Den-Sin C-200AIR Guida

www.densin.com

USER GUIDE & SPARE PARTS MANUAL

C-200AIR

PNEUMATIC POWERED

HEAVY DUTY COLD WATER

HIGH PRESSURE CLEANER

Introduction

C-200Air V16 Page 1

Introductions

Congratulations on your purchase of the DEN-SIN High Pressure Cleaner.

Model: C-200AIR

Read this user manual before you start up your High Pressure Cleaner the first time.

This document or part of it may not be photocopied, or in any other way reproduced, or

translated to other languages without the prior written consent of DEN-SIN.

This machine is a High Pressure Cleaner producing water jet under high-pressure, which is

why severe injuries can occur if the safety precautions are not observed.

Therefore a full understanding of the contents of this instruction manual is required, in order

to prevent injuries to you, objects and persons near-by.

Safety

The following symbols are used in this manual to indicate procedures that if not followed,

may results in personal injuries or damage to equipment.

Version 16: March 2015

Revision History

Revision Rev.No.

Manual updating 14

Manual Updating / Repair Kit Updating 15

Updating of Manual with new configuration components 16

WARNING

is used to alert the reader of procedures or

practice which if not followed correctly could result in personal

injuries.

WARNING

CAUTION

is used to alert the reader of procedures or

practice which if not followed correctly could result in damage

to machine or other equipment.

NOTE

is used to highlight important information that may

assist the reader carrying out the procedure or understanding the

text.

NOTE

Table of Contents

C-200Air V16 Page 2

Table of contents

Introductions .............................................................................................................................1

Table of contents .......................................................................................................................2

1. Getting acquainted with your High Pressure Cleaner ......................................................3

Fast and efficient cleaning ......................................................................................................3

Specifications..........................................................................................................................3

Applications ............................................................................................................................3

Unpacking ...............................................................................................................................4

Machine Installation / Setup ...................................................................................................4

Machine Shut Down Procedure ..............................................................................................7

Operations...............................................................................................................................8

2. Safety and protection information ......................................................................................9

General safety & application guidelines.................................................................................9

Safety devices .........................................................................................................................9

Safety precautions.................................................................................................................10

WARNING ..............................................................................................................................10

3. Maintenance and troubleshooting .....................................................................................12

Service instructions...............................................................................................................14

4. Available accessories...........................................................................................................17

Accessories ...........................................................................................................................17

ID-plate .................................................................................................................................17

Chassis assembly .....................................................................................................................18

Chassis assembly spare-parts list ..........................................................................................19

Air-motor assembly ..............................................................................................................20

Pump assembly .....................................................................................................................21

Pump assembly spare-parts list.............................................................................................22

Un-loader valve assembly.....................................................................................................24

Unloader valve assembly spare-parts list..............................................................................25

Repair kit Unloader valve .....................................................................................................26

Lance assembly.....................................................................................................................27

Lance assembly spare-parts list ............................................................................................27

Complete HP hose assembly.................................................................................................28

Complete HP hose w/ Trigger gun........................................................................................28

Trigger gun assembly............................................................................................................29

Trigger gun assembly spare-parts list ...................................................................................29

5. Declaration and Warranty.................................................................................................31

EU declaration of conformity ...............................................................................................31

Warranty ...............................................................................................................................31

6. Spare Parts Request Form .................................................................................................32

7. Maintenance Log Book.......................................................................................................33

The information contained in this user guide is subject to change without

notice.

NOTE

1. Getting acquainted with your High Pressure Cleaner

C-200Air V16 Page 3

1. Getting acquainted with your High Pressure Cleaner

Fast and efficient cleaning

The DEN-SIN High Pressure Cleaner C-200AIR enables you to get more cleaning done in

less time, fully independent of power supply.

This DEN-SIN High Pressure Cleaner offers you high performance yet a compact design.

The compact design enables the machines to be agile within inconvenient places even at

staircases, and the high performance gives you the opportunity to solve an array of cleaning

tasks. This High Pressure Cleaner is designed for heavy industrial use as well as for cleaning

contractors. All pump parts, fittings and pipes in contact with water are made of non-

corrosive materials. Together with the ceramic pistons, long life seals and stainless steel

valves, it ensures long life and high durability.

Specifications

Model

Motor

Speed

Working

Pressure

Flow

Capacity

Air

Consumption

Dimensions

LxWxH

Weight

kW rpm

psi

Bar

gpm

l/min

mm kg

C-200AIR

96.6 1500 290

0 200 3.3 15

7 Bar/100 psi

330cfm/150m

/hr 850x550x900

Applications

These heavy-duty High Pressure Cleaners are capable of removing any kind of dirt:

Algae off concrete constructions

Paint and graffiti off walls

Dust, dirt, soil & mud off floors

Oil & grease off engines and other mechanical parts

Dirt and salt deposits off ship decks

And with the option for use of accessories even many more jobs are to be dealt with:

Sand-blasting

Drain-cleaning

Dispensing of soaps and chemicals

Sludge pumping

Extra long lances for hard to reach places

Floor cleaning equipment

Rotary brushes

This machine is only to be used for the purposes it is designed for. Any other

use shall be considered improper and therefore potentially dangerous. The

manufacturer is not to be held responsible for any damages caused by

improper use.

CAUTION

1. Getting acquainted with your High Pressure Cleaner

C-200Air V16 Page 4

Unpacking

Remove the High Pressure Cleaner and its accessories from the packing material. For

transport and packing reasons some accessories may be supplied disassembled.

Make sure all components are present:

•High-pressure machine itself

•Handle bar (partly attached)

•Wing nuts for the handle bar

•Electrical cord (attached)

•High pressure hose with Spray-gun trigger

•Double barrel lance (disassembled)

•Water inlet male hose coupling

Machine Installation / Setup

Attach the handle bar to the machine using the wing nuts and bolts supplied and align the

handle bar according to the cabinet moulding.

Mount the high-pressure hose on to the High Pressure Cleaner by pulling back

the retainer on the high-pressure hose coupling, while sliding it onto the male

outlet of the unloader till a click sound could be heard.

Assemble the double barrel spray-lance. To mount the

assembled spray-lance on to the Spray-gun trigger, pull

forward the front of the Spray-gun trigger (A) while

sliding in the male swivel coupling part of the spray-lance.

(B)

(A)

(B)

1. Getting acquainted with your High Pressure Cleaner

C-200Air V16 Page 5

Prepare the water supply for the High Pressure Cleaner by attaching a hose

to the supplied low pressure inlet male-coupling. Connect the other end of

the water supply hose to a potable water tap. Turn on tap.

Connect to the public mains water supply in accordance to

regulations.

Before starting the machine, bleed out air by pulling the trigger-gun handle until any air has

escaped the inlet hose. Release trigger once water flow is smooth at the outlet.

Connect the air supply hose into the coupling provided and attached the

coupling to the machine once supply line is secured. Secure the coupling

onto the machine by depressing the 2 locking lever downwards. Power up

machine by turning on the air supply

Adjust the air pressure of the FRL unit by turning the

pressure regulator knob as shown until water pressure

is achieved.

The high pressure cleaner is now ready for

operation. The spray-gun lance is affected by a

recoil force during operation – therefore keep a

firm grip with both hands on the Spray-gun

handle and the lance. Press the trigger and tighten

pressure regulating knob to achieve maximum

pressure for effective cleaning.

Notice

Depress Trigger

Knob fully tighten

Pressure Regulator

1. Getting acquainted with your High Pressure Cleaner

C-200Air V16 Page 6

The pressure can be regulated by turning the knob on the spray-gun

lance. Tighten knob for maximum pressure and loosen for low pressure

washing. When using chemical injector, pressure must be adjusted to

low.

Make sure your local power supply specifications are in accordance with the

motors requirement. Refer to the ID-plate on the machine. Do NOT run the

High Pressure Cleaner without sufficient potable water supply as it can cause

cavitation and serious damage to internal pump parts. Do not let the machine

recycle the water (running with Spray-gun trigger not activated) for more than

a minute. This can cause serious damage to the seals.

Pressure Regulating Knob

CAUTION

1. Getting acquainted with your High Pressure Cleaner

C-200Air V16 Page 7

Machine Shut Down Procedure

Release trigger and lower down the pressure by loosening the knob on

the lance.

Turn off the High Pressure Cleaner by turning off the main air supply.

Once machine stop, depress trigger to release trap pressure in the pump and hose line. Make

sure lance is pointing downwards when doing this as pressure could cause injury.

Once pressure is release, turn off water supply and disconnect inlet and

outlet hose from machine. Disconnect air supply inlet. Dry the machine

and store it.

1. Getting acquainted with your High Pressure Cleaner

C-200Air V16 Page 8

Operations

To prevent accidents from happening, ensure the safety of the person(s) who

uses the equipment and to protect bystanders and nearby placed inventory or

machinery, a few safety precautions needs attention.

1) Treat the machine as a high-speed cutting tool.

2) Anyone under the age of 18 is NOT allowed to use the machine.

3) Always keep the High Pressure Cleaner and its accessories in good working condition.

Check the machine for defects. Do NOT start up the machine if there is any defect.

Have the machine serviced.

4) When using the High Pressure Cleaner and its accessories, eye protection must be worn

to protect against repelling or ricocheting matters causing eye damage.

5) Suitable clothing and footwear must be worn while using the equipment to protect the

operator. Do not try to clean clothes or footwear with the machine.

6) Precautions must be made to keep bystanders away from the working range.

7) Do NOT spray-clean on yourself, others or live animals.

The high-pressure beams are capable of making severe

injuries.

8) Do NOT spray at electrical equipment OR the machine itself.

9) While repairing or servicing the equipment and its accessories always make sure the

machine is turned off and disconnected from the main power supply.

10) Only allow instructed personnel to operate the machine.

11) Activating the trigger/gun can cause backward force therefore always hold spray lance

with both hands.

12) When pausing during operation turned off the main switch of the machine and ensures

that the trigger/gun is locked.

13) Only use high-pressure hoses, connections and nozzles specified by DEN-SIN.

14) IMPORTANT – Do not use the machine in a possible explosive environment in

accordance with EN-50014.

WARNING

2. Safety and Protection information

C-200Air V16 Page 9

2. Safety and protection information

General safety & application guidelines

1) It is not allowed to clean asbestos containing surfaces with high-pressure, unless using

special equipment.

2) Persons under the influence of alcohol, drugs or medicine should not operate the

machine.

3) This machine has been constructed for use with Nilfisk-ALTO detergents. The use of

other detergents or chemicals may cause problems as to the operation and the safety.

4) When using detergents the instructions should always be strictly observed.

5) Always flush the machine with clean water after use of chemical/detergents.

6) Do not use the machine if important parts are damaged – i.e. safety devices, high-pressure

hoses, spray handle.

7) The user is obliged to observe all national working environment and working safety

regulations concerning “operation of high-pressure washers”.

8) It is not allowed to connect this machine directly to a potable water supply.

9) If the machine is to be connected to potable water supply it is strictly necessary to fit the

machine with a water break tank, in accordance with EN1717.

Safety devices

The machine is equipped with the following safety devices:

1) Stop button. Please refer to the separately supplied manual covering the proper use of the

engine.

2) Un-loader and safety valve protect against overpressure.

3) Locking device on spray-gun handle. The locking device prevents the trigger from being

activated when pulled out.

*Spray gun may change without notice

Do Don’t

Locking

Indice

Altri manuali Den-Sin Idropulitrice

Den-Sin

Den-Sin MERMAID E1100-I Guida

Den-Sin

Den-Sin C-150D Guida

Den-Sin

Den-Sin C-250E Manuale utente

Den-Sin

Den-Sin H-110-200E Manuale utente

Den-Sin

Den-Sin HB-200 Guida

Den-Sin

Den-Sin C-110E Guida

Den-Sin

Den-Sin Merlion Plus E500 Guida

Den-Sin

Den-Sin MERMAID E500-S Guida

Manuali Idropulitrice popolari di altre marche

Shark

Shark RG-232637 Manuale utente

Shakti Technology

Shakti Technology S3 Manuale utente

Kärcher

Kärcher K 4 Pure Manuale utente

Porter-Cable

Porter-Cable D25806-025-2 Manuale utente

REM POWER

REM POWER HDEm 662 Manuale utente

Landa

Landa HS-3000 Manuale utente

Craftsman

Craftsman 580.752270 Manuale utente

HIKOKI

HIKOKI AW 100 Manuale utente

Delco

Delco DC 1302 Manuale utente

Kärcher

Kärcher K 3 Full Control Manuale utente

BIEMMEDUE

BIEMMEDUE 120/10 - 170/13 Manuale utente

ARKSEN

ARKSEN 014-HG-14141-HR Manuale utente

Black & Decker

Black & Decker PW1700SPX Manuale utente

Kärcher

Kärcher 595 - SPARE Guida

Kranzle

Kranzle B 10 200 Manuale utente

Stihl

Stihl RE 90 Manuale utente

Husky

Husky HU80911 Manuale utente

PowR-Quip

PowR-Quip PQ-2600 Manuale utente