Detcon C1D2 Manuale utente

C1D2 Dual Alarm Bar

2 Strobe with Horn Alarm Station

Operator’s Installation and Instruction Manual

DETCON, Inc.

4055 Technology Forest, Suite 100

The Woodlands, Texas 77387

Ph.281.367.4100 / Fax 281.298.2868

www.detcon.com

Aug. 04, 2015 • Document #4530 • Revision 0.1

Dual Alarm Bar

Dual Alarm Instruction Manual ii

This page left intentionally blank

Dual Alarm Bar

Dual Alarm Instruction Manual iii

Table of Contents

1.0 Description................................................................................................................................................ 1

1.1 Strobe ................................................................................................................................................... 2

1.2 Horn...................................................................................................................................................... 2

2.0 Installation................................................................................................................................................ 3

3.0 Operation.................................................................................................................................................. 5

4.0 Specifications............................................................................................................................................ 6

5.0 Spare Parts List........................................................................................................................................ 6

6.0 Warranty.................................................................................................................................................. 7

7.0 Revision Log............................................................................................................................................. 8

Table of Figures

Figure 1 Unit ........................................................................................................................................................ 1

Figure 2 Strobe..................................................................................................................................................... 2

Figure 3 Horn ....................................................................................................................................................... 2

Figure 2 Alarm Station Dimensions..................................................................................................................... 3

Figure 3 Wiring Diagram..................................................................................................................................... 4

Dual Alarm Bar

Dual Alarm Instruction Manual iv

Shipping Address: 4055 Technology Forest, Suite 100, The Woodlands, Texas 77381

Mailing Address: P.O. Box 8067, The Woodlands Texas 77387-8067

Phone: 888.367.4286, 281.367.4100 • Fax: 281.292.2860 • www.detcon.com •[email protected]

This page left intentionally blank

Dual Alarm Bar

Dual Alarm Instruction Manual Rev. 1.0 Page 1 of 8

1.0 Description

The Detcon Dual Alarm Bar audiovisual alarm stations are designed for installation and use in industrial

environments. The alarm station consists of a strobe and siren. The strobe can consist of any dome color such

as amber, blue, clear, green, Purple and Red. The siren is capable of producing coded blasts or sustained

tones. The Dual Alarm Bar alarm assemblies are specifically designed for locations or environments where a

very bright visual and high decibel alarm signal is required. The high-intensity strobe light provides 60-80

flashes per minute. The siren produces a noise level of 105db(A) @ 10 feet. The Horn and Strobes are UL

listed and CSA Certified and meet NEMA 4X watertight, dust-tight requirements. Alarm components are pre-

assembled on a NEMA 4 enclosure that is designed for C1D2 Groups B, C, and D locations.

Figure 1 Unit

The alarm station is pre-wired to control circuit alarm devices for the purpose of warning personnel of

hazardous conditions. When used in conjunction with Detcon Sentinel or other Detcon Controllers, the alarm

station is typically used to provide an alarm 1 (strobe1), alarm2 (strobe2), and alarm 3 (horn) for

predetermined hazardous environmental gas levels (toxic or flammable) as indicated by remote mount gas

sensors.

Dual Alarm Bar

Dual Alarm Instruction Manual Rev. 1.0 Page 2 of 8

1.1 Strobe

The alarm station strobe is configured with choice of dome colors such as amber, blue, clear, green, magenta,

or red. The strobes are rated NEMA4x for C1D2 Groups A, B, C, and D locations, and utilize a Strobe Guard,

and gasket to complete the NEMA4 rating. The strobes produce 1.9 joules per flash while drawing relatively

low current and have a flash rate of 60~80 per second.

Figure 2 Strobe

1.2 Horn

This range of light weight all GRP, flameproof sounders is intended for use in potentially explosive gas and

dust atmospheres and has been designed with high ingress protection to cope with the harsh environmental

conditions found offshore and onshore in the oil, gas and petrochemical industries. The Horn is rated for Class

I, Zone 1. The Horn has the ability to produce up to 125db(A) output dependent upon the tone settings (refer

to the Sound Signals Table).

Figure 3 Horn

Dual Alarm Bar

Dual Alarm Instruction Manual Rev. 1.0 Page 3 of 8

2.0 Installation

NOTE:

DO NOT

handle the unit by the cable.

The cable is not meant to be used as a

handle, and damage may occur to the unit if the cable is used to carry the unit.

The unit comes with U-Bolt hardware provided for mounting on 2~3 inch poles. Mount on pole at appropriate

height, and ensure hardware is tightened down so that the unit is not capable of moving.

There are two possible cables that may be connected to the unit. Connect the cable provided to the Control

Unit and to the Alarm Bar. This cable can only be connected one way. No other customer wiring is necessary.

Figure 4 Alarm Station Dimensions

Dual Alarm Bar

Dual Alarm Instruction Manual Rev. 1.0 Page 4 of 8

Strobe 3

Alarm 3

Strobe 4

Alarm 4

Strobe 1

Alarm 1 Strobe 2

Alarm 2

Red

Black

Blue

Red

Black

Orange

Green

White

Black

Red

Blue

Red

White

Orange

Green

Black

Red

Green/Yellow

Blue

White

Gray

Brown

Black

Blue

Brown

White

Gray

Use Ty-Wraps to keep wiring neat.

Cable to Horn.

DB3 Horn

Alarm 5

Figure 5 Wiring Diagram

Dual Alarm Bar

Dual Alarm Instruction Manual Rev. 1.0 Page 5 of 8

3.0 Operation

The Quad Alarm Bar provides four strobes and an alarm horn. The wireless alarm station is set to respond to

alarms from the controlling unit. The controller has independent control over the strobes and the Horns, and

they will be activated when the appropriate alarm is activated.

The horn has up to 32 possible settings, for use in different configurations. The default settings of the horn are

factory set. The default setting for the horn is 3 (11101). To change the setting of the horn, remove the rear

cover of the horn, and set the dip switches (TONE 1) according to the Sound Signals Table. TONE 1 has a 5

position dip switch used to set the horn sound signal.

Table 1 Sound Signals

Switch Setting Tone Tone Description

1 11111 Alt Tones 800/970 Hz at 1/4 sec

2 11110 Sweeping 800/970 Hz at 7Hz Fast Sweep(LF)

3 11101 Sweeping 800/1000 Hz at 1 Hz Med Sweep(LF)

4 11100 Continuous at 2850 Hz

5 11011 Sweeping 2400-2850 Hz at 7 Hz Fast Sweep

6 11010 Sweeping 2400-2850 Hz at 1 Hz

7 11001 Slow Whoop Slow Whoop

8 11000 Sweep 1200-500 Hz at 1 Hz Din Tone

9 10111 Int. Tone of 970 Hz at 1 Hz

10 10110 Swept 500 Hz 770 Hz in 0.5 second. Back-Up Alarm(LF)

11 10101 Alt. Tones 800/970 Hz at 7/8 Hz

12 10100 Int. Tone at 2850 Hz at 1Hz Back Up Alarm(HF)

13 10011 970Hz at 1/4 sec on 1 sec off

14 10010 Continuous at 970 Hz

15 10001 554Hz for 100ms / 440 Hz for 400ms French Fire Sound

16 10000 Int. 660 Hz 150 ms on 150 ms off Swedish Fire Alarm

17 01111 Int. 660 Hz 1.8 sec on 1.8 sec off Swedish Fire Alarm

18 01110 Int. 660 Hz 6.5 sec on 13 sec off Swedish Fire Alarm

19 01101 Continuous 660 Hz Swedish Fire Alarm

20 01100 Alt 554/440 Hz at 1 Hz Swedish Fire Alarm

21 01011 Int. 660 Hz at 7/8 Hz Swedish Fire Alarm

22 01010 Int. 2850 Hz 150 ms on 100 ms off Pelican Crossing

23 01001 Sweep 800-970 Hz at 50 Hz Low Freq Buzz

24 01000 Sweep 2400-2850 Hz at 50 Hz High Freq Buzz

25 00111 3 970Hz pulses 0.5on/0.5off, 1.5 off

26 00110 3 2850Hz pulses 0.5on/0.5off, 1.5 off

27 00101 Int. 3100 Hz 0.32s on / 0.68s off

28 00100 Spare/Customer Tone

29 00011 Spare/Customer Tone

30 00010 Spare/Customer Tone

31 00001 Spare/Customer Tone

32 00000 Spare/Customer Tone

Dual Alarm Bar

Dual Alarm Instruction Manual Rev. 1.0 Page 6 of 8

4.0 Specifications

Dual Alarm Bar

Voltage: 12VDC

Current : 1.5A Max

Mount: Wall Mount or 2~3” Pipe Mount

Environment Rating: Designed to meet NEMA 4 specifications

Area Classification: Designed for use in C1D2 Groups B, C, D locations

Ambient Temperature Range: -40°C to 65°C

Dimensions: 21”H X 7.67”W X 14.6”D

Weight: 18lbs approx.

Dome Colors: Amber, Blue, Clear, Green, Purple and Red

Light Source/Lamp Style: Xenon Strobe Lamp

Lamp Life: 7,000 Hours

Candle Power: 50 effective candlepower (EFC)

Flash Rate/Minute: 60-80

Joules per Flash: 1.9

Sound Output: Up to 125dB(A) @ 1 meter

(Tone dependent)

5.0 Spare Parts List

354-4900x6-024 12-80VDC Strobe (x represents color of lamp)

Strobe colors: Red (2), Amber (4), Green (5), Blue (6), Magenta (7), and Clear (9)

356-DB3007-024 MEDC DB3 Horn – 12-48VDC

980-RSRK63-xxM Turck 6 conductor cable (for Quad and Dual Alarm Bar)

Where xxM= length: 02M=2meter, 10M=10meter, 15M=15meter

980-RSMRKM-xxM Turck 5 Conductor cable (Specifically for the Dual Alarm Bar)

Where xxM= length: 02M=2meter, 10M=10meter, 15M=15meter

Indice

Altri manuali Detcon Sistema di sicurezza

Detcon

Detcon SW-AV2-N4 Manuale utente

Detcon

Detcon X40-08-N4X Manuale utente

Detcon

Detcon 240 Manuale utente

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente