Dell D3216H Manuale utente

Regulatory model: D3216Ho

Dell D3216H

User’s Guide

Notes, cautions, and warnings

NOTE: A NOTE indicates important information that helps you make better use of

your computer.

CAUTION: A CAUTION indicates potential damage to hardware or loss of data if

instructions are not followed.

WARNING: A WARNING indicates a potential for property damage, personal

injury, or death.

This product is protected by U.S. and international copyright and intellectual property laws.

Dell™and the Dell logo are trademarks of Dell Inc. in the United States and/or other jurisdictions.

All other marks and names mentioned herein may be trademarks of their respective companies.

2015– 11

Rev. A00

Contents

Safety Precautions....................................... 4

First Setup .............................................. 5

Installing the LCD Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Installing the Stand Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Disconnecting the Stand Base . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Quick Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Front/-Rear View of the Product . . . . . . . . . . . . . . . . . . . . . . . 7

Using On Screen Display (OSD) Functions ................. 8

Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Shortcut Function from the button(s) . . . . . . . . . . . . . . . . . . . . . . 9

Supporting Timing Modes............................... 12

Technical Information .................................. 13

Technical Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Care and Maintenance .................................. 14

Care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Appendix .............................................. 16

Contacting Dell. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

4 Safety Precautions

Safety Precautions

This monitor is manufactured and tested on a ground principle that a user’s

safety comes first. However, improper use or installation may result danger to

the monitor as well as to the user. Carefully go over the following WARNINGS

before installation and keep this guide handy.

• This monitor should be operated only at the correct power sources indicated

on the label on the rear end of the monitor. If you’re unsure of the power

supply in your residence, consult your local dealer or power company.

• Do not try to repair the monitor yourself as it contains no user-serviceable

parts. The monitor should only be repaired by a qualified technician.

• Do not remove the monitor cabinet. There are high-voltage parts inside that

may cause electric shock to human bodies, even when the power cord is

disconnected.

•Stop using the monitor if the cabinet is damaged. Have it checked by a service

technician.

•Put your monitor only in a clean, dry environment. Unplug the monitor

immediately if it gets wet and contact Dell.

•Always unplug the monitor before cleaning it. Clean the cabinet with a clean,

dry cloth. Apply non-ammonia based cleaner onto the cloth, not directly onto

the glass screen.

•Keep the monitor away from magnetic objects, motors, TV sets, and

transformer.

•Do not place heavy objects on the cables.

•For pluggable equipment, the Socket-outlet shall be installed near the

equipment and shall be easily accessible.

•For displays with glossy bezels the user should consider the placement of the

displays as the bezel may cause disturbing reflections from surrounding light

and bright surfaces.

•Due to safety concerns, if the VESA mounting kit is purchased separately,

please make sure the mounting kit is UL-Listed, and replaceable only by

service personnel.

WARNINGS

First Setup 5

First Setup

Congratulation for purchasing this monitor of high performance!

This monitor comes with the following accessories :

• LCD Monitor • Base

• AC Power Cord • DVI Cable (24 pin)

• Drivers and Documentation media • Quick Setup Guide

• Safety and Regulatory Information

Installing the LCD Monitor

Installing the Stand Base

1. Place the monitor face down on a flat leveled surface.

2. Align the monitor with the opening in the base.

3. Turn the screws (x4) clockwise to attach the base to the monitor.

4. Please ensure the monitor is attached to the base and the screw is fully

tightened.

Disconnecting the Stand Base

1. Place the monitor face down on a flat leveled surface.

2. Turn the screw counterclockwise to remove the screws (x4) that secure your

monitor to the base.

6 First Setup

Quick Installation

1. Connect Video cable

Make sure both monitor and computer are powered OFF. Connect the video

cable (DVI cable) to the computer, then to the monitor.

or connect VGA cable (optional)

Connect the VGA cable from VGA output of computer to the VGA input of

the monitor.

2. Connect Power cord

Connect the power cord to a properly grounded AC outlet, then to the

monitor.

3. Power-ON computer and monitor

Power-ON the computer, then Power-ON the monitor.

4. Windows users: Setting the Timing Mode (Resolution and Refresh Rate)

Example: 1920 x 1080 @ 60 Hz

•For Windows® 7:

Right-click on the desktop > Screen Resolution > Resolution. Set the

resolution.

•For Windows® 8 or Windows® 8.1:

Select the desktop tile to switch to classic desktop. Right-click on the

desktop > Screen Resolution > Resolution. Set the resolution.

•For Windows® 10:

Right-click on the desktop > Display settings > Advanced display settings >

Resolution. Set the resolution.

Refresh Rate (vertical frequency) See your graphic card’s user guide for

instructions.

Example:

Power cable DVI cable

VGA cable

First Setup 7

Front/-Rear View of the Product

1 LED Indicator 7 Scroll Down/ Decrease/ Video

Mode Adjustment

2 Power ON/OFF 8 Scroll Up/ Increase/ Picture

Mode select

3 Conﬁrm Select/ Input Select 9 Power input

4 OSD Menu On/O 10 DVI input (DVI 24 pin)

5 ECO Adjust 11 VGA input (D-Sub 15 pin)

6 Contrast/Brightness Adjust

2 3 4 5 6 7 8 9

10 11

8 Using On Screen Display (OSD) Functions

Using On Screen Display (OSD) Functions

Main Menu

Dell D3216H

AUTOMATIC ADJUSTMENT

CONTRAST/BRIGHTNESS

INPUT SOURCE

COLOR SETTING

INFORMATION

MANUAL IMAGE ADJUSTMENT

MENU SETTING

MEMORY RECALL

1:EXIT SELECT:2

Display main menu

Exit from OSD menu

Manual adjust mode select for D-SUB, DVI mode

Select the desired item when in OSD menu

When not in OSD menu, directly enters Video Mode Adjust-

ment

Select the desired item when in OSD menu

When not in OSD menu, directly enters Picture Mode

Manual adjust Contrast or Brightness

ECO Manual adjust mode select for Standard, Optimize, Conserve

+Recall both of Contrast and Brightness (when not in OSD

menu)

+Power Lock, press 10 seconds to lock (when not in OSD

menu)

+OSD Lock, press 10 seconds to lock (when not in OSD menu)

Using On Screen Display (OSD) Functions 9

Shortcut Function from the button(s)

AUTOMATIC

ADJUSTMENT

To auto adjust Horizontal Position, Vertical Position,

Phase (Fine Tune) and Clock (H. Size) of the screen.

Note: Only available for VGA input.

CONTRAST/

BRIGHTNESS

To manually adjust the Contrast and Brightness of

screen image.

• CONTRAST To adjust the foreground white level of screen im-

age.

• BRIGHTNESS To adjust the luminance of the video.

INPUT SOURCE When Input Select is pressed, change Input signal to

D-SUB or DVI.

COLOR SETTING

To select the color for improving brightness and

color saturation between COOL, NORMAL, WARM

and USER COLOR.

• COOL Adds blue to screen image for cooler white.

• NORMAL Adds red to screen image for warmer white and

richer red.

• WARM Adds green to screen image for a darker color.

• USER COLOR

Individual adjustments for RED (R), GREEN (G), BLUE

(B).

1. Press button to select the desired color.

2. Press ▼or ▲button to adjust selected color.

INFORMATION

To display the information, regarding the current

input signal coming from the graphic card in your

computer.

Note: See your graphic card user guide for more

information about changing the resolution and

refresh rate.

MANUAL IMAGE

ADJUSTMENT

To manually adjust the H. / V. POSITION, HORIZON-

TAL SIZE, FINE TUNE, SHARPNESS, DCR, OD, VIDEO

MODE ADJUSTMENT, ECO and PICTURE MODE.

• H. / V. POSITION

To adjust the horizontal and vertical position of the

video.

• H. POSITION: ▲: move screen to the right, ▼:

move screen to the left.

• V. POSITION: ▲: move screen up, ▼: move screen

down.

Note: Only available for VGA input.

10 Using On Screen Display (OSD) Functions

• HORIZONTAL

SIZE

To adjust the width of the screen image.

▲: increase the width of screen image, ▼: decrease

the width of screen image.

Note: Only available for VGA input.

• FINE TUNE

To adjust the delay time of data and clock.

Press ▲or ▼to adjust to your preference.

Note: Only available for VGA input.

• SHARPNESS To adjust the clarity of a non-Full HD Resolution

(1920x1080) signal with ▲or ▼button.

• DCR

To detect the distribution of the visual signals inputs,

and create an optimized contrast.

Note: CONTRAST, BRIGHTNESS and PICTURE

MODE adjustment will be disabled when DCR is

active.

• OD

Allows the user to change the Overdrive strength to

improve the quality of motion pictures.

Press ▲or ▼key to adjust the Overdrive strength in

three levels.

• VIDEO MODE

ADJUSTMENT

To select the video mode from FULL SCREEN or

ASPECT RATIO.

• ECO

Allows the user to change the energy-saving set-

tings.

Press ▲or ▼key to adjust the ECO Mode in three

levels.

• PICTURE MODE

Provides an optimum display environment depend-

ing on the contents displayed. It contains 5 user-

selectable presets.

• Standard is for general windows environment and

monitor default setting.

• Game optimized for PC game environment.

• Cinema optimized for movie and video environ-

ment.

• Scenery optimized for displaying outdoor scenery

images.

• Text optimized for text editing and viewing in a

word processing environment.

Note: CONTRAST, BRIGHTNESS, DCR and ECO

adjustment will be disabled when PICTURE MODE is

active.

Indice

Altri manuali Dell Monitor

Dell

Dell E1913S Manuale utente

Dell

Dell U3011 Manuale utente

Dell

Dell P992 Manuale utente

Dell

Dell UltraSharp 1800FP Manuale utente

Dell

Dell SP2008WFP - 20" LCD Monitor Manuale utente

Dell

Dell S1909WN Manuale utente

Dell

Dell ST2421LB Manuale utente

Dell

Dell P2214H Manuale utente

Dell

Dell S3222HG Manuale utente

Dell

Dell P1917S Manuale utente

Dell

Dell UltraScan P790 Scheda tecnica

Dell

Dell E2722H Manuale utente

Dell

Dell E153FPc Manuale utente

Dell

Dell 2707WFP - UltraSharp - 27" LCD Monitor Manuale utente

Dell

Dell IN1930 Manuale utente

Dell

Dell UltraSharp 24 U2422H WOST Manuale utente

Dell

Dell IN1910N - 18.5" LCD Monitor Manuale utente

Dell

Dell SE2717H Manuale utente

Dell

Dell G2723H Manuale utente

Dell

Dell P2721Q Istruzioni per l’uso

Dell

Dell 1401FP Manuale utente

Dell

Dell XPS 17 9720 Manuale di istruzioni

Dell

Dell S1909WX Manuale di istruzioni

Dell

Dell E157FPc Manuale utente

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Philips

Philips 107C64 Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione

LG M1950D-PZ Manuale utente

Sceptre

Sceptre D40 Manuale utente

Hunt Electronic

Hunt Electronic HCD-15AH Manuale utente