Delta Amplon MX Series Manuale utente
www.deltapowersolutions.com
Delta UPS - Amplon Family
User Manual
The power behind competitiveness
MX Series, Single Phase
1.1/ 2/ 3 kVA
II
Amplon MX Series
Save This Manual
This manual contains important instructions and warnings that you should
follow during the installation, operation, storage and maintenance of this
product. Failure to heed these instructions and warnings will void the warranty.
Copyright © 2019 by Delta Electronics Inc. All Rights Reserved. All rights of this
User Manual (“Manual”), including but not limited to the contents, information,
and figures are solely owned and reserved by Delta Electronics Inc. (“Delta”).
The Manual can only be applied to the operation or the use of this product. Any
disposition, duplication, dissemination, reproduction, modification, translation,
extraction, or usage of this Manual in whole or in part is prohibited without the prior
written permission of Delta. Given that Delta will continuously improve and develop
the product, changes may be made to the information in this Manual at any time
without obligation to notify any person of such revision or changes. Delta will make
all possible efforts to secure the accuracy and the integrity of this Manual. Delta
disclaims any kinds or forms of warranty, guarantee, or undertaking, either expressly
or implicitly, including but not limited to the completeness, faultlessness, accuracy,
non-infringement, merchantability or tness for a particular purpose of the Manual.
Table of Contents
III
Table of Contents
Chapter 1 : Important Safety Warnings------------------------------- 1
1.1 Transportation ---------------------------------------------------- 1
1.2 Preparation-------------------------------------------------------- 1
1.3 Installation--------------------------------------------------------- 1
1.4 Operation ---------------------------------------------------------- 2
1.5 Maintenance, Service and Faults --------------------------- 2
1.6 Packing List ------------------------------------------------------- 4
Chapter 2 : Installation and Setup ------------------------------------- 6
2.1 Rear Panel View------------------------------------------------- 6
2.2 Operating principle ---------------------------------------------- 8
2.3 Install The UPS -------------------------------------------------- 8
2.4 Setup the UPS --------------------------------------------------10
2.5 Battery Replacement ------------------------------------------13
2.6 Battery Kit Assembly (option)--------------------------------15
Chapter 3 : Operation -----------------------------------------------------17
3.1 Button Operation -----------------------------------------------17
3.2 LCD Panel--------------------------------------------------------18
3.3 Audible Alarm----------------------------------------------------20
3.4 LCD Display Wordings Index--------------------------------20
3.5 UPS Setting------------------------------------------------------22
3.6 Operating Mode Description---------------------------------27
3.7 Faults Reference Code ---------------------------------------29
3.8 Warning Indicator-----------------------------------------------29
Chapter 4 : Troubleshooting --------------------------------------------31
Chapter 5 : Storage and Maintenance -------------------------------33
Chapter 6 : Technical Specications ---------------------------------34
Chapter 7 : Warranty-------------------------------------------------------36
1
Amplon MX Series
Chapter 1 : Important Safety Warnings
Please comply with all warnings and operating instructions in this manual strictly.
Save this manual properly and read carefully the following instructions before
installing the unit. Do not operate this unit before reading through all safety
information and operating instructions carefully
1.1 Transportation
z
zPlease transport the UPS system only in the original package to protect against
shock and impact.
1.2 Preparation
z
zCondensation may occur if the UPS system is moved directly from cold to warm
environment. The UPS system must be absolutely dry before being installed.
Please allow at least two hours for the UPS system to acclimate the environ-
ment.
z
zDo not install the UPS system near water or in moist environments.
z
zDo not install the UPS system where it would be exposed to direct sunlight or
near heater.
z
zDo not block ventilation holes in the UPS housing.
1.3 Installation
z
zDo not connect appliances or devices which would overload the UPS system (e.g.
laser printers) to the UPS output sockets.
z
zPlace cables in such a way that no one can step on or trip over them.
z
zDo not connect domestic appliances such as hair dryers to the UPS output sockets.
z
zThe UPS can be operated by any individuals with no previous experience.
z
zConnect the UPS system only to an earthed shockproof outlet which must be
easily accessible and close to the UPS system.
z
zPlease use only VDE-tested, CE-marked mains cable (e.g. the mains cable of
your computer) to connect the UPS system to the building wiring outlet (shock-
proof outlet).
Chapter 1 Important Safety Warnings
2
z
zPlease use only VDE-tested, CE-marked power cables to connect the loads to
the UPS system.
z
zWhen installing the equipment, it should ensure that the sum of the leakage cur-
rent of the UPS and the connected devices does not exceed 3.5mA.
z
zTemperature Rating - Units are considered acceptable for use in a maximum
ambient of 40°C (104°F).
z
zFor PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the
equipment and shall be easily accessible.
z
zCaution:The unit is heavy. Lifting the unit requires a minimum of two people.
1.4 Operation
z
zDo not disconnect the mains cable on the UPS system or the building wiring
outlet (shockproof socket outlet) during operations since this would cancel the
protective earthing of the UPS system and of all connected loads.
z
zThe UPS system features its own, internal current source (batteries). The UPS
output sockets or output terminals block may be electrically live even if the UPS
system is not connected to the building wiring outlet.
z
z In order to fully disconnect the UPS system, rst press the OFF/ ENTER button
to disconnect the mains.
z
z Prevent no uids or other foreign objects from inside of the UPS system.
z
zThe REPO and USB circuits are an IEC 60950-1 safety extra low voltage (SELV)
circuit. This circuit must be separated from any hazardous voltage circuits by re-
inforced insulation.
1.5 Maintenance, Service and Faults
z
zThe UPS system operates with hazardous voltages. Repairs may be carried out
only by qualied maintenance personnel.
z
zCaution - risk of electric shock. Even after the unit is disconnected from the
mains (building wiring outlet), components inside the UPS system are still con-
nected to the battery and electrically live and dangerous. Before carrying out
any kind of service and/ or maintenance, disconnect the batteries and verify that
no current is present and no hazardous voltage exists in the terminals of high
capability capacitor such as BUS-capacitors.
3
Amplon MX Series
z
zTo avoid electrical shock, turn off the unit and unplug it form the AC power
source before servicing the battery
z
zOnly persons are adequately familiar with batteries and with the required pre-
cautionary measures may replace batteries and supervise operations. Unauthor-
ized persons must be kept well away from the batteries.
z
zCaution - risk of electric shock. The battery circuit is not isolated from the input
voltage. Hazardous voltages may occur between the battery terminals and the
ground. Before touching, please verify that no voltage is present!
z
zBatteries may cause electric shock and have a high short-circuit current. Please
take the precautionary measures specied below and any other measures nec-
essary when working with batteries:
- remove wristwatches, rings and other metal objects
- use only tools with insulated grips and handles.
z
zWhen changing batteries, install the same number and same type of batteries.
z
zDo not attempt to dispose of batteries by burning them. This could cause battery
explosion.
z
z Do not open or destroy batteries. Escaping electrolyte can cause injury to the
skin and eyes. It may be toxic.
z
zA battery can may cause a risk of electrical shock and high short-circuit current.
The following precautions should be observed when working on batteries:
a)Remove watches, rings, or other metal objects. b)Use tools with insulated
handles.c)Wear rubber gloves and boots.
d)Do not lay tools or metal parts on top of batteries.
e)Disconnect charging source prior to connecting or disconnecting battery
terminals.
f)Determine if battery is inadvertently grounded. If inadvertently grounded,
remove source from ground. Contact with any part of a grounded battery can
result in electrical shock. The likelihood of such shock can be reduced if such
grounds are removed during installation and maintenance.
z
zWhen replacing batteries, use the same type and number of batteries or battery
packs.
z
zDo not dismantle the UPS system.
z
zThis is a category C1 UPS product.
Chapter 1 Important Safety Warnings
4
1.6 Packing List
For models UPA112M2MX0B035(1.1 kVA), UPA202M2MX0B035(2kVA),
UPA302M2MX0B035(3kVA)
12
3
4
57
6
Test report
No. Item Q’ty
1UPS 1 PC
2Input cable (Schuko) 1 PC
3USB cable 1 PC
4User manual 1 PC
5Tower stand with screws 4 PCS
6Ear kit with screws 2 PCS
7Test report 1 PC
5
Amplon MX Series
For models UPA112M2MX0B0BB(1.1 kVA), UPA202M2MX0B0BB(2kVA) ,
UPA302M2MX0B0BB(3kVA)
12
3
4
57
6
Test report
No. Item Q’ty
1UPS 1 PC
2Input cable (AU) 1 PC
3USB cable 1 PC
4User manual 1 PC
5Tower stand with screws 4 PCS
6Ear kit with screws 2 PCS
7Test report 1 PC
Chapter 2 Installation and Setup
6
2.1 Rear Panel View
z
zStandard Runtime Model
MX-1.1K
MX-2K
MX-3K
65
65
65
8
7
4
311 10
8
7
4
3
1
2
1
2
11
9
9
8
7
4
3
1
11 2
Chapter 2 : Installation and Setup
7
Amplon MX Series
No. Item
1Programmable outlets: connect to non-critical loads.
2Output receptacles: connect to mission-critical loads.
3AC input
4Network/Fax/Modem surge protection
5Emergency power off function connector (REPO)
6USB communication port
7RS-232 communication port
8Mini Slot
9Input circuit breaker
10 Fuse
11 Ground screw
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali Delta UPS
Delta
Delta Amplon RT5K Manuale utente
Delta
Delta 600VA Istruzioni operative
Delta
Delta 3KVA Manuale utente
Delta
Delta NH-20k Manuale utente
Delta
Delta VX Series Manuale utente
Delta
Delta MBB-S Istruzioni operative originali
Delta
Delta EH-10K Manuale utente
Delta
Delta UPS103N2004N0B0 Istruzioni operative originali
Delta
Delta Ultron Series Manuale utente
Delta
Delta DPH series Manuale utente
Delta
Delta DPS Series Manuale utente
Delta
Delta ups302R2002N035 Istruzioni operative originali
Delta
Delta DPH series Manuale utente
Delta
Delta Ultron GES203HH33A035 Manuale utente
Delta
Delta Amplon RT Series Manuale utente
Delta
Delta Ultron Series Manuale utente
Delta
Delta UPS602N2004N035 Manuale utente
Delta
Delta Ultron DPS-400K Manuale utente
Delta
Delta Amplon RT Series Manuale utente
Delta
Delta Amplon UPA102R2RX2N035 Manuale utente
Manuali UPS popolari di altre marche
Pylontech
Pylontech Victron & Pylontech US5000 Manuale utente
Tecnoware
Tecnoware EVO DSP PLUS MM 6.8 Manuale utente
Mecer
Mecer ME-1000-WTU Manuale utente
Mustek
Mustek PowerMust 530(B) Plus Manuale di installazione e funzionamento
Emerson
Emerson Liebert NXL series Manuale utente
MAKELSAN
MAKELSAN BOXER SERIES Manuale utente
