Delta DVP-FEN01 Manuale utente
www.deltaww.com
DVP-FEN01 Ethernet
Communication Card
Operation Manual
2014-03-05
Industrial Automation Headquarters
Delta Electronics, Inc.
Taoyuan Technology Center
No.18, Xinglong Rd., Taoyuan City,
Taoyuan County 33068, Taiwan
TEL: 886-3-362-6301 / FAX: 886-3-371-6301
Asia
Delta Electronics (Jiangsu) Ltd.
Wujiang Plant 3
1688 Jiangxing East Road,
Wujiang Economic Development Zone
Wujiang City, Jiang Su Province, P.R.C. 215200
TEL: 86-512-6340-3008 / FAX: 86-769-6340-7290
Delta Greentech (China) Co., Ltd.
238 Min-Xia Road, Pudong District,
ShangHai, P.R.C. 201209
TEL: 86-21-58635678 / FAX: 86-21-58630003
Delta Electronics (Japan), Inc.
Tokyo Ofce
2-1-14 Minato-ku Shibadaimon,
Tokyo 105-0012, Japan
TEL: 81-3-5733-1111 / FAX: 81-3-5733-1211
Delta Electronics (Korea), Inc.
1511, Byucksan Digital Valley 6-cha, Gasan-dong,
Geumcheon-gu, Seoul, Korea, 153-704
TEL: 82-2-515-5303 / FAX: 82-2-515-5302
Delta Electronics Int’l (S) Pte Ltd.
4 Kaki Bukit Ave 1, #05-05, Singapore 417939
TEL: 65-6747-5155 / FAX: 65-6744-9228
Delta Electronics (India) Pvt. Ltd.
Plot No 43 Sector 35, HSIIDC
Gurgaon, PIN 122001, Haryana, India
TEL : 91-124-4874900 / FAX : 91-124-4874945
Americas
Delta Products Corporation (USA)
Raleigh Ofce
P.O. Box 12173,5101 Davis Drive,
Research Triangle Park, NC 27709, U.S.A.
TEL: 1-919-767-3800 / FAX: 1-919-767-8080
Delta Greentech (Brasil) S.A.
Sao Paulo Ofce
Rua Itapeva, 26 - 3° andar Edicio Itapeva One-Bela Vista
01332-000-São Paulo-SP-Brazil
TEL: 55 11 3568-3855 / FAX: 55 11 3568-3865
Europe
Deltronics (The Netherlands) B.V.
Eindhoven Ofce
De Witbogt 20, 5652 AG Eindhoven, The Netherlands
TEL: 31-40-2592850 / FAX: 31-40-2592851
DVP-0206820-01
*We reserve the right to change the information in this manual without prior notice.
i
DVP-FEN01 Ethernet Communication Card
Operation Manual
Contents
Chapter 1 Introduction
1.1 Functions..............................................................................................................1-2
1.2 Functional Specifications......................................................................................1-3
Chapter 2 Dimensions and Profile
2.1 Dimensions...........................................................................................................2-2
2.2 Profile...................................................................................................................2-2
2.3 Indicators..............................................................................................................2-2
2.4 RJ45 Connector ...................................................................................................2-3
2.5 RS-232 Connector................................................................................................2-3
2.6 Troubleshooting....................................................................................................2-3
Chapter 3 Installation and Wiring
3.1 Installation............................................................................................................3-2
3.2 Connecting a Network..........................................................................................3-3
Chapter 4 Control Registers
4.1 Table of Control Registers in DVP-FEN01...........................................................4-2
4.2 Specifications and Functions................................................................................4-3
4.3 Communication Card Number..............................................................................4-4
4.4 Introduction of ETHRW ........................................................................................4-5
Chapter 5 Setting DVP-FEN01 by Means of Software
5.1 Setting Communication and Searching for Modules............................................5-2
5.2 Basic Settings.....................................................................................................5-10
5.3 Data Exchange...................................................................................................5-14
5.4 IP Filter...............................................................................................................5-15
5.5 Setting a Password ............................................................................................5-16
5.6 Restoring DVP-FEN01 to Its Factory Settings ...................................................5-17
ii
Chapter 6 Examples
6.1 Connecting WPLSoft to a DVP-EH3 Series PLC by Means of the Ethernet Port on
DVP-FEN01 ......................................................................................................... 6-2
6.2 Connecting WPLSoft to a DVP-EH3 Series PLC by Means of the RS-232 Port on
DVP-FEN01 ......................................................................................................... 6-5
6.3 Setting/Removing a Password............................................................................. 6-8
6.4 Lost Password (Restoring DVP-FEN01 to Its Factory Settings by Means of RS-232)
........................................................................................................................... 6-12
6.5 Setting an IP Filter.............................................................................................. 6-15
6.6 Always Enabling Data Exchange ....................................................................... 6-17
6.7 Enabling Data Exchange by Means of a Program ............................................. 6-19
6.8 Enabling Data Exchange by Means of the RUN/STOP switch on a PLC........... 6-21
6.9 Application of ETHRW ....................................................................................... 6-23
DVP-FEN01 Ethernet Communication Card Operation Manual
Thanks for using the communication card DVP-FEN01. To ensure that the product is correctly installed and
operated, users need to read the operation manual carefully before they use DVP-FEN01.
DVP-FEN01 is an Ethernet communication card. It supports a standard Modbus TCP communication protocol.
It can pass the Modbus TCP data received to the PLC to which it is connected. Besides, the PLC to which it is
connected can send Modbus TCP data to other devices on Ethernet. It supports Delta PLC software. Users can
use Ethernet or a RS-232 cable to upload the program in a PLC/download a program to a PLC and monitor a
program through DVP-FEN01.
The operation manual provides functional specifications, and introduces installation, basic operation and
setting, and communication protocols.
The product is the communication card used used with a PLC. If users want to use this product, they have
to install it in a DVP-EH3 series PLC. (It only supports a DVP-EH3 series PLCs whose firmware version is
1.12 or above.)
Please refer to an instruciton sheet for more inforation about the environment in which a PLC can be
installed and points for attention.
Please check the wiring of a PLC before the PLC is powered. Do not touch any terminal when a PLC is
powered.
In order to prevent the product from being damaged, or prevent staff from being hurt, users need to read
the operation manual carefully, and follow the instructions in the manual.
1.1 Functions
It provides DVP-EH3 series PLCs with an Ethernet communication function.
It is equipped with an Ethernet port and an RS-232 port.
The Ethernet port automatically detects the transmission speed of 10/100 Mbps.
The Ethernet protocols it supports are ARP, IP, TCP, UDP, DHCP, and Modbus TCP.
There are eight Modbus TCP clients (for sending packets), and four Modbus TCP servers (for receiving
packets).
It supports four IP filters. The IP addresses which can not be accessed can be filtered out.
Users can use Ethernet or a RS-232 cable to upload the program in a PLC/download a program to a PLC
and monitor a program through DVP-FEN01. The Modbus ASCII communication format that the RS-232
port on a DVP-EH3 series PLC supports is “19200, 8, N, 1”.
1.2 Functional Specifications
Communication interface
Ethernet interface
Connector RJ45 with an auto-MDI/MDIX
Number of ports 1 port
Cable 100 meter cat 5e cable is used.
Transmission speed The transmittion speed of 10/100 Mbps is automatically detected.
Communication protocol ARP, IP, TCP, UDP, DHCP, Modbus TCP, Delta configuration
RS-232 interface
Connector Mini DIN
Number of ports 1 port
Cable DVPACAB215/DVPACAB230/DVPACAB2A30
Transmission speed 19,200 bps
Communiucation format Data bit: 8 Parity bit: None Stop bit: 1
Communication protocol Modbus ASCII
Electrical specifications
Power voltage 5 V DC (supplied through the connector on a PLC)
Power consumption 1 W
Weight 16 g
1-2
Chapter 1 Introduction
Environmental specifications
Noise immunity ESD (IEC 61131-2, IEC 61000-4-2): 8 kV air discharge
EFT (IEC 61131-2, IEC 61000-4-4): communication I/O: ±2 kV
CS (IEC 61131-2, IEC 61000-4-6): 0.15~80 MHz, 3 Vrms
Operation/Storage Operation: 0°C~55°C (Temperature), 50~95% (Humidity), pollution degree 2
Storage: -25°C~70°C (Temperature), 5~95% (Humidity)
Vibration/Shock
resistance International standards IEC 61131-2, IEC 68-2-6 (TEST Fc)/IEC 61131-2 &
IEC 68-2-27 (TEST Ea)
1-3
Chapter 2 Dimensions and Profile
Contents
2.1 Dimensions...........................................................................................................2-2
2.2 Profile...................................................................................................................2-2
2.3 Indicators..............................................................................................................2-2
2.4 RJ45 Connector ...................................................................................................2-3
2.5 RS-232 Connector................................................................................................2-3
2.6 Troubleshooting....................................................................................................2-3
2-1
DVP-FEN01 Ethernet Communication Card Operation Manual
2.1 Dimensions
Unit: mm (Exclusive of the DIP)
2.2 Profile
Mounting hole
Connector
RS-232 port
RJ45 port
Activity LED indicator (Orange)
Link LED indicator (Green)
Draw bar for removing a
communication card
1
2
34
7
6
5
8
(Back) (Side) (Front)
Firmware update switch
(Please make sure that the switch is
turned OFF before DVP-FEN01 is
used.)
2.3 Indicators
Indicator State Indication
ON An Ethernet connection is successful.
Link LED indicator Green OFF An Ethernet connection fails.
Blinking Data is being sent/received through Ethernet.
Activity LED indicator Oragne OFF No data is sent/received.
2-2
Indice
Altri manuali Delta Hardware per computer
Delta
Delta 06A2 Manuale utente
Delta
Delta EtherCAT CMM-EC03 Manuale utente
Delta
Delta CMM-DN01 Manuale utente
Delta
Delta PMC-24V075W1AA Manuale utente
Delta
Delta CoolDoor Manuale utente
Delta
Delta SX-174 Manuale utente
Delta
Delta PCI-DMC-F01 Manuale utente
Delta
Delta M125HV-113 Manuale utente
Delta
Delta AH500 series Manuale utente
Delta
Delta CMM-EC02 Manuale utente
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
