A CAUTION
Stacking
I I proper stacking of achines ay cause falling or dropping accidents.
When stacking other achines on this achine, be sure to observe the
following points.
* Check that the bonnet of the achine is free fro da age
and that the fixing bolts are not loosened and issing.
* Put the achine horizontally on a solid foundation which withstands the weight of
stacked achines.
* Machines can be stacked up to 2 stages.
The weight and size of stacked achines should
be less than those of this achine.
* Using square ti bers as shown right, put each
achine aking sure that the weight is even.
□ c
□ c
'7/7777/7/77777/7/ ///7/777///
Do not operate the achines in the state of
stacking to prevent falling or dropping accidents.
A CAUTION
HOT PARTS can burn skin.
1 High te perature units are located in the achine.
(Note that these units are very dangerous if they are
used incorrectly.)
* Be sure to close the door and lock it during operation.
* If the door needs to be opened during operation,
do not get your hands and head in the achine to
prevent unexpected bu s.
* When aking check or aintenance of the achine,
be sure to stop the achine.
* The bonnet is still hot even after the achine is
stopped.
Be careful until the engine is co pletely cooled.
~ 7 -
