Denver Electronics SCO-65100 Istruzioni operative
1
Original Instruction
SCO-65100
facebook.com/denverelectronics
Before operating this vehicle, read all the instructions for safe assembly and operations. User’s manual can guide
you through the functions and usage of E-scooter. Before using this E-scooter, familiarize yourself with how to
operate, so that you can keep the E-Scooter in the best condition possible.
This appliance can be used by children aged from 14 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
Version 1.0
11
2
Table of Contents
Table of Contents…………………………………..…………………………………………..2
Product and Accessories…………………………………………………………………….3
Folding steps…………………………………………………………………………………..4-5
Handlebar assembly…………………………………………………………………………..5
Charger connection……………………………………………………………………………6
Intended Use………………………………………………………………………………..……7
Safety Instruction………………………………………………………………………..….7-8
Maintenance…………………………………………………………………………………9-10
Instrument menu…………………………………………………………………………11-12
Operation Guide……………………………………………………………………………....12
List of parameters……………………………………………………………………………..13
E-scooter safe parking……………………………………………………………………….14
Safe transportation……………………………………………………………………………14
Warnings……………………………………………………………………………………...14-16
3
1.
Product and Accessories
Clasp
Mechanical brake
Electric brake
Accelerator
Left
Right
4
2. Folding steps
1. Unfolding:
1) Stand the E-scooter on its wheels, press the unlock clasp.
2) Raise the handle slowly.
3) The E-scooter is unfolded as soon as you hear the rod click into place.
2. Folding
1) Hold the clasp and pull it outward
2) Press the front tube of E-scooter downward (Attention: The limit position must be put right.)
3) The rod clicks audibly into place.
5
4) Dual action safety knob
Press the red button to fold or unfold the e-scooter.
Rotate the safety knob to position “Folding”on left or right, you can press the red button to fold your
e-scooter. Rotate the safety knob to “RIDING”position, you can start your driving.
The knob must be set to RIDING when riding for safety issue to prevent unintended folding the e-
scooter.
3.
Handlebar assembly
1)
Parts inside the packaging: two handlebars
Fold-Unfold Position
3) Before operating the E-scooter, turn the handlebar grips and carefully check all the
components to make sure that the steering is correctly installed as described above, and that all
connecting parts are secure and fully functional.
2) Change display angle: Loosen screw on the handlebar, rotate the axle to make the
handlebar meter screen upwards while the and display screen turn inwards in a horizontal level.
Remember to tighten screws again
Figure (1)
Figure (2)
6
4.
Charger connection
Plug the adapter into the charging port
7
5.
Intended Use
The e-scooter is neither a means of transport nor sports equipment, rather a device that the operator can ride
relaxed. The E-scooter for domestic use only and only by a person aged at least 14 with a maximum weight of
100 kg. The other parameters for the permissible operation of the E-scooter are defined on page 12 under
paragraph 10. Incidentally, the E-scooter may only be operated in good visibility conditions and only if the
physical conditions for stability on the E-scooter are met (for example, not on one leg/not under the influence
of drugs or alcohol). When operating the E-scooter, the operator must wear personal protective equipment
specified on page 13 under paragraph 1.2. (Preparation).
6.
Safety Instruction
We recommend always wearing helmet and protective gear like elbow, knee and wrist protectors to
ensure your personal safety.
Also make sure you have read the user manual carefully, to ensure you know how to ride it in a safe
and fun way.
For domestic use only.
It is your responsibility to be aware of and comply with all regulations. If there are no regulations for
this E-scooter in your country, please take care of your own safety and the safety of others.
Also pay attention to other people. Always ride safely and only at a speed that allows you to brake
safely at any time. A common thing for such products is that there is a risk that you may fall off the
product and injure yourself. Always ride as safely as possible.
If lending the E-scooter to friends and family, please make sure they use proper protective gear and
know how to ride it.
Before riding the E-scooter, please check that all parts are working as supposed to. If any loose
parts, abnormal noise, reduced battery life etc. are detected, please contact the place of purchase for
product service and warranty. Do not repair the E-scooter yourself.
Inspect the rear tire, rear brake, and brake pad according to Section 7 of the maintenance specification
in this operating instructions. The E-scooter may become unstable if the rear brake is deformed or
loose. This is because the distance between the brake pad and the rear wheel becomes too small,
possibly leading to a blocked rear wheel.
Avoid applying too much force or stepping on the rear fender permanently. This may cause the fender
to loosen or damage the spring holding the fender.
8
As a result, the brake pad constantly touches the wheel and the motor temperature increases due to
the additional resistance. The rear tire can also get loose if the brake is in constant braking position.
Avoid constant braking. As a result, the tires will not only wear off, but also become hot. This will
soften the rubber and it will no longer have the same grip on the road as usual. Do not touch the tire
after braking.
If you hear unusual noises or notice friction when switching on the E-scooter, a bearing may be
damaged. A worn bearing may even be indicated by strong vibration of the handlebar. In this case,
please contact your dealer since the bearing needs to be replaced and/or the handlebar checked and
adjusted.
Ride the E-scooter only on a dry surface since otherwise the riding safety and braking performance may
be impaired and the motor or bearings may be damaged.
Please do not ride up or down long and steep slopes.
Stop riding when you receive the "Low Battery Warning". The E-scooter then moves only slowly and
does not have the same traction as normal and the electric brake does not work. In this case, please
use the rear brake to stop the E-scooter. Get off the scooter as soon as the speed allows to do that
safely.
Do not use the electric brake and the throttle at the same time.
A normally working E-scooter operates safely and quietly. If you hear noises or notice bumpy operation,
please check wheels, bearings, and brakes. Contact your customer service for repair and maintenance,
if necessary.
9
7.
Maintenance
Storage and cleaning
If your E-scooter gets dirty, please clean it with a damp cloth. (you can use a stiff brush first to get
the worst dirt off and then use a cloth afterwards to clean it.). It is also possible to use a
little toothpaste if the dirt is stuck. Remember to clean with damp cloth after this.
Please make sure to keep the E-scooter turned off while cleaning it, and make sure to cover the
charging input to avoid problems with the electronics.
Please notice: Do not use alcohol, gas, kerosene or other corrosive and volatile chemical
solvents. This can damage both the appearance and the internal structure of the E-scooter. You
may not use pressured water‐gun or running watereither.
Please store your E-scooter in a dry and cool environment when not in use. Avoid leaving it
outdoors, as it is not made for use in wet areas. Nor is it good to expose to high
temperatures
caused by direct sun for a long time.
Maintenance of batteries
Please make sure the batteries do not get over 50°Celsius, or minus 10°Celsius for a longer period
of time. (e.g don’t leave the E-scooter in a hot car in summer, do not put batteries into fire
et.) Low temperature (e.g. subzero temperature) can damage the battery cells.
Keep the E-scooter away from open flame or other sources of heat to prevent the battery from
getting too hot. Also make sure not to leave the E-scooter at freezing temperatures. Both heat and
excessive cold can cause the battery to discharge.
Please avoid draining the batteries 100%. It is best to charge them while there is still power on them.
This will extend battery life. Also if riding the E-Scooter in cold or very hot areas, the battery time
can be lower than when riding in temperatures from 15‐25° Celsius. This is not a failure on
the
batteries, but are normal behavior.
Do not overcharge and discharge the battery.
Make sure that the battery is charged at regular intervals, even if you do not use the E-scooter
for a long time. This is to prevent damage to the battery caused by low voltage over an extended
period.
Please notice: Even fully charged batteries will run out of power if the E-Scooter is not used for
a period of time. Expect between 90 and 120 days in off mode if batteries are fully charged. If
only partially charged, this period of time is lower.
Please make sure to charge the batteries before they are 100% out of power, to avoid damagingthe
battery cells. (damaged battery caused by wrong handling are not covered bywarranty)
10
It is forbidden to disassemble battery package. This is only to be handled by official service repair
centers and professionals.
Maintaining bearings
The E-scooter has sealed and dustproof bearings so that no lubrication is required. Check the
bearings for wear at regular intervals to avoid unsafe riding. Do not jump on and off and do not
apply excessive force otherwise to avoid damage to the bearings. This is not a sports E-scooter.
Maintaining wheels
Check the wheels for wear at regular intervals to avoid unsafe riding.
Maintaining the brake
The brake pad is made of plastic. Check the brake pad for wear at regular intervals to avoid unsafe
riding. Do not apply excessive force to avoid damage to the brake. When the brake pad wear
1.3mm, need to be replaced.
Maintaining screws and other fasteners
Make sure that all screws are properly tightened to avoid unsafe situations. Be sure to grease the
moving parts at regular intervals to ensure the best possible riding experience.
•Please make sure to check that the steering system is correctly adjusted and that
all connection components are firmly secured and not broken before riding, refer to
handlebar assembly and safety instruction.
•Please read operation guide and warnings of correct techniques for use and
braking
•Aalways wear shoes;
•When self-locking nuts and other self- locking fixings may lose their effctiveness
•All parts and materials' quality of escooter can not be changed, modifications are not
allowed
Indice
Altri manuali Denver Electronics Scooter
Denver Electronics
Denver Electronics DBO-10050 MK2 Manuale utente
Denver Electronics
Denver Electronics DBO-8050 MK2 Manuale utente
Denver Electronics
Denver Electronics DBO-6550 MK2 Istruzioni operative
Denver Electronics
Denver Electronics DBO-6500 MK2 Istruzioni operative
Denver Electronics
Denver Electronics DBO-6510 BLACK Istruzioni operative
Denver Electronics
Denver Electronics SCO-65110 Manuale utente
Denver Electronics
Denver Electronics SEL-65220 Manuale utente
Denver Electronics
Denver Electronics SEL-65220 MK2 Manuale utente
Denver Electronics
Denver Electronics DBO-10000 Istruzioni operative
Denver Electronics
Denver Electronics DBO-6502 Istruzioni operative
