-7-
02/28/2017
Step3 Disassemble CABI Back
D1918H Service Manual
-8-
02/28/2017
Step4
1. Take off the AL SHIELDING TAPES and pull out the LVDS cable
2. Remove the press button in the front K/B
Step5 Unlock the screws and
D1918H Service Manual
-9-
02/28/2017
Step6
1. Disassemble the K/B and pull out the FFC cable
Step7
1.Unlock the screws and take out the M/B
2. Foam demolition
Step8 Pull out the LVDS cable
Altri manuali per D1918H
2
Altri manuali Dell Monitor
Dell
Dell SE2719HR Manuale utente
Dell
Dell D1901N Manuale utente
Dell
Dell P2210 Manuale utente
Dell
Dell SX2210T Istruzioni utente
Dell
Dell E1713S Manuale utente
Dell
Dell OptiPlex 7090 Ultra Manuale utente
Dell
Dell UltraSharp U2419HS Manuale utente
Dell
Dell UltraSharp 1704FPV Manuale utente
Dell
Dell SE3218H Manuale utente
Dell
Dell S2421HS Manuale utente
Dell
Dell E178WFPC Manuale utente
Dell
Dell E2211H Scheda tecnica
Dell
Dell U2723QE Manuale utente
Dell
Dell P2012H Manuale elenco delle parti
Dell
Dell UltraSharp 2009W Manuale utente
Dell
Dell M570 Manuale utente
Dell
Dell SE2416HM Manuale utente
Dell
Dell E173FP - 17" LCD Monitor Manuale utente
Dell
Dell U2520DR Manuale utente
Dell
Dell S2240M Manuale utente
