Denso 400BW-CE Manuale utente

Bar Code Handy Terminal

BHT

400B-CE/400B

-CE

User’sManual

If you leave the BHT with the battery cartridge discharged or with no battery cartridge

loaded or if you replace the battery cartridge in a wrong way, the BHT may lose the data

stored in it.

Before cold booting (refer to Chapter 2, Section 2.3.5 "Warm and Cold Booting"), it is

recommended that important data be saved into the FLASH folder or uploaded to the

host computer. Cold booting will erase all data stored in the RAM.

DENSO WAVE INCORPORATED does not assume any product liability arising out of, or in

connection with, the application or use of any product, circuit, or application described herein.

If it is judged by DENSO WAVE INCORPORATED that malfunction of the product is due to the

product having been dropped or subjected to impact, repairs will be made at a reasonable charge

even within the warranty period.

Intellectual Property Precaution

DENSO WAVE INCORPORATED ("DENSO WAVE") takes reasonable precautions to ensure its

products do not infringe upon any patent of other intellectual property rights of other(s), but DENSO

WAVE cannot be responsible for any patent or other intellectual property right infringement(s) or

violation(s) which arise from (i) the use of DENSO WAVE's product(s) in connection or in

combination with other component(s), product(s), data processing system(s) or equipment or

software not supplied from DENSO WAVE; (ii) the use of DENSO WAVE's products in a manner for

which the same were not intended nor designed; or (iii) any modification of DENSO WAVE's

products by other(s) than DENSO WAVE.

Limited Warranty on Software Products

In no event will DENSO WAVE INCORPORATED be liable for direct, indirect, special, incidental, or

consequential damages (including imaginary profits or damages resulting from interruption of

operation or loss of business information) resulting from any defect in the software or its

documentation or resulting from inability to apply the software or its documentation.

permission in writing from the publisher.

Specifications are subject to change without prior notice.

Microsoft, Windows and ActiveSync are either registered trademarks or trademarks of Microsoft

Corporation.

Other products and company names mentioned in this manual are trademarks or registered trademarks

of their respective holders.

The latest precision manufacturing technology yields LCD panels whose pixels are 99.99% defect free.

The downside, note, is that up to 0.01% of the pixels can remain permanently dark or lit on today's

state-of-the-art panels.

Thin Newton's rings (rainbow-like patterns) may appear on the touch panel.

This does not necessarily indicate a problem with the touch panel.

US and Canada Regulations

BHT-400BW-CE contains Wireless LAN module (type WM-G-MR-01) that complies with Part 15 of FCC

rules and RSS-Gen of IC rules.

For Wireless LAN module

This device complies with Part 15 of FCC rules and RSS-Gen of IC rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired

operation.

FCC WARNING: Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

CAUTION: Radio Frequency Radiation Exposure

The available scientific evidence does not show that any health problems are associated with using

low power wireless devices. There is no proof, however, that these low power wireless devices are

absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the

microwave range while being used. Whereas high levels of RF can produce health effects (by

heating tissue), exposure to low-level RF that does not produce heating effects causes no known

adverse health effects. Many studies of low-level RF exposures have not found any biological effects.

Some studies have suggested that some biological effects might occur, but such findings have not

been confirmed by additional research. This Barcode Handy Terminal that is installed WM-G-MR-01

(FCC ID: PZWWMGMR01) has been tested and found to comply with FCC radiation exposure limits

set forth for an uncontrolled equipment and meets the FCC radio frequency (RF) Exposure

Guidelines in Supplement C to OET65. Please refer to the SAR test report that was uploaded at FCC

website.

Do not place hands or body near the antenna section to avoid RF exposure.

This transmitter must not be co-located or operated in conjunction with any other antenna or

transmitter.

BHT-400B-CE and BHT-400BW-CE comply with Part 15 of FCC rules and ICES-003 of IC rules.

For Barcode Handy Terminal

This device complies with Part 15 of FCC rules and ICES-003 of IC rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired

operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

NOTE: This Class A digital device apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

Declaration of Conformity (For European Union)

The radio frequency module that complies with the Directive 99/5/EC(R&TTE) is mounted on this device

(BHT-400BW-CE).

DECLARATION OF CONFORMITY

Directive 99/5/EC (R&TTE)

Manufacturer or

Authorized representative : DENSO WAVE INCORPORATED

Address : 1-1 Showa-cho, Kariya-shi, Aichi-ken, 448-8661, Japan

We declare on our sole responsibility, that the following product :

- Kind of equipment : Radio frequency module

- Type-designation : WM-G-MR-01

is compliance with the essential requirement of §3 of the R&TTE.

- Health and safety requirements pursuant to §3(1)a :

Applied Standard(s) or other means of providing conformity :

EN60950-1

- Protection requirements concerning EMC §3(1)b :

Applied Standard(s) or other means of providing conformity :

EN301 489-1

EN301 489-17

- Measures for the effective use of the Radio frequency spectrum §3(2) :

Applied Standard(s) or other means of providing conformity :

EN300 328

CE marking

Labeling

■BHT-400B-CE

■BHT-400BW-CE

For USA and Canada For European Union

Preface

Please READ through these operating instructions carefully. It will enable you to operate your

BHT-400B-CE/400BW-CE correctly.

The following contents are explained in this guide:

•Handling and operating methods for the BHT-400B-CE/400BW-CE

•Communication

•Error messages

•Specifications

•Handling and operating methods for the optical communication unit CU-400 series

The BHT-400B-CE/400BW-CE models are designed in the same way except for the interface

differences shown in the table below. In this manual, operations common for all models are

explained unless otherwise stated.

USB

Interface Connector

Interface Wireless

Communication

BHT-400B-CE ●●–

BHT-400BW-CE ●●●

After you have finished reading the instructions, keep this manual handy for speedy reference.

How this book is organized

This manual is made up of five chapters and appendices.

Chapter 1 Quick Guide

Describes the basic operating method of the BHT and the related notes.

Chapter 2 Getting Started the BHT and System Menu

Summarizes the BHT system configuration and describes the operation including preparation and

System Mode (which is required for the efficient use of application programs).

Chapter 3 Communications Operations of the BHT

Describes the communications operations of the BHT-400B-CE/400BW-CE — the wireless

communication (BHT-400BW-CE only), infrared communication, USB interface specifications,

connector interface specifications, basic communications specifications, communication using Ymodem,

and ActiveSync--for data transfer with the host computer or other devices.

Chapter 4 Error Messages

Lists the error messages which will appear on the LCD if some error occurs in the BHT.

Chapter 5 Handling the CU-400 (Option)

Describes the handling procedure of the communication unit CU-400, the interfacing with the host

computer, and the charging of the rechargeable battery cartridge.

Appendix A: Specifications

Appendix B: Loading an Optional Compact Flash Card

Appendix C: Quality Assurance Standards

Related Publications

BHT-400-CE API Reference Manual

BHT-400-CE Class Library Reference Manual

2D Code Scanner/Barcode Scanner Keyboard Interface with BHT-CE kbifCE User’s Guide

Screen Indication

The lettering in the screens in this manual is a little different from that in the actual screens. File names

used are only for description purpose, so they will not appear if you have not set files having those

names.

iii

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Denso Lettore di codici a barre

Denso

Denso BHT-100B Manuale utente

Denso

Denso BHT-700-CE Manuale utente

Denso

Denso BHT-302B Manuale utente

Denso

Denso BHT-8000 Manuale di installazione

Denso

Denso Power Net Terminal BHT-103 Manuale utente

Denso

Denso BHT-1700 Series Manuale utente

Denso

Denso BHT-805B Manuale utente

Denso

Denso GT10B-SM Manuale utente

Denso

Denso BHT-1400QWB-CE Manuale utente

Denso

Denso BHT-805BWB Manuale utente

Denso

Denso BHT-7500S Manuale utente

Denso

Denso BHT-604B Manuale utente

Denso

Denso BHT-825QW Manuale utente

Denso

Denso BHT-604BW Manuale utente

Denso

Denso BTH-300BW Manuale utente

Denso

Denso BHT-1600 Manuale utente

Denso

Denso AT30Q-SM Manuale utente

Denso

Denso BHT-700-WM Manuale utente

Denso

Denso GT10B-SM Manuale utente

Denso

Denso BHT-904B Manuale utente

Denso

Denso BHT-700BB-CE Manuale

Denso

Denso BHT-1700BWB Istruzioni per l’uso

Denso

Denso BHT-805BW Manuale

Denso

Denso GT10B-SB Manuale utente

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente

Atid

Atid AT188N Plus Manuale utente